Application of an improved semi-Lagrangian procedure to fully-nonlinear simulation of sloshing in non-wall-sided tanks

The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks.     

Diagenetic evolution of the upper Cretaceous limestone and sandstone exhumed reservoirs in the western Basque–Cantabrian Basin,North Spain

The Basque–Cantabrian Basin (NE Spain) has been considered one of the most interesting areas for hydrocarbon exploration in the Iberian Peninsula since the 60th to 70th of last century. This basin is characterized by the presence of numerous outcrops of tar sands closely associated with fractures and Triassic diapirs. The aims of this work is to establish the diagenetic evolution of the Upper Cretaceous reservoir rocks with special emphasis in the emplacement of oil and their impact on reservoir quality. The studied rocks are constituted of carbonates and sandstones that contain massive quantities of bitumen filling vugs and fractures.Petrographic results indicate that the carbonate rocks from Maestu outcrops are bioclastic grainstones and wackestones, whereas the tar sandstones from Atauri and Loza outcrops are dominated by quartzarenites and subordinated subarkoses. The paragenetic sequence of the main diagenetic phases and processes include, pyrite, bladed and drusy calcite cement, calcite overgrowths, silicification of bioclasts and microcrystalline rhombic dolomite cement, and first stage of oil emplacement, blocky calcite cement, coarse crystalline calcite cement, calcitized dolomite, calcite veins, saddle dolomite and stylolites filled by the second phase of oil entrance. Together with the above mentioned diagenetic alterations, the arenites are affected by early kaolinitization of feldspars and the scarce formation of clay rim and epimatrix of illite. All sandstones and dolomitized carbonate rocks show high intercrystalline and intergranular porosity which is full by biodegraded hydrocarbons (solid bitumen). The biodegradation affects alkanes, isoprenoids and partially hopanes and steranes saturated hydrocarbons. Aromatics hydrocarbons, like naphthalenes, phenanthrenes, dibenzothiophenes and triaromatics are also affected by biodegradation. Results indicate that the first HC emplacement corresponds to early stage of calcite and dolomite cementation, and the second and more important emplacement is related to fracturation processes resulting in the formation of excellent reservoirs.     

Innovation for sustainable energy from a pro-poor perspective

The development and transfer of clean energy technologies to achieve universal energy access is challenging due to the inherent complexities of the energy sector, and the energy governance and financial systems in developing economies. Innovation is an essential part of successfully addressing these difficulties. Duplicating the energy infrastructure models of developed countries will not be sufficient to meet the needs of poor consumers. To the extent that innovation can accelerate energy access, it is important to understand the specific types of innovations that are necessary and how they might be facilitated. The general features of existing international clean energy innovation systems, which are predominantly driven by the markets and emissions reduction mechanisms of developed and rapidly growing emerging economies, are reviewed and the alignment of these systems to the innovation processes required to extend energy access globally is evaluated. Drawing on the innovation policy literature, the attributes of effective international and domestic energy innovation systems that are pro-poor and the associated policy approaches are identified.     

Scientists’ framing of the ocean science–policy interface

Scientists’ ideas, beliefs, and discourses form the frames that shape their choices about which research to pursue, their approaches to collaboration and communicating results, and how they evaluate research outputs and outcomes. To achieve ocean sustainability, there are increasing calls for new levels of engagement and collaboration between scientists and policy-makers; scientists’ willingness to engage depends on their current and evolving frames. Here, I present results about how scientists involved in diverse fields of ocean research perceived their role as scientists working at or near the ocean science–policy interface and how this related to their perceptions regarding ocean research priorities. The survey of 2187 physical, ecological and social scientists from 94 countries showed that scientists held different perspectives about their appropriate level of engagement at the ocean science–policy interface and the relative primacy of science versus politics in formulating ocean policy. Six clusters of scientists varied in their frames; three clusters accounted for 94% of the sample. Of 67 research questions identified from 22 research prioritization and horizon scanning exercises, the top eight were shared among all three clusters, showing consistency in research priorities across scientists with different framings of their role at the science–policy interface. Five focused on the mechanisms and effects of global change on oceans, two focused on data collection and management for long-term ocean monitoring, and one focused on the links between biodiversity and ecological function at different scales. The results from this survey demonstrated that scientists’ framings of the role of ocean science at the science–policy interface can be quantified in surveys, that framing varies among scientists, and that research priorities vary according to the framings.     

