打滑地层新型孕镶金刚石钻头

在分析打滑地层特点的基础上,指出了钻进该地层所存在的问题,提出了用于打滑地层钻进的新型孕镶金刚石钻头的设计思路,在钻头工作层中采用主、辅两种磨料,并对这两种磨料的工作机理、处理工艺以及该新型钻头的制造进行了阐述.钻头的室内钻进试验结果表明:在钻进极坚硬致密的锆刚玉时,相对于普通金刚石钻头,新型孕镶金刚石钻头的钻进时效提高1.93倍,平均磨损量增加38%,具有高时效、相对寿命长的优点,是打滑地层钻进的理想钻头.     

Simulating meander evolution of the Geul River (the Netherlands) using a topographic steering model

Active meandering rivers are capable of reworking and removing large quantities of valuable land. Therefore, understanding the characteristics of meandering rivers and predicting future meander behaviour can be of great value for local authorities. In this study, we apply a topographic steering meander model to the Geul River (southern Netherlands), using field data to calibrate the model. The present channel characteristics of the Geul River were mapped in the field. Cut‐banks were classified as erosive, unstable or stable. The model outcomes were compared with these field data. Several model runs were carried out, using different sets of parameter values. After studying the results and using the field data, we introduced the concept of a variable channel width in the simulation model. In reality, the river has different channel widths varying from 8 to more than 15 m. These widths are a linear function of local curvature. The model runs using a variable channel width show that the model is capable of predicting locations of lateral migration in conformity with observed active lateral migration and erosive banks. With both models, the sediment reworking time of the floodplain can be calculated. Floodplain reworking times of 200–300 years were calculated. In combination with the lateral migration rate, this reworking time is an important element in catchment sediment budget calculations. Copyright © 2007 John Wiley & Sons, Ltd.     

山区河流准三维水沙输运与河床演变模拟

在渠道水力学和河流动力学研究的基础上，对不规则河流形态下的纵向流速分布和弯道水流进行了讨论，并分析了任意断面和垂线位置的流场计算公式。在综合各种泥沙动力学研究成果基础之上，探讨了在天然河流中的悬移质输沙能力与沉积条件，分析了河床质起动的控制性因素及推移质输沙方程。提出了受冲淤影响的河床质粒径组成和动态递推公式。结合这些流场与泥沙计算方法及河床形态调整技术，作者提出一个准三维河流动力学模型。该模型只需要河流几何形状、人流条件以及泥沙级配参数，能够模拟出不规则几何形态的河道断面流速分布及平面流场分布，并且对于弯道水流特征与泥沙输送一沉积特征也能得到较好的表现。该模型是对有关河流演变理论和实验成果的综合应用，为研究山区高含沙水流下的河床变形以及洪水演进提供了强有力的工具。     

孵漂石地层大口径钻头与钻进工艺的选择

根据工程实例，通过钻头和钻进工艺的对比试验，得出了利用大直径滚刀钻头，在致密卵漂石地层施工中大口径桩孔，能大幅度提高钻进效率。     

滚刀钻头在桩基施工中的应用

焊齿破岩滚刀钻头适应多种地层钻进。本文主要介绍了焊齿破岩滚刀钻头的钻进工作原理，在桩基施工中的钻进技术参数，滚刀刀齿的修复及应用效果。     

河流沉积对于气候和海平面变化响应的讨论

河流沉积地层是古代陆相沉积和大陆边缘沉积的重要组成部分。河流沉积与气候和海平面升降之间的关系虽然研究较多，但是众多的研究集中于河流沉积与相对海平面之间的变化，而研究河流沉积与气候的关系则集中于对近100Ma年以来的河流沉积，而对古代河沉积与气候之间的变化关系研究较少。本文拟对河流沉积与海平面变化和气候变化的响应进行一些讨论。     

