A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.     

Generalized Coarse Graining Procedures for Flow in Porous Media

This paper focuses on heterogeneous soil conductivities and on the impact their resolution has on a solution of the piezometric head equation: owing to spatial variations of the conductivity, the flow properties at larger scales differ from those found for experiments performed at smaller scales. The method of coarse graining is proposed in order to upscale the piezometric head equation on arbitrary intermediate scales. At intermediate scales large scale fluctuations of the conductivities are resolved, whereas small scale fluctuations are smoothed by a partialy spatial filtering procedure. The filtering procedure is performed in Fourier space with the aid of a low-frequency cut-off function. We derive the partially upscaled head equations. In these equations, the impact of the small scale variability is modeled by scale dependent effective conductivities which are determined by additional differential equations. Explicit results for the scale dependent conductivity values are presented in lowest order perturbation theory. The perturbation theory contributions are summed up with using a renormalisation group analysis yielding explicit results for the effective conductivity in isotropic media. Therefore, the results are also valid for highly heterogeneous media. The results are compared with numerical simulations performed by Dykaar and Kitanidis (1992). The method of coarse graining combined by a renormalisation group analysis offers a tool to derive exact and explicit expressions for resolution dependent conductivity values. It is, e.g., relevant for the interpretation of measurement data on different scales and for reduction of grid-block resolution in numerical modeling. This revised version was published online in July 2006 with corrections to the Cover Date.     

协同空间决策的概念、过程与特点研究

对空间决策支持系统和计算机系统协同工作环境进行系统分析和总结，概括了较为完整的协同空间决策概念，提出了协同空间决策的空间问题协同分析、方案生成与可视化、方案分析、方案表决等基本过程。在此基础上，作者详细分析了协同空间决策的复杂性、交互可视化、多用户参与、方案探索性分析、多层次协同等基本特征。     

CT长骨测量在骨折髓内钉固定术中的应用

目的：探讨CT在长骨测量中的应用价值.方法：经X线检查证实的肱骨、股骨、胫骨骨折患者600多例，其中302例临床行髓内钉固定术，并在术前进行了健侧骨的CT定位扫描，测量其两点之间骨干长度及骨髓腔最窄处的宽度。结果 依据术前CT定位测量数据而选择的髓内钉在手术中完全适用。结论：此方法操作简便测量数据准确为临床提供可靠依据。     

A Case Study Of An On-Ice Air Flow Over The Arctic Marginal Sea-Ice Zone

A case study of warm air advection over the Arctic marginalsea-ice zone is presented, based on aircraft observations with direct flux measurements carriedout in early spring, 1998. A shallow atmospheric boundary layer (ABL) was observed, which wasgradually cooling with distance downwind of the ice edge. This process was mainly connected with astrong stable stratification and downward turbulent heat fluxes of about 10–20 W m^-2, but wasalso due to radiative cooling. Two mesoscale models, one hydrostatic and the other non-hydrostatic,having different turbulence closures, were applied. Despite these fundamental differences betweenthe models, the results of both agreed well with the observed data. Various closure assumptions had amore crucial influence on the results than the differences between the models.Such an assumption was, for example,the parameterization of the surface roughness for momentum (z₀) and heat (z_T). This stronglyaffected the wind and temperature fields not only close to the surface but also within and abovethe temperature inversion layer. The best results were achieved using a formulation for z₀ that took intoaccount the form drag effect of sea-ice ridges together withz_T = 0.1z₀. The stability within theelevated inversion strongly depended on the minimum eddy diffusivity K_min. A simple ad hocparameterization seems applicable, where K_min is calculated as 0.005 timesthe neutral eddy diffusivity. Although the longwave radiative cooling was largest within the ABL, theapplication of a radiation scheme was less important there than above the ABL. This was related to theinteraction of the turbulent and radiative fluxes. To reproduce the strong inversion, it wasnecessary to use vertical and horizontal resolutions higher than those applied in most regional andlarge-scale atmospheric models.     

Modelling of the OASIS Energy Flux Measurements Using Two Canopy Concepts

Two land surface schemes, SCAM and CSIRO9, were used to model the measured energy fluxes during the OASIS (Observations At Several Interacting Scales) field program. The measurements were taken at six sites along a 100 km rainfall gradient. Two types of simulations were conducted: (1) offline simulations forced with measured atmospheric input data at each of the six sites, and (2) regional simulations with the two land surface schemes coupled to the regional climate model DARLAM.The two land surface schemes employ two different canopy modelling concepts: in SCAM the vegetation is conceptually above the ground surface, while CSIRO9 employs the more commonly used `horizontally tiled' approach in which the vegetation cover is modelled by conceptually placing it beside bare ground. Both schemes utilize the same below-ground components (soil hydrological and thermal models) to reduce the comparison to canopy processes only. However, the ground heat flux, soil evaporation and evapotranspiration are parameterised by the two canopy treatments somewhat differently.Both canopy concepts reproduce the measured energy fluxes. SCAM has a slightly higher root-mean standard error in the model-measurement comparison for the ground heat flux. The mean surface radiative temperature simulated by SCAM is approximately 1K lower than in the CSIRO9 simulations. However, the soil and vegetation temperatures (which contribute to the radiative temperature) varied more in the CSIRO9 simulations. These larger variations are due to the absence of a representation of the aerodynamic interactions between vegetation and ground.     

开发PC─E500汉化软件

本文介绍了SHARPPCE500计算机汉化软件的编制，提供了一种较好的汉字库获取方法。     

矢量电子地图的线目标在线简化

为了适应实时ＧＩＳ的变比例尺显示与网络ＧＩＳ的快速矢量数据传输，提出了数字地图的在线综合概念，讨论了对线目标的在线简化算法。提出的两个在线简化算法都是对ＤＰ简化算法进行改造，使算法对时间的复杂度从θ（ｎ）～θ（ｎ２）的乘法运算改进为θ（１）～θ（ｎ）的赋值运算，并讨论了减少算法所涉及的空间复杂度的可能性     

Fast space-domain evaluation of geodetic surface integrals

Geodetic surface integrals play an important role in the numerical solution of geodetic boundary-value problems. In many cases they can be evaluated using fast methods in the frequency domain (FFT). However, this is not possible in general, because the domain of integration may be non-trivial (as is the surface of the Earth), the kernel function may not be of convolution type, or the data distribution may be heterogeneous. Therefore, fast evaluation strategies are also required in the space domain. They are more difficult to design because only one property is left where a more or less fast evaluation strategy can be built upon: the potential type of the kernel function. Consequently, the idea is not to replace well-established frequency domain techniques, but to supplement them. Our approach to this problem goes in two directions: (1) we use advanced cubature methods where the integration nodes automatically densify in the vicinity of the evaluation points; (2) we use powerful computer hardware, namely MIMD computers with distributed memory. This enables us to evaluate geodetic surface integrals of any practical complexity in reasonable time and accuracy. This is shown in a numerical example. Received: 7 May 1996 / Accepted:17 March 1997     

农田土壤湿度的人工神经网络预测诊断系统

采用人工神经网络（ＡＮＮ）方法，研制了农田土壤湿度预测，诊断分析系统，该系统根据不同的土壤湿度特点和影响因子，可自动提供时间序列拓展的人工神经网络预测模型和人工神经网络的混合预测模型进行土壤湿度的动态预测。并提供不同降水量的土壤湿水分渗透深度诊断分析，系统采用中文菜单显示的人机对话方式操作，使具有准动力学特性，多种可调参数和网络结构的ＡＮＮ方法变得简便易于操作。实际使用表明，该系统对土壤湿度的预测