水下物体磁探测线间距的影响因素

建立合理水下小目标磁探测线间距需以定量分析各种因素对其影响为基础。将水下小目标的磁场模型视为磁偶极子,建立水下小目标的磁场空间衰减规律。根据水下目标磁探测的原理及其工作背景,对目标磁距大小、仪器信噪比、地磁变化、日变影响、测船的定位误差等因素进行综合分析,得出磁力仪在探测某一已知物时的测线间距计算公式。     

A Dipole Pattern of Summer Precipitation over Mid-high Latitude Asia and Related Snow Cover Anomalies in the Preceding Spring

A dipole pattern of summer precipitation over the mid-high latitudes of Asia, which is characterized by opposing summer precipitation variations between the Mongolian and Northeast China （MNC） region and the West Siberian Plain （WSP）, is found to be clear and stable on both interdecadal and interannual scales during 1981- 2011. Spring snow cover anomalies over a small region within the WSP and the Heilongjiang River （HR） region are closely related to the variation of this dipole mode during the subsequent summer, and they can therefore be considered as forecasting factors. Our statistical results imply a potential process explaining the relationship between the spring snow anomalies and the summer rainfall dipole. Corresponding to the snow anomalies, Rossby waves propagate along a path from the WSP region, via the Mongolian Plateau, to the Stanovoy Range during summer. At the same time, Rossby-wave energy divergences and convergences along this path maintain and reinforce an anomalous cyclone and anticyclone pairing over the Asian continent, which is significantly linked to opposite summer precipitation anomalies between the MNC and WSP regions. Numerical experiments are need- ed to further confirm the above conjecture and demonstrate the detailed physical mechanisms linking the spring snow cover anomalies and summer precipitation dipole.     

Origin and anatomy of two different types of mass–transport complexes: A 3D seismic case study from the northern South China Sea margin

Integration of 2D and 3D seismic data from the Qiongdongnan Basin along the northwestern South China Sea margin has enabled the seismic stratigraphy, seismic geomorphology and emplacement mechanisms of eight separate, previously undocumented, mass–transport complexes (MTCs) to be characterized. These eight MTCs can be grouped into two types:(1) Localized detached MTCs, which are confined to submarine canyons and cover hundreds of km², consist of a few tens of km³ remobilized sediments and show long striations at their base. They resulted from small-scale mass-wasting processes induced by regional tectonic events and gravitational instabilities on canyon margins.(2) Regional attached MTCs, which occur within semi-confined or unconfined settings and are distributed roughly perpendicular to the strike of the regional slope. Attached MTCs occupy hundreds to thousands of km² and are composed of tens to hundreds of km³ of remobilized sediments. They contain headwall escarpments, translated blocks, remnant blocks, pressure ridges, and basal striations and cat-claw grooves. They were created by large-scale mass-wasting processes triggered by high sedimentation rates, slope oversteepening by shelf-edge deltas, and seismicity.Our results show that MTCs may act as both lateral and top seals for underlying hydrocarbon reservoirs and could create MTC-related stratigraphic traps that represent potential drilling targets on continental margins, helping to identify MTC-related hydrocarbon traps.     

