Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

华北燕山裂陷槽中元古代的深水沉积

对燕山沉降带中元古代的沉积相，有关学者大多定位于以滨海－浅海相为主体。根据在冀北地区的研究，于中元古代团山子组、高于庄组、杨庄组、雾迷山组、洪水庄组和铁岭组中发现大量深水沉积，主要有硅质页岩、含锰页岩、深水浊积岩及各种碳酸盐岩溶解相的系列沉积等。这对于深入研究燕山裂陷槽发展演化具有重要意义。     

停止开采深层地下水 修复与改善生态环境

沧州市水资源短缺，深层地下水严重超采，已形成大面积区域地下水位降落漏斗，地面沉降已达2m，生态环境严重恶化．为保障经济社会的可持续发展，要积极引调地表水，开发利用地下咸水，加强雨洪控制利用，逐步替代最后终止深层地下水的开采。从根本上修复和改善生态环境。     

房地产市场的发展对测绘学科教学的要求

分析了房地产市场发展的状况，提出了对测绘学科教学的要求，对测绘人才的需求，并对高校培养房产测绘人才综合能力提出了具体建议。     

空间数据质量相关问题探讨

阐述研究空间数据质量问题的必要性和重要性,进而依据GIS数据流程系统分析了产生数据质量问题的各种因素;并重点介绍了空间数据质量问题中基本的误差和不确定性分析方法以及常用的误差控制与校正方法。     

利用NOAA AVHRR数据研究北半球雪盖气候学特征

利用NOAA卫星图像,研究了北半球、欧亚、北美和青藏高原雪盖气候学特征及其变化趋势.指出北半球、欧亚和北美雪盖气候变化趋势基本一致,年均雪盖面积在1987年前后明显下降; 而青藏高原雪盖面积在1984年后明显下降,说明青藏高原雪盖的年际变化与北半球及欧亚、北美不完全一致.     

GPS弦距与常规光电测距弦距的比较与分析

比较GPS弦距与常规光电测距弦距的差别，对分析GPS测量误差问题，解决GPS与地面数据联合平差中权的确定问题，以及检核GPS网的解算结果具有重要意义。本文利用一多期复测成果，对其中的一些问题作了初步探讨。