预测陕西关中地区需水量的改进GM(1,1)模型

需水量评价与预测是水资源规划与管理一项重要的研究内容。本文采用定额法计算需水量。通过对陕西关中地区需水量要素组成的分析,认为需水量要素属平稳时间序列,且一阶累加生成数据系列满足指数规律,符合灰色预测条件。为了提高GM(1,1)模型的精度,采用一种改变背景值的新方法,即:中心逼近方法。通过精度检验,中心逼近式GM(1,1)模型平均误差百分比、误差平方和分别比传统的GM(1,1)模型提高了0.147和1.579。用中心逼近式GM(1,1)模型预测需水量各要素近期和中长期值,经检验,其中非农业人口、农业人口、耕地面积、工业总产值预测模型满足一级模型,等级为良好。牲畜头数预测模型为不合格模型,分析其原因,主要是因为时间序列数据不完全符合指数规律。通过定额法计算,预计75%保证率时2005年和2010年关中地区工农业需水量分别占总需水量的92.21%和89.75%,生活需水量分别占7%和9.04%。     

Mais comment s'écoule donc un glacier ? Aperçu historique

Ice and snow have often helped physicists understand the world. On the contrary it has taken them a very long time to understand the flow of the glaciers. Naturalists only began to take an interest in glaciers at the beginning of the 19th century during the last phase of glacier advances. When the glacier flow from the upslope direction became obvious, it was then necessary to understand how it flowed. It was only in 1840, the year of the Antarctica ice sheet discovery by Dumont d'Urville, that two books laid the basis for the future field of glaciology: one by Agassiz on the ice age and glaciers, the other one by canon Rendu on glacier theory. During the 19th century, ice flow theories, adopted by most of the leading scientists, were based on melting/refreezing processes. Even though the word ‘fluid’ was first used in 1773 to describe ice, more the 130 years would have to go by before the laws of fluid mechanics were applied to ice. Even now, the parameter of Glen's law, which is used by glaciologists to model ice deformation, can take a very wide range of values, so that no unique ice flow law has yet been defined. To cite this article: F. Rémy, L. Testut, C. R. Geoscience 338 (2006).     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

The 3D simulation and optimized management model of groundwater systems based on eco-environmental water demand

Through the study of mutual process between groundwater systems and eco-environmental water demand, the eco-environmental water demand is brought into groundwater systems model as the important water consumption item and unification of groundwater’s economic, environmental and ecological functions were taken into account. Based on eco-environmental water demand at Da’an in Jilin province, a three-dimensional simulation and optimized management model of groundwater systems was established. All water balance components of groundwater systems in 1998 and 1999 were simulated with this model and the best optimal exploitation scheme of groundwater systems in 2000 was determined, so that groundwater resource was efficiently utilized and good economic, ecologic and social benefits were obtained.     

洛阳市水资源可利用量研究

以洛阳市为对象，对区域水资源的可利用量进行了研究。区域水资源量包括地表水实际可利用量和地下水实际可利用量。将地表径流中基流部分按比例划出，与河道汛期弃水量加在一起作为河道的生态需水量，从地表水资源量中扣除生态需水量后可得地表水的实际可利用量。将难以利用的地下水量从地下水资源量中扣除后可得地下水实际可利用量。     

A unified formulation of the piecewise exact method for inelastic seismic demand analysis including the P‐delta effect

The non‐linear analysis of single‐degree‐of‐freedom (SDOF) systems provides the essential background information for both strength‐based design and displacement‐based evaluation/design methodologies through the development of the inelastic response spectra. The recursive solution procedure called the piecewise exact method, which is efficiently used for the response analysis of linear SDOF systems, is re‐formulated in this paper in a unified format to analyse the non‐linear SDOF systems with multi‐linear hysteresis models. The unified formulation is also capable of handling the P‐delta effect, which generally involves the negative post‐yield stiffness of the hysteresis loops. The attractiveness of the method lies in the fact that it provides the exact solution when the loading time history is composed of piecewise linear segments, a condition that is perfectly satisfied for the earthquake excitation. Based on simple recursive relationships given for positive, negative and zero effective stiffnesses, the unified form of the piecewise exact method proves to be an extremely powerful and probably the best tool for the SDOF inelastic time‐history and response spectrum analysis including the P‐delta effect. A number of examples are presented to demonstrate the implementation of the method. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

现代区域开发的矿产资源需求生命周期研究及意义

矿产资源是社会经济发展的重要物质基础，受社会经济和科学技术发展的限制，各类矿产资源的需求存在着从初始，增长，停滞和衰落的周期性变化以及明显的空间分嘏差异。