High-resolution record of tectonic and sedimentary processes in growth strata

Growth strata are used to determine the kinematics of synsedimentary structures such as faults. Classical methods of analysis such as thickness versus throw plot consider that the available space created by fault slip in the hanging wall of faults is instantaneously filled up by sediments. This has lead many previous works to identify a cyclic activity for growth faults. Here we perform a careful analysis of the variation of strata thicknesses on each side of a very well documented normal growth fault in the Niger delta. We show that these thickness variations are induced by the alternation of sedimentary processes during continuous fault slip. Suspended-load processes induce either uniform or slightly variable thickness of a large majority of mudstone layers. Bedload processes result in a preferential thickening of sand layers in the hanging wall. These high quality data thus provide strong grounds for doubting the polycyclic growth diagnosed for some faults at the scale of sedimentary cycles and supports the notion that fault displacement rates can be very well behaved. Our study emphasizes the important conclusion that stable fault growth, and related displacement rates, can appear to be punctuated when viewed at the scale of sedimentary cycles. It follows that care should be taken when attempting to derive displacement rates on temporal scales equivalent to those of alternating sedimentological cycles.     

雄安新区牛东断裂带碳酸盐岩热储探测及其对地热勘探的启示

雄安新区在暂不考虑开采砂岩热储地热资源的前提下,探明碳酸盐岩热储东部边界断裂牛东断裂带的分布位置与地热资源品质,对新区地热资源开发利用规划的编制与整体能源利用布局均有着重要意义。以雄安新区高铁片区第一口碳酸盐岩热储勘探井D09孔的探测数据为依据,结合地震剖面解释成果,分析了牛东断裂带内碳酸盐岩热储的空间展布特征、储集层物理性质与单井产能参数,并简述其对地热勘探的指导意义。探测结果表明,牛东断裂带的碳酸盐岩热储主要为蓟县系雾迷山组含硅质的白云岩,分布在断裂西侧基岩宽缓背斜顶部,层状稳定,厚约2000m,顶板埋深1000~1200m,井口水温约70℃,单井水量约102m3/h。D09孔揭示,在距风化壳顶部678m的地层内共发育122个裂隙带,累计厚度达251.20m,裂隙发育率37%,平均孔隙度9.26%,裂隙发育率与平均孔隙度明显比断裂带外地热井高出50%。D09孔与牛东断裂带周缘地热井的地层地温梯度、地热水水化学特征、储集层导水系数等对比分析表明,垂直断距达7000m的牛东断裂带是一条导水导热的盆内隐伏型深断裂,其限定了雄安新区碳酸盐岩热储含水系统的东部边界,构成了西侧牛驼镇凸起的导水通道与东侧霸县凹陷油气运移的阻隔屏障,控制了牛驼镇凸起面积达1000km2的整装地热田的形成。     

1605年海南岛琼州大地震及其发震构造的初步探讨

琼北地区铺前−清澜断裂是一条关系到1605年琼山7½级大地震发震构造判断的重要断裂。为准确厘定该断裂的最新活动特征,针对琼北地区第四纪玄武岩盖层和巨厚海相砂沉积等地质条件,采用大吨位震源的浅层人工地震勘探和小间距钻孔联合地质剖面探测相结合的方法,分别在海口江东三江镇岐山头村和东寨村展开探测。结果表明：(1) 铺前−清澜断裂断错了多个标志地层,最浅断错至全新统烟墩组淤泥层,上断点埋深10 m左右,钻探所揭示的断层面明显具有走滑兼具逆冲性质,是一条具有一定宽度、多分支、多期次活动的大规模断裂带;(2)钻孔联合地质剖面所揭示的地层深度范围内,被断错地层的位移量随着深度增加而加大,铺前−清澜断裂自8 346~7 153 a cal BP以来有过活动,全新世累计垂直位移量4~5 m,垂直位移速率为0.53~0.63 mm/a,推断其为1605年琼山大地震的发震断裂。本研究取得的铺前−清澜断裂全新世活动的新证据,为国土空间规划和区域地震危险性评价提供了科学依据。

     

Oil migration driven by exhumation of the Canol Formation oil shale: A new conceptual model for the Norman Wells oil field,northwestern Canada

Thermal history, petroleum system, structural, and tectonic constraints are reviewed and integrated in order to derive a new conceptual model for the Norman Wells oil field, and a new play type for tectonically active foreland regions. The thermal history recorded by Devonian rocks suggests that source rocks experienced peak thermal conditions in the Triassic–Jurassic, during which time oil was likely generated. After initial oil generation and expulsion, the Canol Formation oil shale retained a certain fraction of hydrocarbons. The shallow reservoir (650–350 m) is a Devonian carbonate bank overlain by the Canol Formation and resides within a hanging wall block of the Norman Range thrust fault. Both reservoir and source rocks are naturally fractured and have produced high API non-biodegraded oil. Thrust faults in the region formed after the Paleocene, and a structural cross-section of the field shows that the source and reservoir rocks at Norman Wells have been exhumed by over 1 km since then.The key proposition of the exhumation model is that as Canol Formation rocks underwent thrust-driven exhumation, they crossed a ductile–brittle transition zone and dip-oriented fractures formed sympathetic to the thrust fault. The combination of pore overpressure and new dip-directed subvertical fractures liberated oil from the Canol Formation and allowed for up-dip oil migration. Reservoir rocks were similarly fractured and improved permeability enhanced charging and pooling of oil. GPS and seismicity data indicate that strain transfer across the northern Cordillera is a response to accretion of the Yakutat terrane along the northern Pacific margin of North America, which is also the probable driving force for foreland shortening and rock exhumation at Norman Wells.     

