Free radical scavenging abilities of polypeptide from Chlamys farreri

1 INTRODUCTION Active oxygen free radicals can damage cell structure, even kill the cells, causing aging and cer- tain serious diseases (Bors et al., 1989). Usually, the production and scavenging of active oxygen free radicals are in balance in healthy hu…     

Implications of low-pass filtering on power spectra and autocorrelation functions of turbulent velocity signals

Filtering either through the electronics of an instrument or through digital procedure is performed routinely on geophysical data. When velocity fluctuations are measured in turbulent flows using electromagnetic current meters (ECMs), a builtin lowpass Butterworth filter of order n usually attenuates fluctuations at high frequencies. However, the effects of this filter may not be acknowledged in turbulence studies, thus impeding comparisons between data collected with different ECMs. This paper explores the implications of the filters on the characteristics of velocity signals, mainly on variance, power spectra, and correlation analyses. Variance losses resulting from filtering can be important but will vary with the order n of the Butterworth filter, decreasing as n increases. Knowing the filter response, it is possible to reconstruct the original signal spectrum to evaluate the effect of filtering on variance and to allow comparisons between data collected with different instruments. The autocorrelation function also is affected by filtering which increases the value of the coefficients in the first lags, resulting in an overestimation of the integral length scale of coherent structures. These important effects add to those related to size and shape differences in ECM sensors and must be taken into account in comparative studies.     

沉积钙质白云石带状面缺陷的择优取向

作者用透射电子显微镜研究了沉积钙质白云石中的带状面缺陷。在衍衬象中面缺陷呈现出特有的条纹衬度,并具有一定的择优取向,它们沿着｛018｝面排列。面缺陷也可分叉,分枝部分平等于｛2－／10｝面。根据白云石面缺陷的取向,本文提出了鞍状白云石宏观弯曲面和微观面缺陷的取向关系。     

贵州和四川盆地云量的气候研究

贵州和四川盆地是我国云量最多的地区,素有“天无三日晴”和“蜀犬吠日”之说,盆地西缘的雅安古时还有“雅州天漏”的谚语。从全球日照百分率分布推知,川黔地区也是世界上天气最阴沉的地区之一。川黔之阴一向为国内外气象界所注意,本文根据1951—1980     

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.     

Dynamic recrystallization near the brittle-plastic transition in naturally and experimentally deformed quartz aggregates

The electron backscattering diffraction technique (EBSD) was used to analyze bulging recrystallization microstructures from naturally and experimentally deformed quartz aggregates, both of which are characterized by porphyroclasts with finely serrated grain boundaries and grain boundary bulges set in a matrix of very fine recrystallized grains. For the Tonale mylonites we investigated, a temperature range of 300–380 °C, 0.25 GPa confining pressure, a flow stress range of ~ 0.1–0.2 GPa, and a strain rate of ~ 10^− 13 s^− 1 were estimated. Experimental samples of Black Hills quartzite were analyzed, which had been deformed in axial compression at 700 °C, 1.2–1.5 GPa confining pressure, a flow stress of ~ 0.3–0.4 GPa, a strain rate of ~ 10^− 6 s^− 1, and to 44% to 73% axial shortening. Using orientation imaging we investigated the dynamic recrystallization microstructures and discuss which processes may contribute to their development. Our results suggest that several deformation processes are important for the dismantling of the porphyroclasts and the formation of recrystallized grains. Grain boundary bulges are not only formed by local grain boundary migration, but they also display a lattice misorientation indicative of subgrain rotation. Dynamic recrystallization affects especially the rims of host porphyroclasts with a hard orientation, i.e. with an orientation unsuitable for easy basal slip. In addition, Dauphiné twins within porphyroclasts are preferred sites for recrystallization. We interpret large misorientation angles in the experimental samples, which increase with increasing strain, as formed by the activity of fluid-assisted grain boundary sliding.     

A preliminary stable isotope study on Mogok Ruby, Myanmar

The primary occurrence of ruby in the Mogok area, northern Myanmar is exclusively found in marble along with spinel–forsterite-bearing marble and phlogopite–graphite marble. These marble units are enclosed within banded biotite–garnet–sillimanite–oligoclase gneisses. Samples of these marbles collected for C–O stable isotope analysis show two trends of δ¹³C–δ¹⁸O variation resulting most likely from fluid–rock interactions. Ruby-bearing marble and phlogopite–graphite marble follow a trend with coupled C–O depletion, whereas spinel–forsterite-bearing marble follows a δ¹⁸O depletion trend with relatively constant δ¹³C values. Ruby formation might have resulted from CO₂-rich fluid–rock interaction, while spinel–forsterite-bearing marble was genetically related to CO₂-poor fluid–rock interaction. Both fluids may have arisen from external sources. Based on graphite Raman spectral thermometry, the estimated temperature for phlogopite–graphite marble, and probably ruby-bearing marble, was lower than 607 °C, and for spinel–forsterite-bearing marble, lower than 710 °C. Contrasting C/O diffusion between graphite/ruby/spinel/forsterite and calcite, local variations of isotopic compositions of newly formed minerals as a result of non-pervasive fluid infiltration, and open-system isotopic disturbance during cooling may have affected C-/O-isotopic fractionations between minerals. The estimated high formation temperatures for ruby and spinel/forsterite imply that the parental fluids may have been related to nearby igneous intrusions and/or metamorphic processes. Whether these two types of fluid were genetically related is unclear based on the present data.     

“Cretaceous black flysch” in the Pieniny Klippen Belt, West Carpathians: a case of geological misinterpretation

This is a critical assessment of the paper by Oszczypko et al. (2004: Cretaceous Research 25, 89–113), in which they tried to prove a mid-Cretaceous age for the Szlachtowa (“black flysch”) and Opaleniec Formations, in the Pieniny Klippen Belt, West Carpathians, both of which had previously been shown to be of Jurassic age. We argue that the mid-Cretaceous age assignment is a misinterpretation, primarily resulting from their field samples having been collected from some Cretaceous lithostratigraphic units, tectonically associated with the Jurassic formations, and/or from tectonic contact-breccias involving Jurassic and Cretaceous strata. In addition, we suggest that they have overlooked a number of significant palaeontological papers, published since 1962, which record the presence of in situ ammonites, aptychi, belemnites, thin-shelled bivalves (Bositra), gryphaeids, foraminifera, and ostracod assemblages, all indicating a Jurassic (mainly Aalenian), and not a Cretaceous, age for the Szlachtowa Formation, and also the in situ Jurassic (Bajocian) ammonites and thin-shelled bivalves (Bositra), Bositra-microfacies, and age-diagnostic foraminiferal assemblages of the Opaleniec Formation.Our presentation here of recently published dinocyst data from well-preserved assemblages further supports the Jurassic ages for the Szlachtowa (“black flysch”) and Opaleniec Formations.     

碱消解-高效液相色谱-电感耦合等离子体质谱法测定生物样品中的甲基汞和乙基汞

建立了碱消解-高效液相色谱-电感耦合等离子体质谱联用系统测定生物样品中甲基汞(MeHg)与乙基汞(EtHg)的分析方法。为提高灵敏度,选用微流量的PFA雾化器,在优化的检测条件下,MeHg及EtHg检出限可达到0.036μg/L和0.03μg/L;线性范围达到4个数量级,两条工作曲线线性相关系数为1。对1.78μg/L MeHg、1.65μg/L EtHg的混合标准溶液重复测定7次,色谱峰面积的相对标准偏差(RSD)分别为1.79%和1.44%。对标准物质BCR 464(金枪鱼)的分析结果表明,测定值与标准值基本吻合,但略低于标准值;甲基汞和乙基汞的加标回收率分别为85.9%和84.5%。高效液相色谱与质谱联用技术的高灵敏度和低检出限能够满足生物样品中汞形态定量分析的要求。     

徐州土壤多环芳烃的环境地球化学迁移特征

选择江苏徐州黄棕壤进行不同深度层位多环芳烃含量的定量分析,研究并探讨了多环芳烃在土壤深度剖面中的地球化学迁移特征。研究结果显示,多环芳烃在徐州土壤剖面中主要集中在地表0~20 cm内。其中低环多环芳烃化合物的迁移能力较强,4~6环等高环化合物相对较难迁移,主要残留于地表生态系统环境中。