The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

数字地球与海洋科学的发展

本文从数字地球的概念出发，根据海洋科学的发展要求，详细论述了数字地球与海洋科学的发展关键。并提出了海洋科学的新的发展战略和配套技术的开发研究理论，从而为我国海洋事业的发展和数字地球的建立有一个协调和统一的认识观点。     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

长江口泥沙絮凝静水沉降动力学模式的试验研究

细颗粒泥沙在咸水中的絮凝沉降是河流泥沙向海输送过程中在河口区发生的重要现象，是河口拦门沙形成与发育的主要原因之一。本文根据室内模拟试验研究，提出长江口泥沙絮凝静水沉降的二级动力学模式，通过该式求得不同泥沙含量和盐度情况下絮凝沉降的衰减系数，半衰期和平均沉降速率等动力学参数，定量地分析泥沙含量和盐度对泥沙絮凝沉降过程的影响。     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

REE distribution in water-sediment interface system at deep ocean floor

ＲＥＥｄｉｓｔｒｉｂｕｔｉｏｎｉｎｗａｔｅｒ－ｓｅｄｉｍｅｎｔｉｎｔｅｒｆａｃｅｓｙｓｔｅｍａｔｄｅｅｐｏｃｅａｎｆｌｏｏｒ￥ＺｈａｎｇＬｉｊｉｅ；ＬｉｕＪｉｈｕａａｎｄＹａｏＤｅ（ＲｅｃｅｉｖｅｄＦｅｂｒｕａｒｙ１，１９９４；ａｃｃｅｐｔｅｄＭａｙ...     

黄茅海河口湾现代动力地貌体系和冲淤过程分析

1980—1993年对黄茅海河口湾进行沉积物采样和水流测定及水深测量。根据水动力和地形条件，冲淤分析及Mclaren模型研究河口湾的动力地貌体系、冲淤特征和现代沉积物运移。结果表明：（1）水下地形主要为下泄流或上溯流控制的“深槽－槽沟－浅滩－湾口”的动力地貌体系，反映了河口湾“东进西出”的水流格局；（2）整个河口湾以淤积为主，只有崖门深槽有较明显的优势冲刷特征，并随着崖门深槽向海推移和河口湾“东进西出”水动力作用，黄茅海落潮三角洲相应向西南进积；（3）应用Mclaren模型揭示了黄茅海河口湾现代沉积物运移规律，同样反映了河口湾具有“东进西出”的运移趋势。