改性黏土对褐潮生物种Aureococcus anophagefferens的去除研究

褐潮是一种由微微型藻引发的藻华,已连续4年在渤海海域暴发,给当地带来巨大的经济损失。目前,在褐潮尚不能有效预防、预控情况下,如何控制和减少其对生态环境和沿海经济带来的危害,成为一个急需解决的问题。利用改性黏土消除藻华是一种快速有效、并得以多次现场成功应用的方法。考察比较了多种不同产地、不同类型的黏土及其改性后对褐潮生物种Aureococcus anophagef ferens(抑食金球藻)的去除效果,选取5种典型的黏土作为主要的实验材料,开展了不同条件下黏土及其改性后对A. anophagef ferens去除效率的影响研究。实验发现,因A. anophagef ferens个体微小、藻华时密度大,相同用量的黏土或改性黏土对其去除效率低于常见的硅藻、甲藻生物;不同类型黏土对其去除效率有影响,高岭土的去除效率高于蒙脱土;而黏土改性后对A. anophagef ferens的去除效率提高3倍以上。在此基础上,还考察分析了黏土粒径、分散介质等因素对A. anophagef ferens去除效率的影响,为进一步研发安全、高效的褐潮应急消除材料做了有益探索。     

盐度对近江牡蛎耗氧率、排氨率、O:N 和吸收率的影响

以半现场流水槽法研究了不同盐度(5、10、15、20、25、30、35)对近江牡蛎(Crassostrea hongkongensis)耗氧率、排氨率、O:N、吸收率的影响,并测定了盐度为20条件下牡蛎耗氧率和排氨率的周日变化.结果表明,近江牡蛎耗氧率、排氨率、O:N先随着盐度的升高而下降,在20左右降到最低,随着盐度继续上升,又升高;而近江牡蛎的吸收率先随着盐度的升高而升高,在20左右达到最高,然后随盐度升高而下降.根据数据得出耗氧率与盐度的拟合方程: y=0.0033x2-0.1161x+1.5523, R2=0.9018;排氨率与盐度:y=0.0001x2-0.0041x+0.0871, R2=0.9889;O:N与盐度:y=0.0016x3-0.0782x2+0.9051x+10.818, R2=0.955;吸收率与盐度: y=-0.0011x2+0.0399x+0.4393.R2=0.9453.一日内,8时、14时、19时、22时4个时间点,近江牡蛎耗氧率和排氨率变化较大,在14时最大,表明该时点其代谢活动最强.     

尼日尔盆地油藏水道沉积构型识别及演化规律

深海水道作为深水环境中重要的储层类型,具有极为丰富的深海油气资源,近年来一直是深海油田勘探和开发的重点区域,但对水道内部构型边界的识别刻画仍然是一个难点。依据三维地震数据以及测井和岩心资料,对西非X油藏水道进行了内部构型边界的精细划分,并分析了其水道演化模式。研究表明：区内水道体系边界可通过地震相特征差异进行识别,并将其分为限制性、半限制性和非限制性3种类型;复合水道边界可通过“垂向分期”和“侧向划界”原则进行确定;单一水道边界可通过水道边界振幅强弱变化进行识别,其在平面上有单侧向迁移和沿下游摆动迁移2种迁移模式,在剖面上单向侧向迁移段水道呈侧向迁移的特征,沿下游摆动段呈现出多期水道相互摆动切叠的特征;水道体系的演化可划分为初始形成、快速发育、平稳发育以及水道消亡4个阶段,对应一个完整的海平面变化旋回。     

Intra-plant differences in seaweed nutritional quality and chemical defenses: Importance for the feeding behavior of the intertidal amphipod Orchestoidea tuberculata

As a result of their morphological complexity, large macroalgae show intra-thallus variations in their nutritional composition and secondary metabolite content, which influences the trophic ecology of herbivorous invertebrates, and ultimately their fitness. In this study, we evaluated for the first time the variability in nutritional quality (protein content, carbohydrates, lipids, and total organic matter), secondary metabolites (phlorotannins), and structure (shape and toughness) between blades and stipes of the macroalgae Durvillaea Antarctica. Specifically, we looked at their effect on feeding preference, rate of consumption, absorption efficiency, and growth rate of the amphipod Orchestoidea tuberculata, one of the most abundant organisms on Chilean sandy beaches. Proteins, carbohydrates, total organic matter and phlorotannin contents were significantly higher in blades than in stipes. Preference experiments revealed that the amphipods preferred blades when fresh pieces of blades and stipes were offered at the same time. Similar results were found when artificial food (in which structures of both parts of the alga were standardized) was offered, suggesting that shape and toughness of the two different parts of the alga did not influence preference patterns of O. tuberculata. Absorption efficiency of O. tuberculata was higher on blades compared to stipes. When the amphipods were kept with each of the algal parts separately (i.e. no choice), they consumed a significantly higher amount of stipe, which suggests that O. tuberculata used food quantity to compensate for the lower nutritional quality of stipes. The higher nutritional values of blades compared to stipes appears to explain observed preference patterns by O. tuberculata. Phlorotannin content did not appear to inhibit blade consumption, suggesting that the nutritional quality of the food could be more important than chemical defense in determining food choice in O. tuberculata. Growth did not differ between the amphipods maintained with either blades or stipes (i.e. no choice), which is consistent with the hypothesis of compensatory feeding. To conclude, O. tuberculata can actively select specific parts of an alga and this selection appears to be based on nutritional quality. The capacity for using different feeding strategies allow O. tuberculata, in some cases, to successfully exploit food types with different nutritional qualities.     

