Implicit integration under mixed controls of a breakage model for unsaturated crushable soils

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.     

A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.     

PPP/SINS紧耦合系统仿真的研究与分析

在捷联惯导(SINS)和GPS卫星接收机进行紧耦合的研究中,采用差分定位进行紧耦合的方法比较成熟,而关于精密单点定位(PPP)与捷联惯导紧耦合的研究还比较少。本文对精密单点定位与捷联惯导紧组合系统进行了Matlab仿真,利用数学解析的方法产生机载运动轨迹,通过设置系统的参数,获得仿真SINS和GPS数据;然后,通过PPP/SINS紧组合系统的仿真程序解算,将定位结果与PPP的结果比较,表明PPP/SINS紧组合导航定位的结果比PPP的精度和可靠性好,而且收敛的速度更快,同时也验证了算法的正确性。最后,分析了不同等级惯导对定位精度的影响。     

The evolution of the electronics industry in Johor (Malaysia): Strategic coupling,adaptiveness, adaptation,and the role of agency

Bringing together concepts from the global production networks and evolutionary economic geography literature, this article empirically examines the trajectory of the electrical and electronics industry in Johor (Malaysia). Based on trends in firm entries and exit as well as interviews with companies, we find limited robustness in the industry’s trajectory. While there is evidence of the role of ‘structure’ in this outcome, we argue that human agency – particularly the actions of subnational policy-makers – is key. This is manifest in a preference for fostering regional ‘adaptiveness’ through the often uncritical promotion of a diversity of economic sectors. This compromises the meaningful pursuit of regional ‘adaptation’ in the form of new and more complex branches emerging from existing industries. This arrested development, in turn, hinders an effective strategic coupling between the regional economy and multinational corporations, thus undermining regional resilience.     

塔西台地寒武纪沉积环境演化与海陆耦合

碳酸盐岩台地作为陆地与深海间的过渡带,其沉积记录了海洋和邻近陆地的演化。结合已有的沉积学工作,对塔里木盆地西部台地寒武系碳酸盐岩进行全岩及酸不溶物地球化学研究。塔西台地寒武纪主要发育局限台地、局限-蒸发台地或蒸发台地相沉积。碳酸盐岩的地球化学特征主要受沉积环境和成岩作用影响,对研究区寒武系白云岩来说,其元素组成极易受沉积微相的控制,氧同位素组成则很可能已被成岩作用改造,仅原生、准同生白云岩的Sr/Ba、Fe/Mn和C同位素可反映沉积相演化对应的古盐度、离岸距离等沉积环境特征的变化,酸不溶物化学蚀变指数（CIA值）则指示邻近陆地的化学风化强度与气候特征。寒武纪时期,塔西台地在相对海平面较高时发育局限台地相沉积,以水体盐度较低、沉积环境离岸较远和生物活动相对较弱为特征,陆地化学风化强度适中,气候温暖湿润;在相对海平面较低时发育蒸发台地相沉积,具有水体盐度较高、沉积环境离岸较近和生物活动相对较强等特点,陆地化学风化强烈,气候炎热极端;在相对海平面适中时发育局限-蒸发台地,沉积环境和邻近陆地的特征介于前述二者之间。沉积相演化对应的较长周期的海陆演化可能主要受全球海平面升降及宏观气候变化控制,具体表现为相对海平面升降所导致的海相沉积环境的变化,以及气候变化引起的陆地化学风化强度的变化。寒武纪塔西台地所处区域的海洋-陆地演化具有高度耦合的特征。     

梧州某安置小区滑坡分析与治理设计研究

文章从地层岩性、地质构造、水文地质条件等方面阐述该滑坡的基本特征,运用传递系数法对滑坡进行了稳定性分析与评价,为滑坡治理设计提供了依据。根据计算结果提出了采用削坡、预应力锚索+格构梁+锚杆挂网喷射混凝土防护,并结合生物防护及地表排水措施,具有较高的实践和理论意义。     

基于势流理论和OpenFOAM的耦合模型对多向不规则波浪的模拟

基于势流理论的数值水池可以快速计算波浪的传播及其对建筑物的作用,但是势流理论是基于波浪的无黏性假设的,而在工程中,通常需要在固体边界及波浪破碎的区域考虑黏性效应。针对基于求解Navier-Stokes方程的黏性水池计算量较大、速度较慢的缺点,采用耦合的方法模拟多向不规则波浪的传播,即在外域通过基于势流理论的数值水池产生多向不规则波浪,内域采用求解Navier-Stokes方程和流体体积法(VOF方法)对自由表面进行追踪,通过外域所提供的边界波浪,内域计算可以在较小区域进行计算,从而达到减少计算量、提高计算效率的目的。     

显微荧光光谱技术在油气成藏研究中的应用——以塔里木盆地巴什托上古生界油气藏为例

根据原油在紫外光的激发下产生荧光的特点,通过显微荧光光谱方法,对有机包裹体的荧光光谱进行定量化分析,利用其主峰波长与荧光强度、主峰波长与红/绿商的相关性,对塔里木盆地巴什托上古生界油气藏的成藏特征进行了初步研究。在研究区所采集的32块岩石样品中共获得64个荧光光谱数据。分析结果表明,巴什托上古生界油气藏存在3个油源,其主峰波长主要集中在439~443nm、469~472 nm和498~503 nm三个值段上,且为不同演化阶段的混源充注。前两者来自于寒武—奥陶系烃源岩,由下至上充注成藏;后一油源来自于石炭系巴楚组,随演化程度的变化同时向上、下两个方向充注。综合同期捕获不同主峰波长的有机包裹体,推测研究区至少存在4期油充注、1期天然气充注。