Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Towards a method for postcolonial development geography? Possibilities and challenges

In this paper we explore the contours of a 'method' for postcolonial development geography, which makes it possible to imagine another 'world-picturing'. We suggest three steps towards such a method. First, we propose that a postcolonial method involves thinking about why we are doing research in the south in the first place; how we come to and produce our questions; and how we analyze and represent our findings based on our subject positionings. Second, that we need to recognize theorization as an inherent part of method, rethink how we currently theorize and reconfigure our methods of theorization to address wider political aims. Problematizing theorization helps challenge the universalism of Eurocentric theories, thus enabling development geography to move towards more decolonized versions and visions. Finally, that this must be accompanied by firmer recognition of our multiple investments – personal, institutional and geopolitical – and how they frame the possibilities for change. These are some possible steps that we think can reconfigure the 'scholarly track' that postcolonial development geographers traverse.     

基于有限差分法的抗滑桩计算机辅助设计

基于地基系数“m-m”法、“m-k”法、“k-k”法的原理,考虑桩顶和桩底边界条件以及桩在滑动面处位移、转角、弯矩和剪力的连续条件,可解得桩身各节点的位移和内力,提出了进行抗滑桩全桩内力计算的有限差分法。根据差分方程并用VB6.0编制了实用的计算程序,既可避免繁琐的查表计算,提高计算速度,又可提高计算精度,直观生动,真正实现了人机交互,在界面的引导下,设计人员可完成全部计算,并绘出内力图形和抗滑桩截面配筋图,使设计更方便快捷,该软件可以极大地提高生产效率,降低工程造价,从而实现抗滑桩的优化设计。最后采用上述方法对某滑坡的悬臂抗滑桩进行了设计与计算。     

福建平潭虎潮山滑坡成因机理分析与评价

虎潮山滑坡位于平宏公路12k 704~12k 884段北侧山坡体上,是平潭海岛通往陆地的唯一公路通道。论文通过定性的工程地质分析和定量计算评价了虎潮山坡体稳定性的变化趋势,提出改建公路超挖深切坡脚和持续长时间强降雨导致的孔隙水压力作用是边坡发生滑动破坏的主要因素。     

惯性／双星组合导航系统的滤波与仿真

介绍了惯性导航系统和双星导航系统各自的运行方式和优缺点；详细推导了组合导航系统的误差方程和量测方程；介绍了Kalman滤波的整个过程并最后进行了仿真计算。仿真结果显示，惯性导航系统和双星导航系统的组合弥补了各自的不足，具有较好的精度和可靠性。     

航天INSAR复影像对的自动快速匹配

针对航天INSAR主、辅影像数据的特点，提出了加大匹配窗口、加大锚点间隔的匹配策略，以提高匹配的可靠性和速度。在匹配过程中，综合利用轨道参数和强度影像金字塔进行粗匹配，并对强度影像采用相关系数与最小二乘相结合的双向匹配方案，实现了自动、快速、高可靠性和高精度的航天INSAR复影像匹配。最后总结了航天INSAR复影像匹配的特点。     

可控深度电法对水平柱体和垂直界面的计算和实验

球状地球体可控深度电法的效应系数可近似地全面表达可控深度电法和各种效应。通过点源二度体的电算模拟实验，证明了该方法在水平柱状体和地下存在电阻率垂直界面的条件下，也是有效的。     

遗传算法在边坡数值计算中的应用

改进了进化方向的遗传算法与有限元数值法，结合并研制了相应的软件。应用该软件对多类型岩土边坡进行弹性模量、内聚力、内摩擦角等参数反演分析，显示误差很小，收敛速度也很快，这说明改进进化方向遗传算法这种新型的优化算法在多类型岩土参数优化估计中具有独特的优势。