Impact of soil and water conservation measures on catchment hydrological response—a case in north Ethiopia

Impact studies of catchment management in the developing world rarely include detailed hydrological components. Here, changes in the hydrological response of a 200‐ha catchment in north Ethiopia are investigated. The management included various soil and water conservation measures such as the construction of dry masonry stone bunds and check dams, the abandonment of post‐harvest grazing, and the establishment of woody vegetation. Measurements at the catchment outlet indicated a runoff depth of 5 mm or a runoff coefficient (RC) of 1·6% in the rainy season of 2006. Combined with runoff measurements at plot scale, this allowed calculating the runoff curve number (CN) for various land uses and land management techniques. The pre‐implementation runoff depth was then predicted using the CN values and a ponding adjustment factor, representing the abstraction of runoff induced by the 242 check dams in gullies. Using the 2006 rainfall depths, the runoff depth for the 2000 land management situation was predicted to be 26·5 mm (RC = 8%), in line with current RCs of nearby catchments. Monitoring of the ground water level indicated a rise after catchment management. The yearly rise in water table after the onset of the rains (ΔT) relative to the water surplus (WS) over the same period increased between 2002–2003 (ΔT/WS = 3·4) and 2006 (ΔT/WS >11·1). Emerging wells and irrigation are other indicators for improved water supply in the managed catchment. Cropped fields in the gullies indicate that farmers are less frightened for the destructive effects of flash floods. Due to increased soil water content, the crop growing period is prolonged. It can be concluded that this catchment management has resulted in a higher infiltration rate and a reduction of direct runoff volume by 81% which has had a positive influence on the catchment water balance. Copyright © 2010 John Wiley & Sons, Ltd.     

Curve‐Number/Green–Ampt mixed procedure for streamflow predictions in ungauged basins: Parameter sensitivity analysis

A procedure combining the Soil Conservation Service‐Curve Number (SCS‐CN) method and the Green–Ampt (GA) infiltration equation was recently developed to overcome some of the drawbacks of the classic SCS‐CN approach when estimating the volume of surface runoff at a sub‐daily time resolution. The rationale of this mixed procedure, named Curve Number for Green–Ampt (CN4GA), is to use the GA infiltration model to distribute the total volume of the net hyetograph (rainfall excess) provided by the SCS‐CN method over time. The initial abstraction and the total volume of rainfall given by the SCS‐CN method are used to identify the ponding time and to quantify the hydraulic conductivity parameter of the GA equation. In this paper, a sensitivity analysis of the mixed CN4GA parameters is presented with the aim to identify conditions where the mixed procedure can be effectively used within the Prediction in Ungauged Basin perspective. The effects exerted by changes in selected input parameters on the outputs are evaluated using rectangular and triangular synthetic hyetographs as well as 100 maximum annual storms selected from synthetic rainfall time series. When applied to extreme precipitation events, which are characterized by predominant peaks of rainfall, the CN4GA appears to be rather insensitive to the input hydraulic parameters of the soil, which is an interesting feature of the CN4GA approach and makes it an ideal candidate for the rainfall excess estimation at sub‐daily temporal resolution at ungauged sites. Copyright © 2013 John Wiley & Sons, Ltd.     

Mosaic desert pavement influences water infiltration and vegetation distribution on fluvial fan surfaces

