垫层对CFG桩复合地基影响的分析

对CFG桩复合地基垫层进行分析 ,探讨了垫层厚度和模量对桩土应力比、桩侧摩阻力、沉降变形、承载力的影响 ,并得出一些规律     

An invariance in the carbazoles of petroleum

A remarkable invariance in the ratio of 1,3-dimethylcarbazole （DMC） to 1,6-DMC was discovered in crude oils from the Pearl River Mouth Basin, South China Sea. The remarkably invariant ratio is kept at a constant of about unity regardless of their concentrations, sources or maturities for the sampies. In combination with the molecular structures of 1,3- and 1,6-DMCs, the invariance might indicate that the nitrogen compounds share a common precursor with a skeleton of 1-methylcarbazole and are formed through methylation at C3 and C6 with an essentially identical rate.     

Geologic and geotechnical effects of an impact caused by an airplane crash

A Turkish Airlines (THY) Boeing 737-400 plane crashed into alluvial soils creating an approximately 13 m deep and 30 m wide crater near the village of Adatepe, Ceyhan in southern Turkey. Effects of the impact on the soils in and around the crater were investigated from both the geological and soil mechanics point of view.

The results show that the impact caused severe deformations in the soils in and around the crater. The soils deformed similar to metamorphic rocks seen at many terrestrial hypervelocity impact craters around the world and became overconsolidated up to a distance of about 10 m from the crater wall as a result of the impact.

Also, the crash was recorded as a 2.7 magnitude earthquake by a nearby microtremor seismograph which provided both the location (epicenter) and time of the crash which was not known immediately after the crash.     

用叠加谱比法研究新疆地区Lg尾波Q值的区域性变化

运用叠加谱比法,对分布于新疆地区的5个台站所记录的51个地震数据进行分析,得出与各射线路径相对应的Lg尾波Q0(Lg尾波在1Hz处的Q)值。结果表明:Q0值呈现出明显的区域性变化特点,与构造活动关系紧密。在较为稳定的塔里木地台,Q0呈现出高值,在350～450之间。在南部构造活动较为激烈的昆仑褶皱系,Q0呈现出较低的值,约为200～250。在构造活动最为激烈的帕米尔地区,Q0值在170～200之间。在北部的天山褶皱系,Q0值约为220～270。准葛尔褶皱系比天山褶皱系的Q0值略高,约为260～290。     

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses.     

Semi‐analytical solution to one‐dimensional consolidation for unsaturated soils with semi‐permeable drainage boundary under time‐dependent loading

This paper presents semi‐analytical solutions to Fredlund and Hasan's one‐dimensional consolidation of unsaturated soils with semi‐permeable drainage boundary under time‐dependent loadings. Two variables are introduced to transform two coupled governing equations of pore‐water and pore‐air pressures into an equivalent set of partial differential equations, which are easily solved by the Laplace transform. The pore‐water pressure, pore‐air pressure and settlement are obtained in the Laplace domain. Crump's method is adopted to perform the inverse Laplace transform in order to obtain semi‐analytical solutions in time domain. It is shown that the present solutions are more general and have a good agreement with the existing solutions from literatures. Furthermore, the current solutions can also be degenerated into conventional solutions to one‐dimensional consolidation of unsaturated soils with homogeneous boundaries. Finally, several numerical examples are provided to illustrate consolidation behavior of unsaturated soils under four types of time‐dependent loadings, including instantaneous loading, ramp loading, exponential loading and sinusoidal loading. Parametric studies are illustrated by variations of pore‐air pressure, pore‐water pressure and settlement at different values of the ratio of air–water permeability coefficient, depth and loading parameters. Copyright © 2017 John Wiley & Sons, Ltd.     

Analytical modeling on consolidation of stiffened deep mixed column-reinforced soft soil under embankment

Stiffened deep mixed (SDM) column is a new ground improvement technique to improve soft soil, which can be used to increase bearing capacity, reduce deformation, and enhance stability of soft soil. This technique has been successfully adopted to support the highway and railway embankments over soft soils in China and other countries. However, there have been limited investigations on its consolidation under embankment loading. This paper developed an analytical solution for the consolidation of embankment over soft soil with SDM column in which core pile is equal to or shorter than outer DM column. The consolidation problem was simplified as a consolidation of composite soil considering the load shear effect of core pile. The developed solution was verified by a comparison with the results computed by three-dimensional (3-D) finite element analysis. A parametric study based on the derived solution was conducted to investigate influence factors—length of core pile, diameter of core pile, diameter of SDM column, modulus of DM column, and permeability coefficient of DM column—on the consolidation behavior of SDM column-supported embankment over soft soil. The developed solution was applied to a case history of SDM column-supported embankment, and a good agreement was found between the predictions and the field measurements.     

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.     

A bounding surface model for anisotropically overconsolidated clay incorporating thermodynamics admissible rotational hardening rule

A bounding surface model is formulated to simulate the behavior of clays that are subject to an anisotropic consolidation stress history. Conventional rotational hardening is revisited from the perspective of thermodynamics. As the free energy cannot be accumulated infinitely upon critical state failure, the deviatoric back stress must vanish. This requires the rotated yield surface to be turned back to eventually align on the hydrostatic axis in the stress plane. Noting that most of the previous propositions violate this restriction, an innovative rotational hardening rule is formulated that is thermodynamically admissible. The bounding surface framework that employs the modified yield surface is applied to simulate elastoplastic deformations for overconsolidated clays, with which the overprediction of strength on the “dry” side can be greatly improved with reasonable results. Other important features, including contractive or dilative response and hardening or softening behavior, can also be well-captured. It has been shown that the model can simulate three types of reconstituted clays that are sheared with initial conditions over a wide range of anisotropic consolidation stress ratios and overconsolidation ratios under both triaxial undrained and drained conditions. Limitations and potential improvement of the model regarding the fabric anisotropy at critical state have been discussed.