T—R旋回层序在东淮凹陷前梨园地区Es3^3亚段储层研究中的应用

依据对东濮凹陷前梨园地区测井、岩芯和高分辨率地震资料的综合研究，可将Es3^3亚段划分为三个湖进-湖退（T-R）旋回沉积层序，自底往上，Es3^3I层序发育辫状三角洲-半深湖沉积体系，Es3^3ⅡEs3^3Ⅲ层序则以扇 三角洲-半深湖、深湖-湖底扇沉积体系为主，由沉积层序的区域对比和沉积体系的空间展布，建立起了前梨园地区Es3^3亚段高分辨率等时地层格架，将储集岩层置于等时界面限定的沉积层序中进行划分和对比，可精确地解释砂体的成因及其横向变化规律。     

含粘粒砂土抗液化性能的试验研究

通过对含粘粒砂土所作的试验研究, 包括: 粘粒矿物成分不同、粘粒含量不同的重塑土样所作的室内动三轴试验; X光衍射试验, 试验结果对比分析后, 得出了含粘粒砂土抗液化性能的特性。并得出以下结论: (1)粘粒矿物成分不同, 也引起砂土动力稳定性的变化; (2 )动剪应力强度与粘粒含量并非呈单调增加关系, 而呈抛物线型, 并给出回归方程; (3)含粘粒的砂土, 其抗液化能力最低点总是在粘粒含量 8.5～ 9.5 %之间。     

Cyclic strength and deformation of crushable carbonate sand

Cyclic triaxial tests have been carried out on a skeletal carbonate sand from the west coast of Eire. Results are presented for undrained cyclic shear tests on samples with 80% of relative density consolidated under both isotropic and anisotropic conditions. Failure was defined as a 5% double amplitude cyclic strain and a 5% peak axial strain for stress-reversal and non-reversal stress conditions, respectively. Using this definition the cyclic strength for isotropically consolidated samples was affected by the confining pressure although the angular platey nature of the sand resulted in higher cyclic strengths than for a comparable silica sand. For anisotropically consolidated samples the cyclic strength increased with increasing initial static shear stress while on the other hand the cyclic strength normalised in the usual way with respect to the initial confining pressure decreased as this pressure increased.     

淹没不整合型碳酸盐三级旋回层序——兼论碳酸盐台地的“凝缩作用”

与层序地层学定义的类型Ⅰ层序（ＬＳＴ＋ＴＳＴ＋ＣＳ＋ＨＳＴ）及类型Ⅱ层序（ＳＭＴ＋ＴＳＴ＋ＣＳ＋ＨＳＴ）不同，淹没不整合型碳酸盐三级旋回层序以凝缩段直接覆盖在层序界面之上形成的，“ＣＳ＋ＨＳＴ”序列为特征，而且其底界面为一淹没不整合面或加深饥饿间断面。该类型三级旋回层序是碳酸盐台地淹没事件产生的凝缩作用过程的产物，它以总体向上变浅的非对称相序为特征。华北北部晚寒武世地层中发育的四个淹没不整合型三级旋回层序的相序特征表明，台地淹没事件及其相关的凝缩作用，只要沉积背景适合，并非三级旋回层序所独有，高频率海平面变化也常产生“瞬时淹没”，因而凝缩段并非都发育在最大海侵期，并且凝缩段也存在级别归属问题。     

华北地台北缘奥陶系亮甲山组的碳酸盐复合海平面变化旋回层序

华北地台北缘亮甲山组地层中发育有六种碳酸盐米级旋四层序；ａ型和ｂ型属潮下型，其下部单元为钙质泥岩（ａ型）及薄层泥晶灰岩（ｂ型）．上部单元为颗粒泥晶灰岩（ａ与ｂ相同）；ｃ－ｆ型属环潮坪型，它们的上部单元均为薄层泥晶白云岩及泥质白云岩，其下部岩石单元：ｃ型为厚层及块状颗粒泥晶灰岩，ｄ型为局部白云石化颗粒泥晶灰岩，ｅ型为白云岩化颗粒泥晶灰岩，ｆ型为中厚层含少量颗粒的泥晶结晶白云岩。从ａ型到ｆ型正好构成一个米级旋回层序的环境变化谱系。根据米级旋回层序的有序垂直叠加形式，可以建立亮甲山组地层构成的复合海平面变化旋四层序：１个三级旋四层序包含３个四级旋四层序，１３－１５个五级旋四层序，６０余个左右的米级旋四层序．通过这项研究表明，在浅水地层中进行露头旋四层序研究时，米级旋回层序是基本工作单元，其有序垂直叠加形式是识别长周期旋四层序的关键．     