Origin of transverse folds in an extensional growth-fault setting: Evidence from an extensive seismic volume in the western Gulf of Mexico

Growth faults in gravity-driven extensional provinces are dominated by coast-parallel trends, but coast-perpendicular (transverse) trends are far less documented. The Clemente–Tomas fault in the inner Texas shelf has corrugations that are transverse to the fault and that plunge downdip. A large (8500 km²), high-quality, 3D seismic survey allows a uniquely encompassing perspective into hanging-wall deformation above this corrugated fault surface. Synextensional strata in the hanging wall are folded into alternating transverse ridges and synclines, typically spaced 10 km apart. Forward modelling in dip profiles of an extensional fault having three ramps produces ramp basin-rollover pairs that compare with the seismically revealed ridges and synclines. As they translated down the undulose fault plane, ramp basins and rollovers were juxtaposed along strike, forming the hanging-wall ridges and synclines observed offshore Texas. Fault-surface corrugations correlate broadly with footwall structure. We infer that corrugations on the Clemente–Tomas fault formed by evacuation of an allochthonous salt canopy emplaced in the late Eocene to early Oligocene. Early salt evacuation (Oligocene) created an undulose topography that influenced incipient Clemente-Tomas fault segments as they merged to form an inherently undulose fault. Late salt evacuation (early Miocene) further deformed this fault surface.     

Delineation of the 85°E ridge and its structure in the Mahanadi Offshore Basin,Eastern Continental Margin of India (ECMI), from seismic reflection imaging

The passive Eastern Continental Margin of India (ECMI) evolved during the break up of India and East Antarctica in the Early Cretaceous. The 85°E ridge is a prominent linear aseismic feature extending from the Afanasy Nikitin Seamounts northward to the Mahanadi basin along the ECMI. Earlier workers have interpreted the ridge to be a prominent hot spot trail. In the absence of conclusive data, the extension of the ridge towards its northern extremity below the thick Bengal Fan sediments was a matter of postulation. In the present study, interpretation of high resolution 2-D reflection data from the Mahanadi Offshore Basin, located in the northern part of the ridge, unequivocally indicates continuation of the ridge across the continent–ocean boundary into the slope and shelf tracts of the ECMI. Its morphology and internal architecture suggest a volcanic plume related origin that can be correlated with the activity of the Kerguelen hot spot in the nascent Indian Ocean. In the continental region, the plume related volcanic activity appears to have obliterated all seismic features typical of continental crust. The deeper oceanic crust, over which the hot spot plume erupted, shows the presence of linear NS aligned basement highs, corresponding with the ridge, underlain by a depressed Moho discontinuity. In the deep oceanic basin, the ridge influences the sediment dispersal pattern from the Early Cretaceous (?)/early part of Late Cretaceous times till the end of Oligocene, which is an important aspect for understanding the hydrocarbon potential of the basin.     

福州盆地及其周围地区地壳深部结构与构造的初步研究

1986—1988年,福建省地震局在福州盆地及其周围地区完成了五条地震测深剖面:宁德—永春剖面;洪懒—宁德剖面;莲峰—福州（尚干）剖面;南平—永泰—平潭非纵剖面;并在宁德—古田—嵩口首次试验扇形剖面观测系统,结果表明,扇形剖面对确定断裂是有效的. 根据对地震波走时的正、反演计算,用理论地震图和射线追踪方法进一步修改和完善,得到了福州盆地及其周围地区地壳深部为高、低速相间的速度分布特征.地壳介质速度为6.40km/s,在中地壳普遍发育一层速度为5.80—5.90 km/s、厚度约5.0 km的低速层.Moho面深度30—33 km,福州盆地为一Moho面隆起区,隆起幅度达3.0 km.北西向断裂发育,其中,闽江断裂在纵剖面和扇形剖面均有明显的反映,并切割到Moho面2.0—3.0 km. 反射波谱频方法计算得到福州盆地地壳Q值仅120—150,比邻近地区明显偏低,中地壳低速层Q值为40—80,是一典型的低速—高导—低Q（高衰减）结构层,此层上界面埋深14—15 km,与居里面埋深较一致.这些结果为福州地区的地热资源远景预测和开发提供了地壳深部结构和某些地球物理场背景.     

基于CTI技术的守时系统故障报警实现

介绍了计算机电话集成(CTI-Computer Telephony Integration)技术在守时系统故障自动报警中的应用。简要介绍了构成报警系统的两个关键产品，电话语音卡和TTS(Text-To-Speech)，详细讨论了ActiveX控件(Phonic．OCX)编程接口的一系列事件和方法以及由此而开发的故障报警模块。该模块不仅用于守时主系统的故障报警，也将用于电源系统、钟房环境监控系统的故障报警。     

Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.