An experimental study on the ripple–dune transition

Flume experiments were conducted on different bed stages across the ripple–dune transition. As flow velocity increases, an initially flat bed surface (made of fairly uniform sandy material) is gradually transformed into a two‐dimensional rippled bed. With further increase in velocity, two‐dimensional ripples are replaced by irregular, linguoid ripples. As the average velocity necessary for the ripple–dune transition to occur is imposed on the bed surface, these non‐equilibrium linguoid ripples are further transformed into larger, two‐dimensional dunes. For each of these stages across the transition, a concrete mould of the bed was created and the flow structure above each fixed bed surface investigated. An acoustic Doppler velocimeter was used to study the flow characteristics above each bed surface. Detailed profiles were used along a transect located in the middle of the channel. Results are presented in the form of spatially averaged profiles of various flow characteristics and of contour maps of flow fields (section view). They clearly illustrate some important distinctions in the flow structure above the different bedform types associated with different stages during the transition. Turbulence intensity and Reynolds stresses gradually increase throughout the transition. Two‐dimensional ripples present a fairly uniform spatial distribution of turbulent flow characteristics above the bed. Linguoid ripples induce three‐dimensional turbulence structure at greater heights above the bed surface and turbulence intensity tends to increase steadily with height above bed surface in the wake region. A very significant increase in turbulence intensity and momentum exchange occurs during the transition from linguoid ripples to dunes. The turbulent flow field properties above dunes are highly dependent on the position along and above the bed surface and these fields present a very high degree of spatial variability (when compared with the rippled beds). Further investigations under natural conditions emphasizing sediment transport mechanisms and rates during the transition should represent the next step of analysis, together with an emphasis on quadrant analysis. Copyright © 2001 John Wiley & Sons, Ltd.     

Cryptic sequence boundaries in braided fluvial successions

In braided fluvial deposits, consisting of monotonous successions of sandstone or conglomerate, it may be difficult to distinguish regionally significant bounding surfaces (sequence boundaries) from autogenic channel-scour surfaces. Major surfaces may be characterized by erosional relief and draped by lag deposits, but not all sequence boundaries show these characteristics. Other clues to the presence of a major surface are sharp changes in detrital composition, shifts in regional palaeocurrent trends and evidence of early diagenesis of the sandstones immediately below the sequence boundary. Examples of these attributes of cryptic sequence boundaries are illustrated from three Mesozoic units in the Colorado Plateau area of the United States. In the Chinle Formation (Triassic), near Moab, Utah, angular intraformational unconformities overlie sandstones showing evidence of early diagenesis. In the Castlegate Sandstone (Upper Cretaceous) of east-central Utah, a cryptic sequence boundary can be discriminated from other erosion surfaces by the evidence of detrital petrography and early diagenesis. Palaeocurrent data indicate changes in regional palaeoslope at two sequence boundaries within this unit. Evidence of early diagenesis is also present at a sequence boundary in the Kayenta Formation (Jurassic) of westernmost Colorado.     

钻头预合金胎体粉末制备与应用

讨论了预合台体粉末的优点，研究了预合金胎的粉末的制备技术，列举了预合金胎体金刚石钻头的应用效果。     

Trees as riparian engineers: the Tagliamento river,Italy

Pristine river corridors were characterized by island and floodplain development driven by the inter‐play of flows, sediments and woody vegetation. Here we explore these relationships within topographically controlled settings within the upper, middle and lower reaches of a large, semi‐natural alpine to mediterranean river. These reaches have expanding or contracting valley floors within which we show that there are more or less predictable patterns of stream power and rates of vegetation growth, reflecting water availability during dry periods and also the availability of sand and finer sediment. We relate these to the pattern of island distribution that is repeated within the three reaches and is indicative of the engineering role of riparian trees. Islands are shown to develop within thresholds defined by stream power, rates of woody vegetation growth and rates of sedimentation, and to develop most quickly where riparian species include those capable of sprouting from driftwood. Copyright © 2006 John Wiley & Sons, Ltd.