碳糊电极循环伏安法测定γ－和β－二氧化锰物相

利用碳糊电极循环伏安法对γ－ＭｎＯ＿２和β－ＭｎＯ＿２进行了定量分析，相对于２００．０ｍｇ碳粉的线性范围分别为γ－ＭｎＯ＿２９．１３～４５，６ｍｇ；β－ＭｎＯ＿２４．５６～３６．５ｍｇ，在线性范围内测量７次，其ＲＳＤ分别为０．５９％～５．２８％和Ｏ％～５．７２％。同时对γ－ＭｎＯ＿２和β－ＭｎＯ＿２的混合试样及湘潭电解二氧化锰也进行了定量测定，其平均相对误差分别为２．０１％～１２．４％和１．９６％～７．５２％。该方法进行物相分析，具有简便、快速、灵敏、经济和不经化学分离等特点。     

碳酸盐岩米级旋回层序的成因类型及形成机制

在前人研究及自己野外观察的基础上,本文把碳酸盐岩米级旋回层序归为四大类:深水非对称米级旋回层序、L-M米级旋回层序、潮下碳酸盐米级旋回层序、潮坪碳酸盐米级旋回层序。米级旋回层序的形成机制是与米兰柯维奇旋回有关的高频率海平面振荡变化旋回所形成的间断-加积旋回沉积作用,它们的识别标志主要是岩石类型、界面特征、产出环境等。碳酸盐岩米级旋回层序的规则的垂直叠加形式是识别三级旋回层序的基础。     

The Non-Linear Stability of L4 in the Restricted Three-Body Problem when the Bigger Primary is a Triaxial Rigid Body

The non-linear stability of L ₄ in the restricted three-body problem has been studied when the bigger primary is a triaxial rigid body with its equatorial plane coincident with the plane of motion. It is found that L ₄ is stable in the range of linear stability except for three mass ratios:

天津蓟县雾迷山组高频旋回沉积特征

天津蓟县剖面的中元古界雾迷山组是一套厚达3 300 m的碳酸盐岩地层,其中广泛发育具有近似对称相序组构的雾迷山旋回层,属于特殊的环潮坪型碳酸盐米级旋回层序。在对旋回层内部岩石成因单元的类型及组合分析的基础上,建立了雾迷山旋回层的基本模式和沉积环境模式,并对成因单元的岩石磁化率特征及其对高频旋回的反映进行了探索。认为雾迷山旋回层为沉积环境的水深由较浅—较深—较浅—暴露条件下的沉积,可能代表真正的沉积旋回;其成因单元之间具有明显的有序叠置形态,表明它有可能是与米兰柯维奇旋回具有成因关联的高频率海平面变化所控制的自旋回沉积作用的产物。     

Effect of fluid pressure on rock compressive failure in a nearly impermeable crystalline rock: Implication on mechanism of borehole breakouts

We conducted laboratory true triaxial experiments in the nearly impermeable Pohang rhyolite to investigate failure mechanisms under ‘dry’ and ‘wet’ rock conditions. Under ‘dry’ conditions prismatic specimens were jacketed all around to prevent confining fluid penetration. Under ‘wet’ conditions one pair of the specimen faces was left unjacketed and in direct contact with the confining fluid (kerosene) applying the least principal stress in an attempt to simulate the case of an unlined borehole wall. In both testing setups the true triaxial compressive strength for a given least principal stress increases significantly as the intermediate principal stress rises. The unjacketed rhyolite strength is, however, only 60 to 85% of the strength under dry conditions, depending on the magnitude of the intermediate principal stress. In dry rhyolite the failure process begins upon dilatancy onset, followed by microcrack localization, and ending in a steeply dipping shear fracture. On the other hand, brittle fracture in wet specimens occurs almost immediately after the onset of dilatancy by the development of one or more through-going extensile fractures subparallel and adjacent to one of the unjacketed faces, resembling the extensile cracks leading to borehole breakouts in crystalline rocks. We infer that upon dilatancy the confining fluid intrudes and quickly propagates newly opened stress-induced microcracks subparallel to the unjacketed faces, leading to ‘early’ failure.