平南幔源包体中橄榄石的显微构造研究及其意义

平南玄武岩中的尖晶石二辉橄榄岩包体的平衡温度为930~980℃, 平衡深度为59~74km, 包体中橄榄石的扭折带滑移系多为(010) [100], 但也有(001) [100]的滑移系类型; 斜方辉石的滑移系为(100) [001], 它们均为高温低应变速率下的滑移系, 说明该区的上地幔主要是在高温低应变速率条件下经历了塑性变形作用.橄榄石位错组态多样, 有自由位错、位错壁、位错弓弯、缠结、{110}滑移带, 反映了上地幔的塑性变形特征.根据位错壁的大小估算, 上地幔差异流动应力为24.5~42.1MPa, 流动速率为2.93×10-17~8.36×10-16s-1, 有效粘度为1.72×1023~2.80×1024 Pa·s, 特征与中国东部新生代上地幔较为一致, 反映同处于拉张环境.      

西藏东巧方辉橄榄岩的显微构造特征及其流变学意义

西藏东巧地区蛇绿岩套中橄榄岩是青藏高原出露的为数不多的地幔岩体之一, 对于揭示该地区的上地幔流变学特征具有重要意义.报道了该地区方辉橄榄岩中橄榄石的位错显微构造特征, 估算了上地幔流变学参数.显微构造研究表明, 东巧方辉橄榄岩发育残斑结构, 橄榄石中位错组态类型比较丰富, 包括自由位错、位错壁(包括宽阔型和紧密型)、位错弓弯和位错网, 表明橄榄石的主导变形机制可能为位错蠕变.该区地幔岩变形大致分为2个阶段: (1) 地幔缓慢塑性流动变形, 形成宽阔型位错壁; (2) 蛇绿岩侵位过程中的变形, 产生紧密型位错壁.根据2种位错壁估算的流动应力平均值分别为3 9.3MPa (宽阔型)和113.9MPa (紧密型), 计算结果获得东巧地区上地幔流动速率为1.13× 10-12 ~ 2.95× 10-11s-1, 有效粘度为4.44×1017~ 1.16×1019Pa°s, 这些参数为东巧地区上地幔物理特征提供了流变学的约束条件      

Differences between CMIP6 and CMIP5 Models in Simulating Climate over China and the East Asian Monsoon

We compare the ability of coupled global climate models from the phases 5 and 6 of the Coupled Model Intercomparison Project(CMIP5 and CMIP6, respectively) in simulating the temperature and precipitation climatology and interannual variability over China for the period 1961–2005 and the climatological East Asian monsoon for the period1979–2005. All 92 models are able to simulate the geographical distribution of the above variables reasonably well.Compared with earlier CMIP5 models, current CMIP6 models have nationally weaker cold biases, a similar nationwide overestimation of precipitation and a weaker underestimation of the southeast–northwest precipitation gradient, a comparable overestimation of the spatial variability of the interannual variability, and a similar underestimation of the strength of winter monsoon over northern Asia. Pairwise comparison indicates that models have improved from CMIP5 to CMIP6 for climatological temperature and precipitation and winter monsoon but display little improvement for the interannual temperature and precipitation variability and summer monsoon. The ability of models relates to their horizontal resolutions in certain aspects. Both the multi-model arithmetic mean and median display similar skills and outperform most of the individual models in all considered aspects.     

Source identification of PM2.5 particles measured in Gwangju, Korea

The UNMIX and Chemical Mass Balance (CMB) receptor models were used to investigate sources of PM_2.5 aerosols measured between March 2001 and February 2002 in Gwangju, Korea. Measurements of PM_2.5 particles were used for the analysis of carbonaceous species (organic (OC) and elemental carbon (EC)) using the thermal manganese dioxide oxidation (TMO) method, the investigation of seven ionic species using ion chromatography (IC), and the analysis of twenty-four metal species using Inductively Coupled Plasma (ICP)-Atomic Emission Spectrometry (AES)/ICP-Mass Spectrometry (MS). According to annual average PM_2.5 source apportionment results obtained from CMB calculations, diesel vehicle exhaust was the major contributor, accounting for 33.4% of the measured PM_2.5 mass (21.5 μg m^− 3), followed by secondary sulfate (14.6%), meat cooking (11.7%), secondary organic carbon (8.9%), secondary nitrate (7.6%), urban dust (5.5%), Asian dust (4.4%), biomass burning (2.8%), sea salt (2.7%), residual oil combustion (2.6%), gasoline vehicle exhaust (1.9%), automobile lead (0.5%), and components of unknown sources (3.4%). Seven PM_2.5 sources including diesel vehicles (29.6%), secondary sulfate (17.4%), biomass burning (14.7%), secondary nitrate (12.6%), gasoline vehicles (12.4%), secondary organic carbon (5.8%) and Asian dust (1.9%) were identified from the UNMIX analysis. The annual average source apportionment results from the two models are compared and the reasons for differences are qualitatively discussed for better understanding of PM_2.5 sources.Additionally, the impact of air mass pathways on the PM_2.5 mass was evaluated using air mass trajectories calculated with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) backward trajectory model. Source contributions to PM_2.5 collected during the four air mass patterns and two event periods were calculated with the CMB model and analyzed. Results of source apportionment revealed that the contribution of diesel traffic exhaust (47.0%) in stagnant conditions (S) was much higher than the average contribution of diesel vehicle exhaust (33.4%) during the sampling period. During Asian dust (AD) periods when the air mass passed over the Korean peninsula, Asian dust and secondary organic carbon accounted for 25.2 and 23.0% of the PM_2.5 mass, respectively, whereas Asian dust contributed only 10.8% to the PM_2.5 mass during the AD event when the air mass passed over the Yellow Sea. The contribution of biomass burning to the PM_2.5 mass during the biomass burning (BB) event equaled 63.8%.     

