经验模式分解的尺度阈值滤波在变形分析中的应用

本文将信号处理领域的经验模式分解算法应用于变形信息的提取中,通过引入阈值函数,建立了基于经验模式分解的尺度阈值滤波模型,采用优化模型确定了经验模式分解的次数。分别通过模拟试验和实测数据与小波阈值法和多项式拟合法进行了比对,分析表明:在低噪声情况下,三种方法都有一定的滤波效果;在高噪声情况下,经验模式分解的尺度阈值滤波法具有与小波阈值去噪法相等的精度,而且瞬时强噪声识别能力更好,优于多项式拟合法。     

The Glarus thrust: excursion guide and report of a field trip of the Swiss Tectonic Studies Group (Swiss Geological Society, 14.–16. 09. 2006)

This excursion guide results form a field trip to the Glarus nappe complex organized by the Swiss Tectonic Studies Group in 2006. The aim of the excursion was to discuss old and recent concepts related to the evolution of the Glarus thrust. The major aspects were (i) the interplay between deformation, fluid flow and geochemical alteration, (ii) episodic versus continuous deformation and fluid flow, and (iii) the link between large-scale structures, microstructures, and geochemical aspects. Despite 150 years of research in the Glarus nappe complex and the new results discussed during the excursion, there exist controversies that still are unsolved.     

俯冲带榴辉岩的变形作用及其对俯冲-折返过程的意义

榴辉岩是大洋和大陆俯冲带的重要岩石类型,在研究俯冲带的形成过程、热结构、壳幔相互作用等方面有重要意义。通过对天然和实验样品中石榴子石、绿辉石等矿物的变形特征、变形机制、变形的影响因素等的综合分析,系统总结了高压变质带中榴辉岩矿物显微和超微变形研究的进展,探讨了榴辉岩的变形特征在恢复俯冲与折返过程研究中的意义及一些尚待解决的一些问题。     

利用DInSAR和GPS综合方法估计地表3维形变速率

在分析基于贝叶斯统计和马尔科夫随机场理论的解析优化法的基础上,提出以GPS提供的高精度的水平形变速率作为约束,利用直接分解法,将DInSAR的斜距向形变速率分解成垂直形变速率。试验结果表明,直接分解法有效地综合了GPS的高水平精度与DInSAR的高垂直精度优点,且计算简单,克服了解析优化法可能出现的数值不稳定问题。     

基于GPS技术监测高层建筑物变形的研究

以武汉大学信息学部教学实验大楼为实验对象,分析了大楼在N、E、U方向上的每h变化、d变化及变形规律,阐明GPS技术在高层建筑变形监测中的应用。     

浙闽山区茶叶生产基地评价的探讨

茶叶基地的评价包括对基地的自然和经济条件的评估,应用系统分析方法,将自然和经济条件进行定量的综合评估,用综合评价值区分基地间的差异,最后定性与定量相结合,提出茶叶生产基地的合理布局.     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...     

1786年康定地震形变特征的初步研究

本文对鲜水河断裂带南东段,康定断裂地震的形变带进行了分析。认为,地震形变带主要由发育于地形斜坡上的线性坡中槽或垄岗组成。形变带具分段特点,单条长850—1500米,呈右阶“斜列式”展布,中段(极震区)一带为现状型。其中的破裂面具正断兼扭动特点。空间特征上,坡中槽一侧的交替上升变化是依次、轮换出现的,它是地震断层运动屈曲作用(Fault buckling)导致地表变形的反映。这种形变现象与该带北西段(炉霍段)走滑型地震的形变带相比有明显的差异,也表明鲜水河断裂带北西、南东两段的地震破裂方式是不尽相同的,它为同一走滑带不同地段运动特征的差异提供了证据。     

Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.