不同构造环境下的壳─幔过渡带结构

位于中国西北部的天山造山带与准噶尔盆地是典型的盆岭构造。通过对横跨天山造山带与准噶尔盆地的沙雅-布尔津地学断面地震宽角反射、折射资料进行小波分析,获得了天山造山带与准噶尔盆地壳-幔过渡带的详细结构。结果表明,天山造山带的壳-幔间是以多个薄层过渡的。这些薄层的层厚度2～3km不等,层速度高低相间,总厚度约20km,平均速度较低,接近塔里木盆地下地壳的速度。塔里木盆地北缘与准噶尔盆地的壳-幔间不具有这种特点,其壳-幔间主要表现为一级间断面。而位于中国东北部的间阳-海城-东沟深地震测深剖面所揭示的辽东台隆-辽河盆地-燕山台褶带壳-幔过渡带的结构似乎具有完全相反的特征：辽河盆地的壳-幔过渡带比较复杂,它由数个薄层叠合而成,总厚度达15km;辽东台隆与燕山台褶带壳-幔过渡带结构十分简单,皆以一级间断面过渡为主。研究认为,造成二者差异的主要原因是它们所处的构造环境不同：前者为挤压环境,而后者为伸展环境。在挤压环境下,复杂的壳-幔过渡带形成于造山带的下面;而在伸展环境下,复杂的壳-幔过渡带形成于盆地的下面。壳-幔过渡的复杂程度与构造活动性相联系,在一定程度上反映了岩石圈目前的构造活动水平。     

基于矩阵模型进行抗荧光干扰的蓝藻原位检测方法

藻蓝蛋白与叶绿素a作为特征色素常用于表征蓝藻的生物量.藻蓝蛋白与叶绿素a通常用荧光光谱或原位荧光强度检测,但是在实际水体中藻蓝蛋白与叶绿素a的荧光效应相互干扰会影响测量精度,极大限制了该方法的应用.本文根据朗伯比尔定律,利用二阶矩阵模型设计了一套在荧光检测过程中"激发光-发射光"优化抗干扰的波长选择方法,并利用多元线性回归分析建立了两种色素浓度与荧光强度之间的多元校正线性模型,实验验证了所筛选蓝藻荧光分析法中特定激发光和发射光波长的有效性.本研究实现了两种色素检测过程中的成功解耦,可在藻蓝蛋白的原位检测中排除水体中藻蓝蛋白与叶绿素a之间的相互干扰,提高藻蓝蛋白和叶绿素a的原位检测精度,为开发便携式蓝藻检测传感器时的波长选择提供理论基础.     

甘肃省能源消费碳足迹变化及影响因素分析(英文)

能源消费是人类活动影响全球气候变化的主要行为之一,对能源消费导致的碳足迹进行研究具有重要意义。本文首先应用能源消费碳足迹的相关概念和方法,计算得到了甘肃省1990年-2009年的总碳足迹、各能源消费类型的碳足迹、碳足迹产值和碳足迹生态压力;然后利用STIRPAT模型进行岭回归函数拟合,探讨了经济增长与碳足迹之间的定量关系,并验证了环境库兹涅茨曲线的存在性;最后通过脱钩指数分析进一步研究了经济增长与碳足迹之间的动态变化关系。结果表明:碳足迹从1990年的每人0.091 ha上升为2009年的每人0.191 ha,呈现波动上升的趋势。各能源消费类型的碳足迹构成中,煤和石油占据了绝对地位,其中又以煤所占比重最大,石油次之,天然气所起的作用甚微。碳足迹产值由1990年的1.18万元ha-1增加为2009年的2.51万元ha-1,碳足迹生态压力也从1990年的0.10上升至2009年的0.24。人口和人均GDP是驱动碳足迹增长的主要因素,且回归分析和脱钩指数分析都表明经济增长与碳足迹之间存在环境库兹涅茨曲线。     

滇西地区壳幔解耦与腾冲火山区岩浆活动的深部构造研究

根据青藏东部边缘的深部地球物理资料,分析了滇西地区壳幔耦合和腾冲火山区岩浆活动的深部构造特征,确认了地幔各向异性与上地幔速度结构(包括P波速度和S波速度)的内在联系,指出产生这一结果的原因与以腾冲火山区为中心的地幔热物质上涌有关:上地幔顶部平均温度升高导致介质强度降低,在印支块体的侧向挤压或印缅块体的向东俯冲作用下发生韧性变形,造成滇西地区地幔各向异性的快波方向与青藏东部地壳块体的旋转方向不一致.此外,鉴于中下地壳低速层的横向非均匀性,估计韧性流动并非贯通青藏高原的东部边缘,而是被不同的构造块体和边界断裂限定在局部地区.总体而言,滇西地区下地壳的地震波速度和电阻率偏低,具备发生韧性变形的构造条件.作为地壳和上地幔之间的解耦层,它使得青藏东部地壳块体旋转产生的构造应力未能传输至上地幔.腾冲火山区的地壳结构与不同时期的岩浆活动有关,火山区东侧的高速结构代表了上新世时期火山通道内冷凝固结的岩浆侵入体或难以挥发的高密度残留物质,火山区西侧的低速结构反映了更新世以来持续至今的岩浆活动,壳内岩浆源主要分布在10～20km的深度范围内,横向尺度约为15～20km,有可能通过地壳深部的断裂与上地幔岩浆源区相连,估计腾冲火山区下方的岩浆活动将持续进行.     

