Shake table testing of un‐reinforced brick masonry building test model isolated by U‐FREI

This paper presents a detailed study on feasibility of un‐bonded fiber reinforced elastomeric isolator (U‐FREI) as an alternative to steel reinforced elastomeric isolator (SREI) for seismic isolation of un‐reinforced masonry buildings. Un‐reinforced masonry buildings are inherently vulnerable under seismic excitation, and U‐FREIs are used for seismic isolation of such buildings in the present study. Shake table testing of a base isolated two storey un‐reinforced masonry building model subjected to four prescribed input excitations is carried out to ascertain its effectiveness in controlling seismic response. To compare the performance of U‐FREI, same building is placed directly on the shake table without isolator, and fixed base (FB) condition is simulated by restraining the base of the building with the shake table. Dynamic response characteristic of base isolated (BI) masonry building subjected to different intensities of input earthquakes is compared with the response of the same building without base isolation system. Acceleration response amplification and peak response values of test model with and without base isolation system are compared for different intensities of table acceleration. Distribution of shear forces and moment along the height of the structure and response time histories indicates significant reduction of dynamic responses of the structure with U‐FREI system. This study clearly demonstrates the improved seismic performance of un‐reinforced masonry building model supported on U‐FREIs under the action of considered ground motions. Copyright © 2015 John Wiley & Sons, Ltd.     

Force–displacement response of in‐plane‐loaded URM walls with a dominating flexural mode

This article presents a new mechanical model for the non‐linear force–displacement response of unreinforced masonry (URM) walls developing a flexural rocking mode including their displacement capacity. The model is based on the plane‐section hypothesis and a constitutive law for the masonry with zero tensile strength and linear elastic behaviour in compression. It is assumed that only the compressed part of the wall contributes to the stiffness of the wall and therefore the model accounts for a softening of the response due the reduction of the effective area. Stress conditions for limit states are proposed that characterise the flexural failure. The new model allows therefore linking local performance levels to global displacement capacities. The limit states criteria describe the behaviour of modern URM walls with cement mortar of normal thickness and clay bricks. The model is validated through comparison of local and global engineering demand parameters with experimental results. It provides good prediction of the effective stiffness, the force capacity and the displacement capacity of URM walls at different limit states. Copyright © 2015 John Wiley & Sons, Ltd.     

松散承压含水层水文地质参数分区及水流场数值模拟

为了揭示华北型煤田松散承压含水层水文地质参数及其对地下水流数值模拟的意义,以安徽淮北煤田宿南矿区祁东煤矿松散层承压第四含水层(简称“四含”)为研究示范,对多个影响因素综合分析,采用层次分析-模糊综合评价法,对研究区四含水文地质参数进行分区,合理确定各分区的水文地质参数,并用于采煤情景下地下水流动态数值模拟。数值模拟结果表明：祁东煤矿2008-2012年浅部煤层开采过程中四含地下水流场没有明显改变,但南北分区水头差逐年增大,地下水流向始终从南向北,而且在井田北部水力梯度逐渐减小,在井田南部水力梯度逐渐增大,南北区以倾角为60°~70°、断距为10~320 m的魏庙断层为分界线,基岩中大倾角与大落差断层的出现是引起上覆松散承压含水层水力梯度异常的根本原因。     

A framework for the seismic assessment of existing masonry buildings accounting for different sources of uncertainty

The current formulation of Eurocode 8 Part 3 and the Italian building code for the seismic assessment of existing buildings accounts for epistemic (knowledge‐based) uncertainties by means of the identification of knowledge levels with associated values of the so‐called confidence factors, applied only as a reduction of material strengths. This formulation does not always produce consistent results and it does not explicitly account for other sources of uncertainty. The paper proposes a probabilistic methodology for the quantification of appropriately defined factors, allowing consideration of the different sources of uncertainty involved in the seismic assessment of masonry buildings by means of nonlinear static analyses. This simple approach, also including an alternative formulation of the confidence factors related with material properties, allows to obtain results which are consistent with the acquired level of knowledge and correctly account for the different sources of uncertainty without requiring to carry out any stochastic nonlinear analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Bidirectional behavior of unreinforced masonry walls

Most of the studies related to the modeling of masonry structures have by far investigated either the in‐plane (IP) or the out‐of‐plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load‐bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement‐controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the results of the tests on walls with different failure modes conducted by the authors. Afterward, the response of the wall systems is evaluated with increasing top displacement having different orientations. A set of 19 monotonic and three cyclic loading analyses are performed, and the results are discussed in terms of the variation of failure modes and load–displacement diagrams. Moreover, the results of wall capacity in each loading condition are compared with those of the ASCE41‐06 formulations. The results indicate that the direction of the resultant force, vectorial summation of IP and OP forces, of the wall is initially proportional to the ratio of stiffness in the IP and the OP directions. However, with the increase of damage, the resultant force direction inclines towards the wall's longitudinal direction regardless of the direction of the imposed displacement. Finally, recommendations are made for applicability of ASCE41‐06 formulations under different bidirectional loading conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

钢管约束混凝土压弯构件滞回性能的实验研究

进行了12个钢管约束混凝土压弯构件在往复荷载作用下的荷载-变形滞回性能的实验研究,包括6个圆试件和6个方试件。考察的主要参数是构件的轴压比。通过实验观察了这类构件在往复荷载作用下的破坏模态并分析了其荷载-变形滞回曲线的特点以及刚度退化规律,同时对钢管约束混凝土压弯构件极限承载力和抗弯刚度计算方法进行了初步探讨。     

��ѹ����dz�ѹ��ˮλ��ϫЧӦ���䶨������

???????????????λ????Ч??????????????????????????     

Shake‐table tests of a three‐story reinforced concrete frame with masonry infill walls

This paper presents the shake‐table tests of a 2/3‐scale, three‐story, two‐bay, reinforced concrete frame infilled with unreinforced masonry walls. The specimen is representative of the construction practice in California in the 1920s. The reinforced concrete frame had nonductile reinforcement details and it was infilled with solid masonry walls in one bay and infill walls with window openings in the other bay. The structure was subjected to a sequence of dynamic tests including white‐noise base excitations and 14 scaled historical earthquake ground motion records of increasing intensity. The performance of the structure was satisfactory considering the seismic loads it was subjected to. The paper summarizes the design of the specimen and the major findings from the shake‐table tests, including the dynamic response, the load resistance, the evolution of damage, and the final failure mechanism. Copyright © 2011 John Wiley & Sons, Ltd.     

Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.     

带竖向构造钢筋再生混凝土砖结构振动台试验研究

提出了带竖向构造钢筋再生混凝土砖砌体结构,进行了2个两层再生混凝土砖砌体房屋结构1/2缩尺模型的模拟地震振动台试验研究,2个结构模型的墙体厚度均为120 mm,一层设有门洞和窗洞,二层设有窗洞。2个模型中,1个为带竖向构造钢筋再生混凝土砖砌体房屋,1个为普通无竖向构造钢筋再生混凝土砖砌体房屋。试验中输入El Centro地震动,测试分析了台面加速度反应、一层和二层顶板加速度反应、结构层间位移反应以及各阶段结构损伤与破坏特征等。研究表明:带竖向构造钢筋再生混凝土砖砌体房屋比普通再生混凝土砖砌体房屋的破坏程度轻,墙体裂缝位置相对错动小,抗震性能显著提高;带竖向构造钢筋再生混凝土砖砌体房屋可用于地震区村镇建筑。