无外加流体、350℃和差异应力条件下硫化物再活化实验研究

红透山块状硫化物矿石主要成分为黄铁矿、磁黄铁矿、黄铜矿、闪锌矿和石英、角闪石、黑云母等脉石矿物。将此矿石烘干后作为试料置于岩石三轴应力试验机,在13h内将轴压、围压和温度分步升至1276MPa、414MPa和350℃,然后在空气中自然冷却至室温。实验产物中黄铁矿、石英、长石等以脆性碎裂为主,而磁黄铁矿、黄铜矿、闪锌矿和云母等以塑性变形为主。再活化的黄铜矿、磁黄铁矿和少量闪锌矿呈脉和网脉穿插黄铁矿碎斑。实验结果表明,即使没有外来流体加入．构造动力作用所导致的流体包裹体破坏所释出的流体,就足以使成矿物质发生活化转移和再活化。     

GPS变形监测平差计算及不确定度分析

全球定位系统（GPS）是一种全天候、高精度的连续定位系统,它以速度快、方法灵活多样、操作简便等优势被广泛应用于工程测量和变形监测中。结合水厂铁矿GPS边坡变形监测实例,对GPS监测网的星历预报、基线向量平差计算、网平差计算、结果及残差不确定度进行了细致分析研究,以验证GPS技术在边坡变形监测中的可靠性和精度。     

Deformation Patterns of an Accretionary Wedge in the Transition Zone from Subduction to Collision Offshore Southwestern Taiwan

Swath bathymetry data and seismic reflection profiles have been used to investigate details of the deformation pattern in the area offshore southwestern Taiwan where the Luzon subduction complex encroaches on the passive Chinese continental margin. Distinctive fold-and-thrust structures of the convergent zone and horst-and-graben structures of the passive margin are separated by a deformation front that extends NNW-ward from the eastern edge of the Manila Trench to the foot of the continental slope. This deformation front gradually turns into a NNE–SSW trending direction across the continental slope and the Kaoping Shelf, and connects to the frontal thrusts of the mountain belt on land Taiwan. However, the complex Penghu submarine canyon system blurs the exact location of the deformation front and nature of many morphotectonic features offshore SW Taiwan. We suggest that the deformation front offshore SW Taiwan does not appear as a simple structural line, but is characterized by a series of N–S trending folds and thrusts that terminate sequentially in an en-echelon pattern across the passive Chinese continental slope. A number of NE–SW trending lineaments cut across the fold-and-thrust structures of the frontal accretionary wedge and exhibit prominent dextral displacement indicative of the lateral expulsion of SW Taiwan. One of the prominent lineaments, named the Yung-An lineament, forms the southeastern boundary of the upper part of the Penghu submarine canyon, and has conspicuous influence over the drainage pattern of the canyon     

台湾及其邻海的重力特征与构造、地震的关系

分析认为，在台湾及其邻海的重力场中，具有短波长特征的空间重力异常受地形与海深所制约．玉山的200×10     

Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.     

大陆岩石圈在张裂和分离时的变形模式

通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的：上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的：上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。     

南海輓近海平面变化与构造升降初步研究

揭示南海輓近海平面变动和古岸线诸多遗迹,探讨晚更新世以来海平面变化一般规律,初步分析南海周缘中全新世和现代地壳构造升降速率,得出本区海平面上升率适中参考值为0.10—2.0mm/a,初步估算未来50年内海平面变化趋势在1.26—4.0mm/a之间;而构造升降受块断差异运动控制,一般规律是南海北部沿岸自东向西递减,由福建南部1.15mm/a至海南岛南部0.54mm/a。近代地壳形变资料亦证实这种变化规律。     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

南海罗斯贝变形半径的地理及季节变化

根据南海 1°× 1°网格的标准层季节平均温、盐度资料 ,在未引入Boussinesq近似条件下 ,采用改进的Thompson Haskell算法求解线性化斜压海洋水平大尺度波的垂直结构方程 (重力内波方程 ) ,从而得到了南海各网格点的第一斜压重力波相速度和相应的罗斯贝变形半径 ,并探讨其地理分布和季节变化特征 ,以期有助于南海环流和中尺度涡旋以及有关海洋侧边界效应的研究。     

Crustal Thinning of the Northern Continental Margin of the South China Sea

Magnetic data suggest that the distribution of the oceanic crust in the northern South China Sea (SCS) may extend to about 21 °N and 118.5 °E. To examine the crustal features of the corresponding continent–ocean transition zone, we have studied the crustal structures of the northern continental margin of the SCS. We have also performed gravity modeling by using a simple four-layer crustal model to understand the geometry of the Moho surface and the crustal thicknesses beneath this transition zone. In general, we can distinguish the crustal structures of the study area into the continental crust, the thinned continental crust, and the oceanic crust. However, some volcanic intrusions or extrusions exist. Our results indicate the existence of oceanic crust in the northernmost SCS as observed by magnetic data. Accordingly, we have moved the continent–ocean boundary (COB) in the northeastern SCS from about 19 °N and 119.5 °E to 21 °N and 118.5 °E. Morphologically, the new COB is located along the base of the continental slope. The southeastward thinning of the continental crust in the study area is prominent. The average value of crustal thinning factor of the thinned continental crust zone is about 1.3–1.5. In the study region, the Moho depths generally vary from ca. 28 km to ca. 12 km and the crustal thicknesses vary from ca. 24 km to ca. 6 km; a regional maximum exists around the Dongsha Island. Our gravity modeling has shown that the oceanic crust in the northern SCS is slightly thicker than normal oceanic crust. This situation could be ascribed to the post-spreading volcanism or underplating in this region.