GRAPHER、Surfer32与CorelDRAW1O在物探成图中的应用

用GRAPHER、Surfer32软件作出给定数据的曲线图、平剖图、平面等值线图和立体曲面图后，再用CorelDRAW10来编辑，可快速做出一张满意而又少占存储空间的图件。     

三峡库区巫山新城超高加筋挡墙变形破坏及修复研究

结合三峡库区弃渣灾害的防治和回填增地,以巫山新城加筋土挡墙等实际工程为典型进行剖析,对加筋土挡墙,特别是超高加筋土挡墙变形破坏机制和过程进行了系统深入的研究。从加筋土挡墙填土物理力学性质室内试验研究入手,采用FLAC等数值计算方法,系统地研究了加筋土挡墙的应力状况和变形破坏特性。将离心模拟技术应用于超高多级加筋土挡墙(H=57m)的研究中,进行了三级加筋土挡墙的离心模型试验,对加筋土挡墙墙背土压力分布规律、挡墙面板和填土的沉降情况以及拉筋的拉力分布规律进行了详细而系统的研究。特别是精心设计出离心模型试验中三级挡墙的面板与拉筋的联结,较真实地反映了实际工程中加筋土挡墙整体复合结构的力学特性。根据研究结果,提出了巫山新城加筋土挡墙修复加固方案,编制了设计报告,并加以实施。目前,修复加固工程效果良好。　对库区,乃至全国超高加筋土挡墙的建设均有指导和示范作用。     

地球化学样品分析质量管理系统

利用VFP6．0强大的数据计算和管理功能，设计了对地质调查样品分析数据的实验室质量管理系统。该系统不仅可以同时管理多个图幅样品的数据，还可以自动实现样品编码、内检样品按指定比例随机生成、一级和二级标样质量汇总、内检合格率和报出率计算、二级标样质量监控图绘制以及按选定格式进行分析数据和内检数据的导入和导出，可以根据用户的需要输出美观的表格。该系统适用于不同比例尺化探数据的实验室质量管理。     

基于预测控制的结构振动半主动控制研究

建立了半主动控制系统的理论模型，分析了半主动控制机理，并结合现代控制理论，将预测控制应用于结构半主动控制中，提出了在线预测控制算法，建立了预测模型，并成功的解决了时滞问题，最后作了计算机仿真分析，证明该系统有较好的控制效果。将预测控制思想应用于结构半主动控制中，为结构控制注入了新的思路，通过研究及仿真分析也说明了这种思想是可行的并且具有很大的发展前途。     

Modelling of oxygen and nitrogen cycling as a function of macrophyte community in the Thau lagoon

A three-dimensional model coupling physical and biological processes for the whole Thau lagoon (Mediterranean coast of France) was developed in order to assess the relationships between macrophytes and the oxygen and nitrogen cycles. Ten species have been inserted as forcing variables in the model. Plankton dynamics, shellfish cultivation impact and mineralization of organic matter are also considered, as well as nutrient and oxygen exchanges between the sediment and the water column.Simulations with and without the macrophytes have shown that the system can be characterized as having a highly structured pattern involving lagoon nitrogen and oxygen cycles. This pattern is created by the combined influence of macrophytes, watershed and oyster farming.The model has been also used to assess the total annual macrophyte production at the whole lagoon scale. Comparisons with phytoplankton production and with results from other temperate lagoons have underlined the high productivity of the Thau lagoon supported by active nutrient regeneration.     

Nonlinear Rate Dependent Model of High Damping Rubber Bearing

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.     

Estimation of fundamental periods of shear‐wall dominant building structures

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Coupled inverse modelling of groundwater flow and mass transport and the worth of concentration data

This paper presents the extension of the self-calibrating method to the coupled inverse modelling of groundwater flow and mass transport. The method generates equally likely solutions to the inverse problem that display the variability as observed in the field and are not affected by a linearisation of the state equations. Conditioning to the state variables is measured by an objective function including, among others, the mismatch between the simulated and measured concentrations. Conditioning is achieved by minimising the objective function by gradient-based methods. The gradient contains the partial derivatives of the objective function with respect to: log conductivities, log storativities, prescribed heads at boundaries, retardation coefficients and mass sources. The derivatives of the objective function with respect to log conductivity are the most cumbersome and need the most CPU-time to be evaluated. For this reason, to compute this derivative only advective transport is considered. The gradient is calculated by the adjoint-state method. The method is demonstrated in a controlled, synthetic study, in which the worth of concentration data is analysed. It is shown that concentration data are essential to improve transport predictions and also help to improve aquifer characterisation and flow predictions, especially in the upstream part of the aquifer, even in the case that a considerable amount of other experimental data like conductivities and heads are available. Besides, conditioning to concentration data reduces the ensemble variances of estimated transmissivity, hydraulic head and concentration.