深井旋转轴套流场的CFD模拟

旋转轴套在超深井工作时,其井下流动是三维湍流流动,旋转轴套的旋转和表面曲率效应以及随之而来的哥氏力和离心力,使流场在超深井的流动中极其复杂,同时,由于流体介质泥浆属于液固两相流,更致使内部流场测试困难,而且超深井中的工况在使用常规方法已很难得到较准确的数据。为此,将计算流体力学软件Fluent应用于超深井下流场的模拟,基于Navier-Stokes方程和Reynolds应力方程模型,建立多种仿真模型,在相同条件下,使用CFD仿真软件Fluent模拟仿真的不同结果,优化与旋转轴套叶片设计相关的几何参数,提高     

Numerical study of the motions and drift force of a floating OWC device

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.     

Spectral Analysis of Nonlinear Drag Forces

The spectral properties of nonlinear drag forces of random waves on vertical circular cylinders are analyzed in this paper by means of nonlinear spectral analysis. The analysis provides basic parameters for estimation of the characteristic drag forces. Numerical computation is also performed for the investigation of the effects of nonlinearity of the drag forces.The results indicate that the wave drag forces calculated by linear wave theory are larger than those calculated by the third order Stokes wave theory for given waves. The difference between them increases with wave height. The wave drag forces calculated by use of hnear approximation are about 5% smaller than their actual values when measured in the peak values of spectral densities. This will result in a safety problem for the design of offshore structures. Therefore, the nonlinear effect of wave drag forces should be taken into comidemtion in design and application of important offshore structures.     

The optimum control of thruster system for dynamically positioned vessels

An offshore vessel with a dynamic positioning system (DP system) needs fast response to produce thrust to counteract the environmental forces acting on it for the purpose of maintaining its position and heading as close as possible to the working position. Therefore, quick and effective modulation of the thrust is the problem to determine the thrust and the rotation angle of the thruster devices of the ship. This paper presents an effective optimum control for a thruster system, using the sequential quadratic method to achieve economical and effective modulation of the thrust and the direction of the thruster. An optimum control study of a 2280 tons DP coring vessel with five rotary azimuth thruster marine positioning is studied in detail, which can quickly and exactly estimate the thrusts and angles of direction of all the thrusters. The results can provide a valuable thruster system for a dynamically positioned vessel.     

Neural Network-Based Active Control for Offshore Platforms

1 .IntroductionWiththedevelopmentofoceantechnology ,moreandmoreextremelylargeandlongflexibleoff shoreplatformsusedforoilexplorationanddrillingoperationarebuiltinhostileoceanenvironments .Ingeneral,thiskindofplatformsisanonlineardistributedparametersystemanditsnaturalfrequencyfallsclosertothedominantwavefrequencieswiththeincreaseofwaterdepth .Besides ,itsstructureisverycomplexandtheexternalwaveforceontheplatformisuncertain .Thus ,theseplatformsarepronetoexcessivewave inducedoscillationsunderbot…     

基于EOF分析对南海西北海域水体光谱特性的研究

This study presents an analysis of the spectral characteristics of remote sensing reflectance(R_(rs)) in northwestern South China Sea based on the in situ optical and water quality data for August 2018.R_(rs)was initially divided into four classes,classes A to D,using the max-classification algorithm,and the spectral properties of whole R_(rs) were characterized using the empirical orthogonal function(EOF) analysis.Subsequently,the dominant factors in each EOF mode were determined.The results indicated that more than 95% of the variances of R_(rs) are partly driven by the back-scattering characteristics of the suspended matter.The initial two EOF modes were well correlated with the total suspended matter and back-scattering coefficient.Furthermore,the first EOF modes of the four classes of R_(rs)(A-D R_(rs)-EOF_1) significantly contributed to the total variances of each R_(rs) class.In addition,the correlation coefficients between the amplitude factors of class A-D R_(rs)-EOF_1 and the variances of the relevant water quality and optical parameters were better than those of the unclassified ones.The spectral shape of class AR_(rs)-EOF_1 was governed by the absorption characteristic of chlorophyll a and colored dissolved organic matter(CDOM).The spectral shape of class B R_(rs)-EOF_1 was governed by the absorption characteristic of CDOM since it exhibited a high correlation with the absorption coefficient of CDOM(a_g(λ)),whereas the spectral shape of class C R_(rs)-EOF_1 was governed by the back-scattering characteristics but not affected by the suspended matter.The spectral shape of class D R_(rs)-EOF_1 exhibited a relatively good correlation with all the water quality parameters,which played a significant role in deciding its spectral shape.     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.