快速城市化区域耕地变化与经济发展关系研究——以重庆市九龙坡区为例

以重庆市九龙坡区为例,分析了快速城市化区域耕地面积变化与经济发展之间的动态变化特征,并运用脱钩理论深入研究了耕地面积变化与经济发展之间的脱钩情况。结果表明：（1）随着人均GDP的直线增长,九龙坡区的耕地面积不断减少。（2）固定资产投资增长率与耕地面积减少率之间存在一定的同步性,而GDP增长率滞后于耕地面积减少率。（3）九龙坡区耕地面积变化和经济发展之间有类似的库兹涅茨曲线特征,但受耕地面积的自身波动变化影响,库兹涅茨曲线特征不是十分典型。（4）脱钩分析表明九龙坡区以绝对脱钩占主导地位,脱钩指数在波动变化中呈减小趋势。     

Subglacial emplacement of tills and meltwater deposits at the base of overdeepened bedrock troughs

The sedimentary infills of subglacially eroded bedrock troughs in the Alps are underexplored archives for the timing, extent and character of Pleistocene glaciations but may contain excellent records of the Quaternary landscape evolution over several glacial–interglacial cycles. The onset of sedimentation in these bedrock troughs is often reflected by diamicts and gravels directly overlying bedrock in the deepest basin segments. Subglacial or proglacial depositional environments have been proposed for these coarse‐grained basal units but their characteristics and origin remain controversial. This article presents results from drill cores that recovered a coarse‐grained basal unit in a major buried bedrock‐trough system in the Lower Glatt Valley, northern Switzerland. The excellent core recovery allowed a detailed study combining macroscopic, microscopic and geochemical methods and gives unprecedented insights into the transition from erosion to deposition in overdeepened bedrock troughs. These results show that the basal infill comprises diamicts, interpreted as subglacial tills, separated by thin sorted interbeds, originating from subglacial cavity deposition. The stacking of these units is interpreted to represent repeated switching between a coupled and decoupled ice–bed‐interface indicating an ever‐transforming mosaic of subglacial bed conditions. Decoupling in response to high basal water pressures is probably promoted by the confined subglacial hydraulic conditions resulting from the bedrock acting as aquitards, the narrow reverse sloping outlet and a large catchment area. While stratigraphic and lithological evidence suggests that erosion and the onset of basal sedimentation occurred during the same glaciation, different scenarios for the relative timing of infilling in relation to formation and glaciation of the bedrock trough are discussed. Overlying deltaic and glaciolacustrine sediments suggest deposition during subsequent deglaciation of the bedrock trough. The basal sediment characteristics are in agreement with previous reports in hydrogeological and seismic exploration and suggest the occurrence of similar basal successions in other subglacially overdeepened basins in the Alps and elsewhere.     

利用海底电缆探测太平洋地区地幔结构的研究进展

介绍了地幔电性结构、地幔温度、地幔含水量等参数对地球动力学和地幔动力学过程的重要科学意义,综述了近年来利用海底电缆在该领域的主要研究进展.本文首先介绍了日本利用海底电缆探测地幔深部结构的方法原理与发展历程,然后阐述了该方法的观测方式、观测系统与仪器,综述了国际上近年来利用海底电缆在环太平洋地区海底的观测资料进行地幔一维电导率结构、三维电导率分布的研究进展.基于海底电缆的观测数据进行反演的结果表明,太平洋海域地区地球深部存在410 km,660 km的电导率不连续面,此不连续面与地震资料的波速不连续面基本一致,为地幔不连续面提供了新的地球物理证据.在根据由海底电缆观测数据反演得到的太平洋地区地球内部电导率分布基础上,综述了综合深部地震波速、岩石高温高压实验等,将电导率的分布转换为地球内部的温度场分布、推导地幔过渡带水的浓度进而转换为地幔过渡带的含水百分比(含水量)的方法技术与研究进展.研究结果表明,夏威夷和北日本海地幔过渡带电导率异常主要受温度控制,菲律宾海域地幔过渡带的电导率异常除了和温度有关外,还受含水量影响,该处地幔过渡带的含水量大约在1％左右.这些研究表明,海底电缆探测方法,在地球深部探测尤其是地幔不连续面的探测、地幔温度场分布与特征、地幔含水量等方面有重要的作用.最后,展望了海底电缆探测方法的研究与发展,这些研究方法及成果对认识中国海域地球内部机构提供一定的参考.     