2050年前中国雾日变化趋势的预估

 利用1971-2005年中国591个气象台站的雾日资料以及逐日最低气温、相对湿度、平均风速资料,分析了35 a来中国各区域年雾日数与这些因子的相关关系,并利用IPCC第四次评估报告所提供的模式数据资料,针对3种不同的排放情景,对21世纪上半叶各区域年平均雾日进行预估。结果表明：对划分的9个雾区的年雾日数的回归方程的拟合效果较好,可以用来进行预估;未来50 a中国大部分地区雾日呈明显减少的变化趋势,在A1B,A2和B1情景下,雾日减少的平均幅度分别为16.2%,13.4%和12.9%。未来50 a中国雾日预估结果的空间分布显示：3种情景下未来中国大部分雾区雾日数都将减少,个别地区雾日数有增加趋势,其中A1B情景下雾日减少区的减少趋势最明显,而B1情景下雾日增加区的增加趋势最明显。     

Microwave Simulations of Precipitation Distribution with Two Radiative Transfer Models

Two microwave radiative transfer models of precipitating cloud are used to simulate the microwave upwelling radiances emerging from precipitating clouds. Comparison of the simulation results shows that significant difference of microwave upwelling radiances exists between these two radiative transfer models. Analysis of these differences in different cloud and precipitation conditions shows that it is complicated but has certain trend for different microwave frequencies. The results may be useful to quantitative rainfall rate retrieval of real precipitating clouds.     

CMIP5模式对东太平洋ITCZ偶极子模态模拟能力的评估

本研究利用第五次国际间耦合模式比较计划(Coupled Model Intercomparison Project phase 5, CMIP5)中的24个模式的工业革命前控制试验(Pre-industrial Control, picontrol)模拟结果, 结合观测资料, 评估了24个CMIP5 模式对东太平洋热带辐合带偶极子(Eastern Pacific ITCZ dipole, EPID)降水模态的模拟能力, 并建立了其与模式对热带太平洋气候态模拟之间的联系。结果表明: 1) 绝大多数模式在北半球春季(2—4月)对EPID模态模拟能力较差, 主要原因在于CMIP5模式对热带辐合带(Intertropical Convergence Zone, ITCZ)的模拟偏差, 其中模拟效果较差的模式在2—4月的气候态降水分布在赤道以南, 且降水普遍偏强; 2) 对各模式的EPID模态选取的季节按照技巧评分最高进行调整后, 大部分模式能较好地模拟出EPID模态的空间分布特点, 技巧评分在0.6以上, 其中模拟效果好的模式(技巧评分大于0.7)中EPID模态出现的月份同时在中东太平洋气候态表现出“双ITCZ”特征, 且多模式集合结果的模拟误差小于绝大多数模式。     

遥感蚀变信息检测中背景与干扰问题研究

在不同自然景观区的遥感蚀变信息检测中,背景与干扰是2个复杂而又容易混淆的研究对象。本文结合光谱混合模型理论与随机变量概率分布相关理论,深入分析了遥感数据的光谱空间几何结构特征(重点剖析二维散点图),系统研究了背景与干扰的关系、复杂度以及干扰地物类型的划分等问题。这些问题的探讨为遥感蚀变信息检测的最佳方案设计和蚀变信息潜在性评价与准确提取提供了技术思路。     

长白山区热量资源立体分布模式及其应用

采用二次趋势势面函数模拟长白山区热量资料的地理分布，用地理细网格分析方法推算山区各地的热量资源状况，并以此为基本依据，分析山区主要农作物品种的合理布局，指出不同品种在各地的适宜种植高度带，该项分析了已长白山区气候及农业资源立体开发中的发挥作用。     

鱼类形态特征与营养级位置之间关系初探

以长江中下游洪泛平原湖泊鱼类为例,探讨鱼类功能性形态特征与其营养级位置之间的关系.所用的116种鱼的食性数据来自于226个鱼类群落,总计16267尾鱼.用几何形态测量法的界标分析法提取鱼类形态特征,相对扭曲度法的前2个主成份能较好地区分鱼类的形态差异,它不仅能够生成散点图,而且能客观地反映出鱼类的形态性状.营养级位置采用肠含物定量分析法,合理地假定肠含物的营养级位置,利用食性数据计算出鱼类的营养级位置.采用广义加性模型分析鱼类营养级位置与功能性形态之间的关系.结果表明:只有当鱼类为植食性鱼类和肉食性鱼类才有特化的功能性形态与之相适应,植食性鱼类有较窄的口裂,而对肉食性鱼类而言,不同生活型的鱼类拥有各自特化的形态特征,如伏击型肉食性鱼类体型呈纺锤形,背鳍靠近头部,眼睛较大且靠上,头部面积较大;而追击型肉食性鱼类体型呈流线型,头部较小,背鳍和腹鳍靠近尾部.而杂食性鱼类在本研究中无更多证据证明有特化的外部形态,亟待进一步研究.