Desert pavements (DPs) are critical for maintaining ecological stability and promoting near-surface hydrological cycling in arid regions. However, few studies have focused on eco-hydrological processes of DPs in the ecological systems of fluvial fans. Although DP surfaces appear to be barren and flat, we found that the surfaces are characterized by surface mosaic patterns of desert pavement (mosaic DP) and bare ground (mosaic BG). We investigated the effects of mosaic DP on water infiltration and vegetation distribution at six sites in fluvial fans (one on a hillside and five within the sectors of fans) along a southwest belt transect in northern Linze County, in the central Hexi Corridor (China). We found significant differences in mosaic DP between the hillside and sector sites in terms of pavement thickness and vesicular horizon thickness (Av thickness), particle composition, and bulk density, although significant differences were absent for mass soil water content, gravel coverage, and surface gravel size. The mosaic DP inhibited water infiltration by the pavement layer, where the sorptivity (S), initial infiltration rate (i_int), steady-state infiltration rate (i_sat) and infiltration time (T) averaged 1.19 cm/min^-0.5, 0.64 cm/min, 0.13 cm/min and 12.76 min, respectively. Where the pavement layer was scalped, the S, i_int, and i_sat increased by 0.27 cm/min^-0.5, 0.52 cm/min, and 0.40 cm/min, respectively, and the T reduced by 7.42 min. Water infiltration was mainly controlled by the pavement layer thickness (+), Av thickness (−), surface gravel coverage (−), fine earth (+) and fine gravel (−) in the pavement layer. The DP surfaces only had a sparse covering of shrubs, but an abundance of herbs. Few shrubs were present on the mosaic DP, but a greater number of shrubs and herbs grew on the mosaic BG. It can be concluded that DPs can maintain vegetation stability for different surface mosaic patterns. This study deepens our understanding of the eco-hydrological cycle of DP landscapes in arid regions.     

Spatial–temporal variability and hydrologic connectivity of runoff generation areas in a North Alabama pasture—implications for phosphorus transport

This study delineated spatially and temporally variable runoff generation areas in the Sand Mountain region pasture of North Alabama under natural rainfall conditions, and demonstrated that hydrologic connectivity is important for generating hillslope response when infiltration‐excess (IE) runoff mechanism dominates. Data from six rainfall events (13·7–32·3 mm) on an intensively instrumented pasture hillslope (0·12 ha) were analysed. Analysis of data from surface runoff sensors, tipping bucket rain gauge and HS‐flume demonstrated spatial and temporal variability in runoff generation areas. Results showed that the maximum runoff generation area, which contributed to runoff at the outlet of the hillslope, varied between 67 and 100%. Furthermore, because IE was the main runoff generation mechanism on the hillslope, the data showed that as the rainfall intensity changed during a rainfall event, the runoff generation areas expanded or contracted. During rainfall events with high‐intensity short‐ to medium‐duration, 4–8% of total rainfall was converted to runoff at the outlet. Rainfall events with medium‐ to low‐intensity, medium‐duration were found less likely to generate runoff at the outlet. In situ soil hydraulic conductivity (k) was measured across the hillslope, which confirmed its effect on hydrologic connectivity of runoff generation areas. Combined surface runoff sensor and k‐interpolated data clearly showed that during a rainfall event, lower k areas generate runoff first, and then, depending on rainfall intensity, runoff at the outlet is generated by hydrologically connected areas. It was concluded that in IE‐runoff‐dominated areas, rainfall intensity and k can explain hydrologic response. The study demonstrated that only connected areas of low k values generate surface runoff during high‐intensity rainfall events. Identification of these areas would serve as an important foundation for controlling nonpoint source pollutant transport, especially phosphorus. The best management practices can be developed and implemented to reduce transport of phosphorus from these hydrologically connected areas. Copyright © 2009 John Wiley & Sons, Ltd.     

Flood forecasting and infiltration modeling/Prévision de crue et modélisation de l’infiltration

Abstract

Abstract The role of accuracy in the representation of infiltration on the effectiveness of real-time flood forecasting models was investigated. A simple semi-distributed model of conceptual type with adaptive estimate of hydraulic characteristics included in the infiltration component was selected. Infiltration was described by a very accurate approach recently formulated for complex rainfall patterns, or alternatively through a simpler formulation known as an extension of the classical time compression approximation. The results indicated that, for situations involving a significant rainfall variability in space, the inaccuracy in the representation of infiltration cannot be corrected by the adaptive component of the rainfall–runoff model. A preliminary analysis of the role of an approximation of saturated hydraulic conductivity to be used in each homogeneous area of the semi-distributed model used both in non-adaptive version and in real-time is also presented.     

