基于GIS的坡面泥石流危险性评价

综合不同的泥石流评价因子对泥石流危险性进行了研究,利用地理信息系统（ GIS）来计算潜在的泥石流危险区域。选取虹口乡高原村与庙坝村共处坡面为研究区域,在ArcGIS中生成研究区域的坡面立体图。选取适当的评级指标,确定了流域内主要的泥石流影响因子。采用层次分析法得出各主要因子的权重值,将各因子划分为五个不同等级,并分别对各个因子进行数值化和归一化处理。利用ArcGIS形成各评价因子专题层,再分别给不同评价栅格赋权重值,最终运用叠置分析与插值分析得出研究坡面的不同色带所表示的危险等级区划图,从而实现单坡面泥石流危险性的评价。     

浅谈北京规划市区1:500地形图数字化测绘

地形图为国民经济建设和社会各行各业的发展提供测绘保障,它是城市规划设计、市政工程建设、工业与民用建筑、土地开发利用、防灾减灾等各方面的基础数据之一。本文结合北京城市基础测绘工作,以《BSCS G2000》测图软件为例,简述大比例尺数字化地形图的作业流程,地形要素取舍及检查验收工作。     

Mapping spatio-temporal flood inundation dynamics at large river basin scale using time-series flow data and MODIS imagery

Flood inundation is crucial to the survival and prosperity of flora and fauna communities in floodplain and wetland ecosystems. This study tried to map flood inundation characteristics in the Murray-Darling Basin, Australia, utilizing hydrological and remotely sensed data. It integrated river flow time series and Moderate Resolution Imaging Spectroradiometer (MODIS) images to map inundation dynamics over the study area on both temporal and spatial dimensions. Flow data were analyzed to derive flow peaks and Annual Exceedance Probabilities (AEPs) using the annual flood series method. The peaks were linked with MODIS images for inundation detection. Ten annual maximum inundation maps were generated for water years 2001–2010, which were then overlaid to derive an inundation frequency map. AEPs were also combined with the annual maximum inundation maps to derive an inundation probability map. The resultant maps revealed spatial and temporal patterns of flood inundation in the basin, which will benefit ecological and environmental studies when considering response of floodplain and wetland ecosystems to flood inundation.     

嫦娥一号IIM数据应用处理流程分析

对嫦娥一号干涉成像光谱仪（IIM）数据的特点进行了分析,并就存在的一些问题提出了解决方案,制定了IIM数据应用处理流程,为该数据的正确使用提供方法参考。研究结果表明,在空间域传感器左侧响应偏低,右侧响应偏高;在波谱域长波段响应存在较大偏差。经过绝对定标和辐射畸变校正后的反射率与地基望远镜光谱匹配良好,可以用于应用研究。利用校正后的数据对Aristarchus地区岩石类型开展初步研究的结果表明,该地区在纵向和横向上都存在岩性的多样性。校正后的图像不仅提高了分类精度,还被识别出撞击坑可能存在的滑坡。嫦娥一号IIM能够在全球、区域和局部尺度上以较高的空间分辨率和光谱分辨率获取月表元素和矿物成分信息,有助于深化对月球形成和演化的认识。     

Regional hydrologic mapping of flows in stream networks

River low flow (LF) is an important hydrological characteristic used in management of the quantity and quality of water resources. A common way to transpose at-station low flow quantiles to ungaged locations involves development of regional multivariate regression models. In site selection studies of water control facilities, need arises to automate the mapping of LF characteristics onto the stream network in a continuous manner. This would allow estimation of LF at any desired ungaged location. A mapping algorithm is introduced that determines the value of regression model's independent variables (input components) over the drainage area of each stream pixel and calculates the flow (output). The mapping algorithm relies mainly on the digital elevation model (DEM) and its derivatives, such as flow direction and flow accumulation. Furthermore, the contribution of each independent variable of the regional model to the total flow may be plotted to represent the flow profiles along the streams. A case study involving LF mapping in rivers of Gilan province, Iran, where LF quantiles are required for issuing water withdrawal permits as well as maintaining water quality standards, is also described in the paper. Overall, the maps and profiles of flow statistics in the region of interest provide convenient visualization and assessment tools for water resource and environmental engineers. The transposition algorithm may also be applied in regional mapping of other flow characteristics such as flood or average flows.     

格网DEM上径流长度计算误差的定量分析

基于格网DEM的径流长度的计算误差主要来源于DEM数据和流径提取算法。通过数据独立的误差分析方法,定量分析流径提取算法模型产生的误差。首先选取5种数学曲面作为模拟DEM数据源,计算出径流长度,以由曲面公式推导的径流长度公式计算的径流长度作为理论真值,通过两者的对比,分析误差及其空间分布。结果表明,汇水区的径流长度计算精度明显高于分水区;分水区的径流长度含有一定的系统误差。     

城市3维模型构建方法研究与实现

3维模型的构建是城市3维地理信息系统建设的核心。介绍了基于现有数据资料制作城市3维模型的工艺流程,重点研究了利用城市大比例尺3维DLG数据批量获取建筑物高度的新方法和贴图制作过程。按照上述制作工艺和方法较好地解决了大面积城市3维建模这一问题,生成的模型具有很高的精度,完全满足城市3维建模的精度要求。     

浅谈测绘工程监理内容及方法

测绘监理与测绘行业质量监督不同,测绘监理注重生产的全过程,控制测绘生产过程中各个工序的质量,从而保障最终测绘成果的质量;测绘行业质量监督则是代表政府行使对测绘项目进行监督的行为。因此,两者在工作范围、工作性质以及工作深度等方面存在差别。但是两者同时又有统一的关系,也就是都为保障测绘成果质量,更好地服务保障经济社会发展采取的保障措施。现今在国内已有很多项目引入了监理机制,但尚没有形成一套完善有效的测绘监理行业规范。笔者根据多年在广东、海南、新疆等地区从事监理工作的实际经验,结合工程监理中的部分内容和方法,总结出了一套较为完善有效的测绘工程监理方案。     

树状河系主流的自动推理

分析了不同类型河系的空间特征,对非网状河系以180°假设和锐角假设为基础,改进了自动确定河段流向的定量化决策表,当出现流向冲突时,遵守少数服从多数的原则。参考河段的流向、节点处分支河段的累计河段数和累计长度,能自动推理出树状河系的主支流关系。在此基础上,进一步研究了树状河系的编码方法,并用实例验证了所提出的算法。     

RTK技术在沛县新城区图根控制测量中的应用

叙述了RTK技术在沛县新城区图根控制测量中的应用,通过比较分析说明：RTK的测量精度完全能够满足1：500地形测图图根控制的精度要求。