An integrated macroelement formulation for the dynamic response of inelastic deformable rocking bodies

This paper presents a macroelement formulation for the prediction of the planar dynamic response of inelastic deformable rocking bodies. The formulation is based on a previous macroelement developed by the authors able to describe the cyclic response of inelastic rocking bodies, which takes into account the deformability both along the height of the member, as well as near the rocking end. Modifications of this formulation to account for other motion modes of rocking members during their dynamic response, namely, sliding and upthrow, as well as modifications to account for damping in a uniform manner during the whole motion, including impacts, are introduced. The dynamic response predicted by the macroelement for free-standing rigid and deformable rocking bodies is presented and compared with existing theoretical solutions, and the effect of deformability, damping, inelasticity, and friction on the response is discussed.     

三种高程传递方法的精度分析

通过试验对悬挂钢尺、GPS测高和全站仪垂直测高三种高程传递方法进行了理论分析与精度比较,并讨论了各种方法在实际应用中的优点与局限性。     

铰接隅撑钢框架抗震性能研究

传统抗弯钢框架的梁柱节点通常设计为刚性连接,这种刚性节点具有很大的抗弯刚度,然而节点延性不足,罕遇地震作用导致节点脆性断裂.研究学者提出了多种解决该问题的思路,例如半刚性连接节点、节点加强或削弱方法使塑性铰外移等.本文提出了一种简化的梁柱节点连接方式-铰接连接,改变梁柱节点的传力方式,在节点处设置隅撑提供框架的抗侧刚度...     

Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology

This research investigates the seismic design method and the cyclic inelastic behavior of the bottom column, also called the vertical boundary element (VBE), in steel plate shear walls (SPSWs). This study consists of two parts. This Part 1 paper discusses the anticipated pushover responses for properly designed SPSWs and the possible inelastic responses of the bottom VBE at various levels of inter‐story drift. Considering both the tension field action of the infill panel and the sway action of the boundary frame, this study develops a simplified method to compute the flexural and shear demands in the bottom VBE. Based on the superposition method, this approach considers various plastic hinge forming locations at different levels of inter‐story drift. One of the key performance‐based design objectives is to ensure that the top ends of the bottom VBEs remain elastic when the SPSWs are subjected to the maximum considered earthquake. This paper presents the comprehensive design procedures for the bottom VBE. Furthermore, this study conducted cyclic performance evaluation tests of three full‐scale two‐story SPSWs at the Taiwan National Center for Research on Earthquake Engineering in 2011 to validate the effectiveness of the proposed design methods. The experimental program, cyclic inelastic responses of the SPSWs and bottom VBEs, and numerical simulations are presented in Part 2. Copyright © 2014 John Wiley & Sons, Ltd.     

受控定向钻进技术在福建马坑矿区的应用

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。     

应力分散型预应力抗拔桩系列技术研究与应用

根据目前国内外预应力抗拔抗浮桩、部分粘结预应力抗拔抗浮桩的优缺点以及使用的局限性——长螺旋钻机对于桩径＞800 mm或桩长＞30 m的桩力不从心,研究了应力分散型预应力抗拔桩及钢筋钢绞线笼系列技术,用于一个直径1 m、桩长60 m的抗拔桩工程,采用旋挖成孔,可实现在工程桩上进行大吨位试桩,受力合理,节省资金和工期,实践证明该系列技术有很好的应用前景。     

大跨度斜拉桥钢塔施工阶段制振用TMD、TLD装置及其性能试验

本文以南京长江第三大桥为例,研制了用于钢塔施工阶段涡激振动响应制振的制振器TMD和TLD。对制振装置以及其所采用的一些关键技术进行了说明。通过振动台试验测试了制振器的动力特性。根据试验结果,对TMD的工作性能,即装置的频率特性、阻尼特性、起动时所需的外激励水平及装置的框架刚度等,进行了评价分析;对TLD实现了其阻尼方案的优化,并确定了其工作时的阻尼隔栅状态。确认了制作完成的制振器具有良好的工作性能。     

皖南山区钢管砼拱桥施工技术

铜管砼拱桥在皖南山区受到应用限制的主要因素是钢管加工困难,构件运输的自然环境条件差,大型预制构件不易到达桥位处,加之某些区域的环境因素影响,使钢管砼拱桥施工,养护和维修成为主要问题.文章主要叙述了钢管砼拱桥的几种施工方法,对各种施工方法的适用条件及技术要点进行了分析,供同行参考.     

EFFECT OF SULPHATE-REDUCING BACTERIA ON ELECTRO-CHEMICAL CORROSION BEHAVIOR OF 16Mn STEEL IN SEA MUD

ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｗａｓｇｅｎｅｒａｌｌｙｃｏｎｓｉｄｅｒｅｄｐｒｅｖｉｏｕｓｌｙｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｏｆｓｔｅｅｌｉｎｓｅａｍｕｄｗａｓｎｏｔｓｅｒｉｏｕｓ.Ｈｏｗｅｖｅｒ,ｉｔｗａｓｌａｔｅｒｆｏｕｎｄｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒａｔｅｏｆｓｔｅｅｌｉｎｓｏｍｅｓｅａｍｕｄｗａｓｈｉｇｈｅｒｔｈａｎｔｈａｔｉｎｓｅａｗａｔｅｒ(Ｋｉｎｇ,1980;Ｓｅｈｍｉｄｅ,1982;Ｇｕｏｅｔａｌ.,1997;Ｈｏｕ,1998).Ｔｈｅｒｅａｒｅｓｏｍｅｒｅｐｏｒｔｓｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒ…