Bed waves at the basin scale: implications for river management and restoration

An extensive literature about fluvial sediment waves, slugs or pulses has emerged in the past 20 years. The concept has been useful in many respects, but has been applied to diverse phenomena using a variety of definitions. Moreover, inferred linkages between channel‐bed changes and sediment loads are often not justifiable. This paper reviews concepts of large fluvial sediment waves at scales extending to several tens of kilometres. It points out constraints on the inferences that can be made about sediment loads based on changes in channel‐bed elevation at this scale where channel sediment interacts with storage in floodplain and terrace deposits. The type area of G. K. Gilbert's initial sediment‐wave concept is re‐examined to show that neither wave translation nor dispersion occurred in the simple manner commonly assumed. Channel aggradation and return to graded conditions provide an alternative theory explaining Gilbert's observed bed‐elevation changes. Recognizing the evidence and implications of the former passage of a large‐scale bed wave is essential to the accurate diagnosis of catchment conditions and the adoption of appropriate river restoration goals or methods. Sediment loads, water quality, channel morphologic stability and aquatic ecosystems often reflect changes in sediment storage long after the channel bed has returned to grade. Copyright © 2006 John Wiley & Sons, Ltd.     

聚晶金刚石取心钻头的研究与应用

煤田勘探中存在大硬度、弱研磨性、高胶结强度地层的低钻效问题，为此进行了聚晶金刚石取心钻头的研制。该聚晶钻头底唇设计为阶梯状，水口不超过8个，聚晶在底唇上采用抛物线布局。聚品金刚石取心钻头经与PDC钻头、金刚石钻头对比，其在大部分地层磨损正常，钻效有较大提高。     

The problem of underpowered rivers

This study has hypothesized that for many rivers the trade-off between flow accumulation and the decrease in slope along channel length means that stream power increases downstream and, moreover, that given the low slope angles in headwater and low-order streams, they would have insufficient stream power to erode let alone transport sediment. The study considered the stream power profile, the particle travel distances and the application of the Hjulström curve based on the velocity profile of nine, large UK catchments. The study showed that:

1. Some rivers never showed a maximum in their longitudinal stream power profile, implying that some rivers never develop a deposition zone before they discharge at the tidal limit.
2. Particle travel distances during a bankfull discharge event showed that for some rivers 91% of the upper main channel would not be cleared of sediment. Furthermore, while some rivers could transport a 2 mm particle their entire length in one bankfull event, for another river it would take 89 such events.
3. The Hjulström curve shows that for three of the study rivers the upper 20 km of the river was not capable of eroding a 2 μm particle.
4. The study has shown that for all rivers studied, erosion is focused downstream and deposition upstream. Many UK rivers have a dead zone where, on time scales of the order of centuries, no erosion or transport occurs and erosion only occurs in the lower courses of the channel where discharge rather than slope dominates – we propose these as underpowered rivers.

© 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

钻井工程用超硬材料及钻头的发展

介绍了钻井工程用超硬复合材料（包括ＰＤＣ、ＰＣＢＮ、陶瓷和金刚石膜）的发展现状及前景;同时也介绍了以这些材料切削具的钻头制造及应用情况;指出金刚石膜合成技术的发展已使金刚石膜制造钻井工程用切削具成为可能。     

硬质合金钎头胎体表面渗硼强化实验研究

对钎头胎体表面渗硼方法和工艺进行了实验研究,给出了有关工艺参数与方法。它对提高硬质合金钎头胎体表面和耐磨性,延长钎头的使用寿命具有积极的意义。     

武汉白沙洲长江大桥百米长桩成孔技术与施工实践

介绍了百米长桩的施工方法、施工设备、护孔技术,并就深孔实施泵吸反循环的可行性、主要技术措施以及强风化岩层的糊钻问题进行了分析。     

金刚石钻头制造的新型模具材料及模具成型工艺

针对无压浸渍法制造金刚石钻头存在模具费用高、模具加工周期长等缺点,研究了一种新型模具材料（陶瓷粉）取代石墨材料,并研究了一种全新的模具成型方法,简化了模具制造工序,降低了成本。     

Pliocene aridity and Neogene landscape evolution recorded by a fluvial sediment system (Campaspe Formation) in northeast Queensland

