A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.     

Geochemistry of Paraná-Etendeka basalts from Misiones,Argentina: Some new insights into the petrogenesis of high-Ti continental flood basalts

The Early Cretaceous (∼135–131 Ma) Paraná-Etendeka continental flood basalts, preserved in bulk in the Paraná basin of southern Brazil and vicinity, have been divided into low-Ti and high-Ti types that govern the southern and northern halves of the basin, respectively. We have examined a new sample set from the southern margin of the northern high-Ti segment of Paraná basalts in Misiones, northeastern Argentina. These basalts are strongly to moderately enriched in TiO₂ (2–4 wt.%), have relatively high Ti/Y (300–500), low MgO (3.5–6.5 wt.%), and high Fe (FeO(tot) 12–14 wt.%) and belong to the Pitanga and Paranapanema magma types of Peate et al. (1992). Nd and Sr isotope compositions are quite unvarying with ε_Nd (at 133 Ma) values of −4.6 to −3.6 and initial ⁸⁷Sr/⁸⁶Sr of 0.7054–0.7059 and show no variation with fractionation. Compared to high-Ti lavas in the central and northern parts of the Paraná high-Ti basalt segment, the lavas from Misiones are similar to those in the northeastern magin of the basin but less radiogenic in initial Nd isotope composition than those in the central part. This variation probably reflects mixed EM1-EM2 source components in the sublithospheric mantle. A polybaric melt model of a sublithospheric mantle source at the garnet lherzolite-spinel lherzolite transition is compatible with the observed Ti budget of the Pitanga and Paranapanema lavas, regardless of the Nd isotope composition of their purported source.     

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.     

电感耦合等离子体质谱法(ICP-MS)测定水系沉积物中的铌钽锆铪

建立电感耦合等离子体质谱法(ICP-MS)测定水系沉积物中铌、钽、锆、铪四种元素的分析方法。将样品与氢氧化钠、过氧化钠混合物放入高温炉中,熔融分解完全,用热水提取,过滤后弃去滤液,将滤纸及沉淀用酒石酸-盐酸溶液溶解,稀释至刻度测定。方法检出限(3s)为:LD(Nb)=0.08μg/g,LD(Ta)=0.04μg/g,LD(Zr)=0.5μg/g,LD(Hf)=0.04μg/g,精密度(RSD%,n=6)为:0.84%~4.21%。该测定方法具有灵敏度高、精密度好、分析速度快、线性范围宽、操作性强等优势。采用该方法对国家一级标准物质进行测定表明,其结果与标准值吻合。此方法已在实际地质调查样品分析中得到应用。     

贵州桐梓新桥浑水河的成因再探讨

通过对新桥浑水河上游明流段、中部伏流段、下游浑水河段实地调查,并结合该区1:20万区域地质资料、区域水文地质资料及煤矿勘查资料,在分析浑水河区域构造背景及水文地质特征的基础上,研究了浑水河的水动力条件,包括纵向水动力条件和横向水动力条件,认为浑水河是特殊构造通道、水土流失带来的粘土颗粒物源、携带粘土颗粒的水体进入地下伏流,粘土颗粒在河床中沉积后又被流水带出的一个过程,即"流失→带进→沉积→带出"过程。浑水河的成因:1浑水河的特殊构造,具备了通道条件;2上游水土流失带来的大量细小粘土颗粒提供了物源;3洞湾水体"盲谷"是浑水的物源载体;4地下伏流的水动力条件,包括纵向水动力条件和横向水动力条件,四者共同作用的结果。     

均生函数与BP神经网络耦合模拟预测模型(MGF-BP-I)的建立与应用

水文气候因子模拟预测对气候变化研究、农业墒情预报、生态环境改善、水资源合理开发利用等具有一定参考意义。均生函数、BP神经网络及其结合改进方式在模拟预测中各有优点,被广泛应用,但仍有进一步改进空间。针对MGF、MGF-OSR、MGF-OSR-BP等方法粗选因子集、粗选集组合筛选、收敛适应性、精度控制等可改进空间,进一步发挥均生函数和BP神经网络优势,建立了MGF-BP-I模拟预测模型。利用MGF-OSR、MGF-OSR-BP、MGF-BP-I对科尔沁沙地区域平均年降水进行了模拟预测。结果表明,建模期MGF-OSR-BP、MGF-BP-I拟合效果均较好,MGF-BP-I建模阶段最优模式精度优于MGF-OSR-BP,MGF-BP-I整体同时最优模式结果也非常好。检验期,MGF-BP-I检验阶段最优及整体同时最优两种模式拟合效果最好,相比其他模式精度有所提高。MGF-BP-I考虑更加全面,充分发挥了均生函数和BP神经网络优势,精度远高于MGF-OSR和MGF-OSR-BP,MGF-BP-I整体同时最优模式更符合实际应用,效果理想,可用于水文气候因子模拟预测。     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.     

Uncertainty analysis of space–time prisms based on the moment-design method

Space–time prism (STP) is an important concept for the modeling of object movements in space and time. An STP can be conceptualized as the result of the potential path of a moving object revolving around in the three-dimensional space. Though the concept has found applications in time geography, research on the analysis and propagation of uncertainty in STPs, particularly under high degree of nonlinearity, is scanty. Based on the efficiency and effectiveness of the moment-design (M-D) method, this paper proposes an approach to deal with nonlinear error propagation problems in the potential path areas (PPAs) of STPs and their intersections. Propagation of errors to the PPA and its boundary, and to the intersection of two PPAs is investigated. Performance of the proposed method is evaluated via a series of experimental studies. In comparison with the Monte Carlo method and the implicit function method, simulation results show the advantages of the M-D method in the analysis of error propagation in STPs.     

桩锚支护深基坑施工过程变形特征分析

以济南市某大型深基坑工程为依托,通过FLAC3D对深基坑工程不同施工阶段的变形特性进行了数值计算分析;桩锚支护深基坑,地表最大竖向变行产生在距离基坑边缘10 m位置处,且最大竖向变形量为46.16 mm;最大水平位移发生在桩顶冠梁位置处,最大水平位移为53.45 mm,是基坑支护最薄弱环节,基坑呈现三角形状向内侧滑动的趋势。