川东褶皱带构造发育深度层次与变形样式

地壳上层的结构特征和变形样式在垂直方向上的变化远远大于其在水平维度上的分异。川东褶皱带自晚古生代以来地史演化统一、地层展布稳定,之后新生代盆、山演化分异幅度较大,使得不同深度的地层和基底得以出露,不同地壳深度层次的构造样式得以展示,这为研究应力的垂向分异,提供了很好的条件。本文基于地壳垂直方向上变形几何的不守恒、构造脱耦以及构造层次的概念,通过野外构造现象的详细解析、野外脆性破裂产状统计、断裂之间交切关系以及活动性质观察等综合分析,结合遥感图像研究,对川东褶皱区隔挡式褶皱和隔槽式褶皱形成提出了新的解释模型。以华蓥山与齐岳山为界,川东褶皱带被分为3个呈叠置关系的区域。研究表明华蓥山以西(Ⅰ区)没有发生强烈的构造变形,变形深度最小(<2 km); 华蓥山与齐岳山之间(Ⅱ区)构造样式为在北北东向剪切作用下形成的陡立构造面理,变形深度为2～5 km; 而齐岳山以东(Ⅲ区)的构造样式是发育轴向北东的宽缓褶曲,变形深度为4～6.6 km。研究分析后得出,川东褶皱带在晚古生代以来,没有经历过大幅度的地壳垂向运动和明显的旋转运动,而白垩纪以后,发育了早期北北东向和晚期北东向的两期构造变形。Ⅱ、Ⅲ两区的构造样式发育于同一应力场(北西-南东主应力场),而晚期北东向断裂活动是形成上述3个区域呈现出断块并置的原因。另外,由于后期不同断块抬升和剥露的差异,使3个区域迥异的构造样式呈现在地表。这一认识对研究油气相关的构造圈闭、固体多金属矿产相关的矿床深度问题以及大地构造学等问题都有创新意义。     

Petrogenesis and geodynamic significance of the late Palaeozoic Dongwanzi Complex,North China Craton: constraints from petrological,geochemical, and Os-Nd-Sr isotopic data

The late Carboniferous Dongwanzi Complex in the northern North China Craton is composed of intrusive pyroxenite, hornblendite, gabbro, and syenite. The mafic-ultramafic rocks of the complex exhibit typical cumulate textures, curved-upward REE patterns, and variable contents of compatible elements, suggesting a cumulate origin. The syenite shows Sr-Nd isotopic ratios similar to the mafic-ultramafic complex and positive Eu anomalies in the chondrite-normalized REE patterns, suggesting that the syenite may represent residual melt after significant fractional crystallization of mafic melt. The mafic-ultramafic cumulates have low HREE abundance and high (Tb/Yb)_N (2.5–4.2) and Dy/Yb ratios (>2), indicating that they may have originated from melting of garnet peridotite in the mantle. The Dongwanzi Complex is characterized by a large variation in Sr-Nd isotopic composition, with I_Sr = 0.7035 to 0.7052 and ε_Nd(t) = ?4.0 to +5.2, which may be accounted for by mixing melts of depleted asthenospheric and enriched lithospheric sources. The radiogenic Os isotopic compositions of the complex ((¹⁸⁷Os/¹⁸⁸Os)_i = 0.1344 to 0.3090) suggest slight contamination by mafic lower crust (≤2.5% based on Os isotopic modelling). The Dongwanzi Complex exhibits arc-related whole-rock and mineral geochemical affinities, such as enrichment in LILE (e.g. Sr, Ba, K) and depletion in HFSE (e.g. Nb, Ta, Ti). The abundance of hornblende and high CaO contents (22–24 wt.%) of clinopyroxene suggest that the source was rich in H₂O, probably due to the formation above a subduction zone. We conclude that the Dongwanzi Complex and the related crust–mantle interactions probably reflect formation in a back-arc extensional environment related to the subduction of the Palaeo-Asian Ocean beneath the northern margin of the North China Craton in late Palaeozoic time.     

Enriched finite element procedures for analyzing decoupled bolts installed in rock mass

Numerical procedures are developed to analyze interaction between fully grouted bolts and rock mass using ‘enriched finite element method (EFEM)’. A solid element intersected by a rock bolt along any arbitrary direction is termed as ‘enriched’ element. The nodes of an enriched element have additional degrees of freedom for determining displacements, stresses developed in the bolt rod. The stiffness of the enriched element is formulated based on properties of rock mass, bolt rod and grout, orientation of the bolt and borehole diameter. Decoupling at grout–bolt interface and elasto‐plastic behavior of rock mass have also been incorporated into the EFEM procedures. The results of this method are compared with analytical pull‐out test results presented by Li and Stillborg (Int. J. Rock Mech. Min. Sci. 1999; 36 :1013–1029). In addition, a numerical example of a bolted tunnel is provided to demonstrate the efficacy of the proposed method for practical applications. Copyright © 2010 John Wiley & Sons, Ltd.