填充墙与钢框架协同工作性能非线性分析

在试验研究的基础上，运用ANSYS有限元中的接触单元建模，对加气混凝土填充墙钢框架的结构性能进行了研究，同时与纯钢框架结构在强度、刚度、以及延性等方面进行了对比分析，结果表明：填充墙与钢框架协同工作能够改善钢框架结构的受力性能和抗震能力，这为钢结构及其围护体系的研究与推广应用提供了一定的理论依据。     

拱形波纹钢屋盖动力特性测试及分析

拱形波纹钢屋盖是一种新颖的金属拱形薄壳结构，在我国已经得到了广泛的应用。由于结构的复杂性，目前有关的理论研究尚不够深入，动力研究还很少有人涉及。以18m和30m两种跨度的W666型拱形波纹钢屋盖为研究对象，测试了拱在竖向平面内振动时的频率、振型及阻尼。在所提简化计算模型的基础上，采用有限元方法计算了结构的动力特性，其结果与试验数据符合较好。测试和分析结果为该结构的动力反应研究提供了方便。     

油气储运系统钢结构设备地震火灾效应研究

预防和减轻油气储运系统地震火灾危险性是防震减灾中的重要课题。本文论述了油气储运系统的地震火灾特征及防火要求，对钢结构的防火涂料在遭到破坏和平时情况下的抗火性能进行了对比分析，并应用有限元法对油气储运系统中典型钢结构设备在地震火灾荷载作用下的抗火性能进行了数值模拟。研究结果表明，防火涂料遭到强地震荷载破坏后，钢结构的抗火性能大大降低。     

Pure aluminium shear panels as dissipative devices in moment‐resisting steel frames

The use of energy dissipation systems for the seismic control of steel structures represents a valid alternative to conventional seismic design methods. The seismic devices currently employed are mostly based on the metallic yielding technology due to the large feasibility and efficiency they can provide. Within this context, in the current paper an innovative solution based on the adoption of low‐yield‐strength pure aluminium shear panels (SPs) for seismic protection of steel moment‐resisting frames is proposed and investigated. In order to prove the effectiveness of the system, a wide numerical study based on both static and dynamic non‐linear analyses has been carried out, considering a number of different frame‐to‐shear panel combinations, aiming at assessing the effect of the main influential parameters on the seismic response of the structure. The obtained results show that the contribution provided by aluminium SPs is rather significant, allowing a remarkable improvement of the seismic performance of the structure in terms of stiffness, strength and ductility, with the possibility to strongly limit the damage occurring in the members of moment‐resisting frames. In particular, it is clearly emphasized that the stiffening effect provided by SPs allows a more rational design procedure to be adopted, since the serviceability limit state check does not lead to unavoidable and uneconomical increase of the size of main structural members. Copyright © 2007 John Wiley & Sons, Ltd.     

Towards error‐free hybrid simulation using mixed variables

Two procedures are developed and implemented in a hybrid simulation system (HSS) with the aim of enhancing the accuracy and reliability of the online, i.e. pseudo‐dynamic, test results. The first procedure aims at correcting the experimental systematic error in executing the displacement command signal. The error is calculated as the difference between command and feedback signals and correlated to the actuator velocity using the least‐squares method. A feed‐forward error compensation scheme is devised leading to a more accurate execution of the test. The second procedure employs mixed variables with mode switching between displacement and force controls. The newly derived force control algorithm is evaluated using a parametric study to assess its stability and accuracy. The implementation of the mixed variables procedure is designed to adopt force control for high stiffness states of the structural response and displacement control otherwise, where the resolution of the involved instruments may favour this type of mixed control. A simple pseudo‐dynamic experiment of steel cantilever members is used to validate the HSS. Moreover, two experiments as application examples for the two developed procedures are presented. The two experiments focus on the seismic response of (a) timber shear walls and (b) reinforced concrete frames with and without unreinforced masonry infill wall. Copyright © 2007 John Wiley & Sons, Ltd.     

Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

基于数字摄影的钢结构变形监测系统研究

讨论了基于数字摄影的钢结构变形监测系统研究所解决的主要问题，提出了相应的解决方法，并论述了整个系统的流程。     

圆钢管混凝土压弯构件荷载一位移滞回性能分析

在空钢管中填充混凝土可以避免或延缓钢管过早地发生局部屈曲，并有效地提高构件的延性，从而增强构件的抗震性能，本文在对圆钢管混凝土构件弯矩－曲率关系分析的基础上，分析了圆钢管混凝土压弯构件P－△滞回关系曲线，理论计算结果得到国内外大量结果的验证，基于理论分析模型，分析了各参，如构件轴压比，长细比，截面含钢率和材料强度等因素对圆钢管混凝土压变变构件P－△滞回关系曲线的影响，最后，确定了圆钢管混凝土压弯构件P－△恢复力学模型和延性系数的简化计算方法。     

关于吉林地区挖孔桩设计问题的探讨

探讨了在吉林地区高层建筑中有关桩基规范执行及设计施工过程中常见的问题。通过对不同直径的桩端进入持力层深度的对比 ,明确 2d与 4d的对比要求 ,即持力层厚度的保证比进入持力层深度更重要。针对通长配筋“一通到底”的设计给施工带来的不便及浪费提出了新的建议。通过实践给出“α”角的建议值 ,既能减小扩大桩头斜面上受到卸荷后侧土压力 ,又可减少施工时的坍方。最后对降水及护壁提出了结合实际地质情况的 4种方法。     

Gyrolithes:边缘海沉积的特征遗迹化石

Gyrolithes为螺旋形垂直居住潜穴,是具成对附肢的两侧对称甲壳类所建造,出现在近海泻湖和河口湾等边缘海和极浅海环境中,常与半咸水条件有关。塔里木盆地塔中地区诸多钻井的下志留统塔塔埃尔塔格组上部大量发育有此类潜穴,在局部层位可形成强烈的扰动构造。伴生的遗迹化石很少,只有极个别的Beaconites。根据沉积学、地球化学和古生态学特征,这类潜穴形成在半咸水的泻湖环境中。这类潜穴外壁基本平直,在泥质沉积物中掘穴深度大而不变形,而且其充填物与围岩完全不同,这些特点表明Gyrolithes为固底控制的遗迹化石。