The evolution of rifting on the volcanic margin of the Pelotas Basin and the contextualization of the Paraná–Etendeka LIP in the separation of Gondwana in the South Atlantic

The Pelotas Basin is the classical example of a volcanic passive margin displaying large wedges of seaward-dipping reflectors (SDR). The SDR fill entirely its rifts throughout the basin, characterizing the abundant syn-rift magmatism (133–113 Ma). The Paraná–Etendeka Large Igneous Province (LIP), adjacent to west, constituted the pre-rift magmatism (134–132 Ma). The interpretation of ultra-deep seismic lines showed a very different geology from the adjacent Santos, Campos and Espírito Santo Basins, which constitute examples of magma-poor passive margins. Besides displaying rifts totally filled by volcanic rocks, diverse continental crustal domains were defined in the Pelotas Basin, such as an outer domain, probably constituted by highly stretched and permeated continental igneous crust, and a highly reflective lower crust probably reflecting underplating.The analysis of rifting in this portion of the South Atlantic is based on seismic interpretation and on the distribution of regional linear magnetic anomalies. The lateral accretion of SDR to the east towards the future site of the breakup and the temporal relationship between their rift and sag geometries allows the reconstitution of the evolution of rifting in the basin. Breakup propagated from south to north in three stages (130–127.5; 127.5–125; 125–113 Ma) physically separated by oceanic fracture zones (FZ). The width of the stretched, thinned and heavily intruded continental crust also showed a three-stage increase in the same direction and at the same FZ. Consequently, the Continental-Oceanic Boundary (COB) shows three marked shifts, from west to east, from south to north, resulting into rift to margin segmentation. Rifting also propagated from west to east, in the direction of the final breakup, in each of the three segments defined. The importance of the Paraná–Etendeka LIP upon the overall history of rupturing and breakup of Western Gondwanaland seems to have been restricted in time and in space only to the Pelotas Basin.     

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation

This paper describes studies of the effect of hydrate dissociation on the safety and stability of methane hydrate-bearing sediments. Methane hydrates within the sediments were dissociating under the conditions of a confining pressure of 0.5 MPa, 1 MPa, 2 MPa and a temperature of −5 °C. After 6 h, 24 h, or 48 h, a series of triaxial compression tests on methane hydrate-bearing sediments were performed. The tests of ice-clay and sediments without hydrate dissociation were performed for comparison. Focusing on the mechanical properties of the sediments, the experimental results indicated that the shear strength of the ice-clay mixtures was lower than that of the methane hydrate-bearing sediments. The strength of the sediments was reduced by hydrate dissociation, and the strength tended to decrease further at the lower confining pressures. The secant modulus E_S of the sediments dropped by 42.6% in the case of the dissociation time of the hydrate of 48 h at the confining pressure of 1 MPa; however, the decline of the initial yield modulus E₀ was only 9.34%. The slower hydrate dissociation rate contributed to reducing the failure strength at a declining pace. Based on the Mohr–Coulomb strength theory, it was concluded that the decrease in strength was mainly affected by the cohesive reduction. Moreover, the mathematical expression of the M–C criterion related to the hydrate dissociation time was proposed. This research could be valuable for the safety and stability of hydrate deposits in a permafrost region.     

The role of the capture fisheries and aquaculture sectors in the Korean national economy: An input–output analysis

The aquaculture industry can meet food security needs and reduce the pressure on marine resources. The expansion of aquaculture allows the fisheries industry to restructure from hunting to farming, and thus drives the need for an analysis of the economic impacts of aquaculture industry in consideration of the interdependence between capture fisheries and aquaculture industry. This study attempts to analyze the economic impacts of two fishery sectors using input–output (I–O) analysis, with specific application to Korea. To this end, this study applies the I–O models to the Korean I–O tables generated by the Bank of Korea, paying particular attention to the two fishery sectors in Korea, considering them as exogenous, and then determining their impacts. Specifically, the production-inducing effects, employment-inducing effects, supply shortage effects, sectoral price effects, forward linkage effects, and backward linkage effects of the two fishery sectors are presented over the period 1995–2010. For example, the production-inducing effect of a KRW 1.0 change in fisheries investment is larger in the petroleum and chemical sectors than in other sectors. Moreover, the aquaculture sector has larger employment-inducing effects than the capture fisheries. Finally, the potential uses of the results of this analysis are presented from the perspective of policy instruments, and policy implications are discussed.