南汽试车跑道精密施工测量

介绍采用微型短边线形三角控制网、强制归心技术、独立前方交会成功的、高质量、高精度、高效益完成南汽试车跑道精密施工测量，希望能为类似工程测量提供一定的参考。(摘要修改)     

GPS静态定位技术在滆湖公路大桥测量中的应用

介绍了利用全球定位系统(GPS)静态定位技术，如何为滆湖公路大桥建立控制网，延伸出时控制网平差方案的确立上，以及如何使控制网中的成果与公路主线控制网中的成果互相兼容，从而为工程的设计与施工提供必要的控制资料。     

三峡库区滑坡治理工程设计中推力荷载计算方法初探

随着三峡水利工程的逐步实施，淹没区移民及新城镇建设等人类工程活动的加剧，以滑坡为主的环境地质问题日益突出。本文从稳定系数、安全系数入手，对铁道、公路等部门常用的设计计算原理进行了研究，并由此类比分析研究了三峡区回水后或库水位正常运行条件下，滑坡治理工程设计计算方法。     

三峡工程库区巴东县赵树岭滑坡稳定性与防治对策研究

赵树岭滑坡是三峡工程库区的重要滑坡，其稳定性直接关系到巴东新县城沿江大道的安全，并对新县城土地利用意义重大。在阐述赵树岭滑坡基本特征的基础上，运用水岩耦合三维有限元数值方法模拟了滑坡稳定性，预测了三峡水库蓄水后滑坡稳定性发展趋势和渗流特征。研究表明，水库蓄水及水位波动是影响滑坡稳定性的主要因素，三峡水库蓄水后，滑坡将发生局部失稳，必须加以治理，提出了滑坡防治的原则与对策。     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

农牧交错带典型区农业与牧业用地互动关系研究

利用1989年和2000年的两期Landsat-TM数据和相关的统计资料以及气候数据，应用转移距阵和多元回归分析等研究方法，对地处典型农牧交错带地区的兴和县土地利用变化进行研究，结果表明：农田和草地是研究区域中最主要的土地利用类型，Landsat-TM卫星影像数据和统计数据比较一致地反映农田和草地面积的变化；农田和草地的相互转换率在各种用地相互转化中非常剧烈；农业与牧业用地的互动特征具有明显的区域差异；农业和牧业用地的互动特点是自然因素和社会经济因素同时影响的结果。     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

To afforest the desert with the technology of peat composed of rotten mosses and the sustainable development of the oases

Only by providing the good conditions for the growth of plants can a favorable ecologicalenvironment on which human beings rely for existence be created. The upside-down-T dou-ble-layer water-conserving afforestation way is developed according to the situation of the short-age of water resources, low soil fertility and vast land in the arid areas. The characteristics of theafforestation way are to change the microenvironment in the root area of the plants, provide thefavorable conditions for the growth of plants, and reduce the necessary conditions for the growth ofplants in large areas in the arid regions. Meanwhile, the size of its water-conserving layer can bechanged according to the size of the planted trees. The different ways of the bottom wa-ter-conserving layer can be used according to the requirements. The afforestation way is suitablefor planting trees on a small scale and also for afforesting on a large scale under the adverse cir-cumstances in the arid areas, and has been effectively used in the afforestation in the hinterland ofTaklamakan Desert and the southern marginal zone of Gurbantonggut Desert. The prospects ofthe afforestation way are broad in afforestation and desertification control in the desert regions.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.