高效铝合金牺牲阳极的研究

在铝中添加合金元素Zn,Mg,In,Ga,Ca,利用正交设计方法,研制出一种高效的铝合金牺牲阳极,它在海水中的电流效率达95.6％,电位为-1.09V(SCE)。并研究了合金元素In,Ga,Ca对铝合金电化学性能的影响及阳极活化机理。     

陡坡复杂扇体油藏评价思路与方法

本文以东营凹陷北部陡坡带为例论述了陆相断陷盆地陡坡复杂扇体油藏评价思路与方法。分析了陡坡带特殊性及复杂性,针对复杂扇体油藏精细等时地层对比、控砂机制、有效储层划分和油气分布的纵向分带性提出了有效的研究方法,并形成了一整套有针对性的勘探技术流程,在东营凹陷乃至济阳坳陷具有较好的推广前景。     

A comparative study of energy performance of hydrostatic seafloor sediment samplers and a new high-efficiency sampler

The hydrostatic energy of high-pressure seawater is a renewable and green energy source for ocean exploration and have been used to replace underwater electrical energy transmission through the cable and underwater battery pack to power seafloor equipment. The advantage of the energy supply method is the cost-effective and the robustness. In the paper, the energy performance of the existing hydrostatic seafloor sediment samplers powered by seawater hydrostatic energy are modelled and analyzed and compared. In view of the common shortcoming of existing technology, a novel hydrostatic seafloor sediment sampler is proposed. The model of energy conversion of the new sampler is built, and its energy performance is obtained. The analysis results indicate that the energy conversion efficiency of the novel sediment sampler is much higher than the existing ones, which means that the new sampler can collect much longer sample with the limited amount of hydrostatic energy. The seawater hydrostatic energy conversion system of the new sampler can also be used to power other seafloor equipment.     

鄂尔多斯盆地北部塔巴庙地区下石盒子组盒3段储层特征及有利区块预测

根据野外剖面、钻井岩芯和测井等资料,系统地对塔巴庙地区下石盒子组盒3段储集砂体的岩石学特征、孔隙类型、成岩作用以及物性进行了详细的分析。研究表明,储集层的成分和结构成熟度低;主要孔隙类型有粒间孔、粒内溶孔、晶间溶孔、铸模孔和粒缘缝;孔隙度为0.7%~18.69%,平均值为7.82%;渗透率为0.008×10^-3μm²~23.01×10^-3μm²,平均值为1.111×10^-3μm²,属于物性中-偏低的微孔-溶孔型组合型储集岩。影响储集层的主控因素包括:(1)河道控制了优质储层的分布范围和规模;(2)成岩期早期环边绿泥石胶结、溶蚀等建设性成岩作用是形成储层的基础;(3)成岩相扩大了储层的分布范围,改善了储层的物性。在上述研究的基础上,结合储集砂体的沉积微相特征、物性平面展布特征、储集砂体成岩相特征,在研究区内圈定了Ⅱ、Ⅲ两类有利勘探区块,为研究区下一步的勘探、开发提供了科学依据。     

Effectiveness of structural control based on control energy perspectives

A computational algorithm for maximizing the control efficiency in actively controlling the elastic structural responses during earthquake is proposed. Study of optimal linear control using a single degree of freedom shows that applying active control is very effective in reducing the structural displacement and velocity responses for long‐period structures, but at the same time it has an adverse effect in increasing the absolute acceleration response. The extent of this adverse effect reduces the effectiveness of the control system, and therefore it poses a limit on the maximum control force in order to provide maximum control efficiency. In view of this shortcoming, maximum control energy dissipation is used to define the most effective optimal linear control law. Less displacement and velocity response are expected as larger control force is applied, but there is always a limit that maximum control energy can be dissipated. This study shows that this limit depends on the structural characteristics as well as the input ground motion, and a general trend is that the maximum control energy decreases as damping increases. Finally, application of the proposed algorithm on a six‐storey hospital building is presented to show the effectiveness of using optimal linear control on a multi‐degree‐of‐freedom system from the control energy perspectives. Copyright © 2001 John Wiley & Sons, Ltd.