河北兴隆洞子沟银-铜矿床地质特征及成因探讨

根据矿床地质特征、成矿温度、成矿时代及成矿物质来源等方面的研究，认为本矿床成矿流体来源于地慢岩浆水，并有海水混入。成矿物质主要来源于深部地壳和地慢，通过同生断裂喷气—喷流作用，在有利的地层和物理化学条件下沉淀成矿。矿床成因属于同生断裂喷流热液层控矿床。     

新疆富蕴县柯鲁木特锂-钽-铌矿床228号脉地质特征分析

通过对柯鲁木特锂-钽-铌矿床228号矿脉的普查，发现该矿脉锂、钽、铌的含量较高，矿脉规模大。为了进一步在该区开展找矿工作，阐述了228号含矿伟晶岩脉的共生结构分带的产出特征、结构带内部特征、稀有元素含量变化及其不同矿化类型等，在总结了228号及其相似的113号、116号含矿伟晶岩脉成矿地质背景的基础上，指出伟晶岩的主要形成阶段和矿化阶段是在一个比较封闭的地质环境中生成的，并认为含矿伟晶岩脉的形成与二云母二长花岗岩有着密不可分的关系。     

豫西金矿类型划分

豫西金矿矿床类型复杂，在前人的金矿床类型划分的基础上，根据豫西金矿床明显的野外地质特征，提出了豫西金矿类型划分方案，并对各金矿床类型的地质特征进行了简述，同时，对它们之间的共性作了总结。指出：豫西各类金矿类型之间既存明显的区别又具有密切的时间和空间上的成因联系，这一特点对用于拓宽该地区进一步的金矿找矿思路是十分必要的。     

SH波对无限介质土中衬砌结构的动应力集中

运用复变函数法和保角映射法对无限介质土中的衬砌结构进行分析.通过引入两个势函数将弹性介质的控制方程解耦成两个Helmholtz方程.利用所得势函数的通解,得到无限土介质和衬砌结构的位移和应力的表达式,利用无限介质与衬砌结构之间的连续性条件和衬砌结构内边界上的边界条件,可确定波函数展开式中的末知系数,并给出动应力集中系数的数值结果.     

龙首二级面板堆石坝三维真非线性地震反应分析和评价

基于土石料三维粘弹塑性动力本构模型,并采用新型三维各向异性有厚度薄单元来模拟面板和堆石的接触面特性,建立了高面板堆石坝地震反应分析的三维真非线性动力分析方法.利用坝料动力特性的大型三轴试验成果,分析计算了龙首二级(西流水)面板堆石坝的地震反应,主要包括加速度反应、堆石体应力反应及坝体单元抗震安全系数、面板应力反应和变形及接缝位移、高趾墙动力反应等.为大坝的抗震设计提供了有力的技术依据.     

水位下降卸荷诱发库岸边坡快速失稳机理分析

本文以某工程现场岩质边坡为例，采用与传统裂隙水压力分布不同的水压力分布方式和边坡裂隙中可能发生的水锤效应相耦合，分析研究了岩质边坡发生滑动的机理及稳定性。研究表明，本文所采用的水压力分布方式较为符合边坡中的水压力分布实际情况，可以给出一个较为合理的稳定系数。当考虑水锤效应时，岩质边坡的稳定系数大大降低，说明水锤效应加剧了边坡破坏失稳的过程。本文所采用的水压力分布方式与边坡裂隙中的水锤效应相耦合的计算方法，在边坡稳定性分析中具有参考意义。     

天津泰达地区粉土振动液化特性的研究

本文以动三轴试验和原位测试数据为基础，以天津地区砂性土为例，探讨砂性土振动液化机理及孔隙水压力变化规律，采用多种方法分析判别砂性土液化，为高烈度地区重要工程建筑抗震设计提供重要数据。     

金丽温高速公路K81高边坡变形动态数值分析

对金丽温高速公路K81高边坡进行接触大变形有限元动态数值分析.结果表明,路堑边坡开挖,导致滑面的法向应力减小、抗滑力下降,是引起古滑坡复活的根本原因.研究结果也说明了接触大变形有限元分析方法可以较好地分析潜在滑面的力学作用,是研究滑坡的滑动机理的有效方法.     

增量位移反分析在水电地下洞室工程中的应用

反分析是确定计算模型参数的有效方法.通常多采用量测所得全量位移进行反演计算.但地下工程中许多量测数据为增量位移,且实际施工过程可以通过建立分步开挖的有限元模型来模拟.据此,结合某水电站地下洞室工程中地下厂房的开挖,建立了模拟动态施工的有限元模型,利用某一开挖步施工前后量测值之差,采用增量位移优化反分析方法对洞室附近初始地应力场及围岩弹性模量进行了反演.计算所得增量位移与实测值符合较好,表明了这种方法的可行性.同时,根据分析结果对该方法进行了评价.     

Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.