Daily variability of river concentrations and fluxes: indicators based on the segmentation of the rating curve

The variability of water chemistry on a daily scale is rarely addressed due to the lack of records. Appropriate tools, such as typologies and dimensionless indicators, which permit comparisons between stations and between river materials, are missing. Such tools are developed here for daily concentrations (C), specific fluxes or yields (Y) and specific river flow (q). The data set includes 128 long‐term daily records, for suspended particulate matter (SPM), total dissolved solids (TDS), dissolved and total nutrients, totalling 1236 years of records. These 86 river basins (10³–10⁶ km²) cover a wide range of environmental conditions in semi‐arid and temperate regions. The segmentation—truncation of C–q rating curves into two parts at median flows (q₅₀) generates two exponents (b_50inf and b_50sup) that are different for 66% of the analysed rating curves. After segmentation, the analysis of records results in the definition of nine major C–q types combining concentrating, diluting or stable patterns, showing inflexions, chevron and U shapes. SPM and TDS are preferentially distributed among a few types, while dissolved and total nutrients are more widely distributed. Four dimensionless indicators of daily variability combine median (C₅₀, Y₅₀), extreme (C₉₉, Y₉₉) and flow‐weighted (C*, Y*) concentrations and yields (e.g. C₉₉/C₅₀, Y*/Y₅₀). They vary over two to four orders of magnitude in the analysed records, discriminating stations and river material. A second set of four indicators of relative variability [e.g. (Y*/Y₅₀)/(q*/q₅₀)], takes into account the daily flow variability, as expressed by q*/q₅₀ and q₉₉/q₅₀, which also vary over multiple orders of magnitude. The truncated exponent b_50sup is used to describe fluxes at higher flows accounting for 75% (TDS) to 97% (SPM) of interannual fluxes. It ranges from ? 0·61 to + 1·86 in the database. It can be regarded as the key amplificator (positive b_50sup) or reductor (negative b_50sup) of concentrations or yields variability. C₅₀, Y₅₀, b_50sup can also be estimated in discrete surveys, which provides a new perspective for quantifying and mapping water quality variability at daily scale. Copyright © 2011 John Wiley & Sons, Ltd.     

小秦岭含金石英脉中包裹体的热爆曲线特征及其找矿意义

应用自制的高性能爆裂仪能探测到小秦岭地区脉型金矿微小包裹体的热爆温度,探测到金矿成矿热流体的存在及其活动强度;根据包裹体热爆曲线特征判别岩石的含金性及区分富金矿石和贫金矿石,为金矿找矿与评价提供重要依据。     

航空摄影最佳曝光量的选择

分解力是评定影象质量的重要指标。本文介绍利用改进后的国产9 w测微密度仪,测定航空软片静态分解力与曝光量的关系。以最大分解力所相应的曝光量作为确定航摄软片感光度的基准,以此为基础,确定航摄底片的最大密度(D_(max))、最小密度(D_(min))、影象反差(△D)和平均密度(D_R)本文对国产1022T、1022P、柯达2402、2412等航摄软片进行了研究,其试验结果可作为今后修改航摄规范的基础。     

砂岩风化晕厚度在广东晚更新世测年中的应用

广东地区河流阶地和冲积扇沉积物中砂岩砾石风化晕随时间增厚。风化晕生长速度呈指数衰减,并拟合于下列公式:T 1485D4.13这里T=时间,以年表示,D=沉积物表部约50块砾石风化晕厚度的加权平均值,以毫米表示。利用风化晕厚度确定出广东地区河流第一和第二级阶地分别为1000—13300年和8600—26500年,肇庆盆地北部山前地带第Ⅰ和第Ⅱ级冲积扇分别为51500年和24400年。同时,在构造地貌变形分析的基础上,估算出本区三条主要北东向断裂带在晚更新世—中全新世的垂直断层作用速度为0.6—1.6毫米/年,中全新世甚或晚更新世晚期以来的活动速度极小