网络导航中基于SVG的地理空间数据组织与传输

介绍网络导航服务系统,通过对MapX Mobile、ArcPad和SVG的地理空间数据组织的比较,得出基于Mobile SVG的地理空间数据组织方式优于其它两种组织方式。它不但适合网络导航服务系统的数据交互操作,而且同一图幅的数据量也明显少于MapX Mobile、ArcPad两种格式的数据。然后利用gzip软件包对数据进行压缩,减少数据传输所需的时间。     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

禹城市城乡用地结构和布局分析

统筹城乡用地、优化城乡用地结构和布局,既是节约和集约用地的重要途径,又是统筹城乡发展的客观需要。通过分析禹城市城乡用地结构和布局,提出优化城乡用地结构和布局的建议和对策,从而为制定合理的土地利用总体规划提供基本的依据。     

浅析省级基础测绘数据在城市建模中的应用

利用基础测绘数据中房屋数据获取和编辑的方法,探讨1:10 000基础测绘数据中的建筑物在城市地理信息服务和建模中的应用以及目前基础测绘数据与城市建模数据间的差距.     

矿区控制网布网方案的选择

用计算机模拟法,讨论了控制网不同观测量的平差结果,提出了选择矿区控制网方案的原则.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

冀北榆树沟煤矿区褐煤地下气化地质条件分析

通过对冀北沽源县榆树沟煤矿白芈系青石砬组含煤地层地质条件进行分析,认为仵该矿区进行煤炭地下气化是可行的。研究区构造简单,为一轴向近东西向的舒缓向斜,主要煤层厚度大,最大平均厚度为24.31m。可采煤层顶板多为泥岩、炭质泥岩,尤其是煤系上覆的“三趾马红土”层,对气体有良好的圈闭作用。由于褐煤的灰分含量高,26％～49．03％,地下气化时对煤层顶板影响小,主要煤层埋藏浅200—300m,水文地质条件简单,根据诸多因素分析认为该矿区适合进行褐煤地下气化开采。     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

地震综合效应场函数及其在地震预报中的应用──（一）地震综合效应场函数及其计算方法

在系统地分析了目前各种测震学地震预报方法科学思路的基础上,认为测震学地震预报方法基本上可以分为两大类。一类是以已经发生的一些地震作为未来可能发生的地震的“因”,即由于已经发生的地震对区域应力场的影响,导致未来发生较强地震。这一类包括的预报方法较多,如空区、条带、ｂ值、地震迁移、相关地震等等及其由此衍生出来的各种方法。另一类是把已经发生的一些地震作为区域应力场增强的“果”,即已经发生的地震是区域应力场增强过程中的一种反映,而未来地震不一定是已经发生的地震所导致的结果。这一类包括“地震窗口”、小震群活动等方法。针对第一类方法,各种预报方法都是力图从地震三要素中提取未来地震的信息,而具体作法又都是利用地震三要素这个多维空间的某个剖面。为了从地震活动诸要素的多维空间提取综合信息,我们对每个地震加入了破裂面方位,构成了地震第四要素,并依据地震４要素建立了地震综合效应场函数。地震综合效应场函数概括了多种测震学地震预报方法的科学思路和预报经验,从而可以形成测震学的综合预报方法。