Campaspe Formation, a surficial, fluviatile, sand-dominated unit, is extensively developed in the Charters Towers region of north Queensland where it covers an area of 11 000 km², overlying Paleozoic basement and erosional remnants of Paleogene Southern Cross Formation. In the northern part of its distribution, it is interlayered with, and overlain by, flows of Nulla Basalt. It is dated as mid-Pliocene, based on the 3.48 Ma age of the Myrrilumbing Flow interlayered with its upper part, an antiquity consistent with thin ferricrete locally developed at its surface. The formation defines the Campaspe Surface at an elevation of 200–440 m in the present landscape, falling gently from upland to the west towards the current channel of the Burdekin River. This surface is a relict alluvial plain little incised by easterly flowing tributaries of the Burdekin River and has survived, essentially intact, from the early Pliocene. Geometry of the formation is established from some 2000 mineral exploration drill holes and seismic profiling. It has an average thickness of some 60 m, reaching a maximum of over 200 m. It blankets a pre-existing, low relief landscape in which a basement ridge divides it into two sub-basins that mirror the present drainage. The formation consists of poorly sorted sandstone with minor conglomerate and siltstone, and contains paleosol horizons with associated calcrete. Matrix supported sandstone in the succession, indicates deposition in part from hyperconcentrated flows. Sandstones generally show poorly defined planar layering as typical of ephemeral overbank and terminal splay sediment bodies but beds with cross-lamination, indicating fluvial channel bed forms, are also present. They are characterised by pore-filling silt and mud, largely emplaced by post-depositional infiltration, such that the unit produces essentially no groundwater. Facies attributes are consistent with fluvial deposition in ephemeral, dry climate, distributary system, with inefficient cross-drainage discharge that induced aggradation, resulting in a substantial sediment body perched in the landscape. Framework grain compositions show the formation to be mineralogically mature, representing erosional debris derived from intense weathering in an earlier climatic regime recorded, at least in part, by duricrust developed in the fluviatile–lacustrine Southern Cross Formation of Paleogene age. Such duricrust intervals are now upstanding in the landscape, representing erosional remnants from inverted relief developed in a mid-Cenozoic, pluvial, landscape cycle. Paleoclimatic signature of the Campaspe Formation extends the record of Pliocene aridity, widely recognised elsewhere in Australia, to northeast Queensland. In large part the landscape of the Charters Towers district is relict from the early Pliocene and is in the process of readjusting to more pluvial climatic regimes. By implication, Pliocene aridity has, on a small scale, exerted a strong influence on the present physiography of Australian landscapes.     

Luminescence chronology of late Holocene extreme hydrological events in the upper Penner River basin,South India

Field stratigraphy, sedimentology and optically stimulated luminescence (OSL) dating have been used to reconstruct the southwest monsoon variability in the semi‐arid region of southern India during the late Holocene. Facies architecture and OSL dating of the water‐lain sediment suggest prevalence of a weak hydrological regime around 3 ka. Following this, a progressive strengthening of monsoon occurred till 2 ka. After 2 ka and until 1 ka fluvial activity was nearly dormant, indicating weakening of the monsoon. Presence of high‐magnitude flood deposits, overbank sedimentation and pedogenesis during 1–0.6 ka indicate intensification of the southwest monsoon in the basin. The onset of aridity was associated with episodic storm surge events that are manifested in the pond sedimentation and localised aeolian accretion. This phase is bracketed between 0.5 ka and 0.2 ka. A renewed phase of monsoonal activity was observed in the form of floodplain aggradation between 180 and 90 years ago. In the past 70 years no significant change in the monsoon performance has been observed. Copyright © 2007 John Wiley & Sons, Ltd.     

Application of linear and nonlinear techniques in river flow forecasting in the Kilombero River basin,Tanzania / Application de techniques linéaires et non-linéaires à la prévision des débits dans le bassin de la Rivière Kilombero,en Tanzanie

Abstract

Modelling of the rainfall–runoff transformation process and routing of river flows in the Kilombero River basin and its five sub-catchments within the Rufiji River basin in Tanzania was undertaken using three system (black-box) models—a simple linear model, a linear perturbation model and a linear varying gain factor model—in their linear transfer function forms. A lumped conceptual model—the soil moisture accounting and routing model—was also applied to the sub-catchments and the basin. The HEC-HMS model, which is a distributed model, was applied only to the entire Kilombero River basin. River discharge, rainfall and potential evaporation data were used as inputs to the appropriate models and it was observed that sometimes the system models performed better than complex hydrological models, especially in large catchments, illustrating the usefulness of using simple black-box models in datascarce situations.