�����Ƚ��ֻ�������Bayes���Ʒ��ڵؿ��α�����е�Ӧ��

??????????????????α?????GPS???ι???????????α?????????????????????????????????????????????????????????????????????????в??????????????????????????????????????????α???????????????????ι????????????α???????????????????Ч?????????????????????????????????Bayes?????????????????α?????????????????????????????????????????????????????????????????????????????????????????????Щ???????????????????????????????????????????????????GPS????????м??????????????????????????Ч???????????????????????????????????????     

青海东昆仑哈陇休玛钼多金属矿床成矿流体特征及成矿模式

哈陇休玛钼多金属矿床是东昆仑成矿带东段目前仅有的中型斑岩型矿床。为了查明其成矿流体性质及成矿物质来源,构建矿床成矿模式,本文进行了详细的流体包裹体和H-O-S同位素研究。流体包裹体显微测温显示,哈陇休玛矿床发育气液两相和含CO₂三相两种类型包裹体,成矿流体呈现中高温(集中于280～340℃)、高盐度(w(NaCl),集中于6.00%～18.00%)和中等密度(集中于0.64～0.92 g/cm³)特点,成矿深度为2.4～4.1 km,形成于中浅成环境。H-O同位素显示,成矿流体具有岩浆水和大气降水混合的特征,但主体以岩浆水为主;S同位素显示,成矿物质主要来自于深部岩浆。结合区域构造演化认为,哈陇休玛矿床成矿模式为印支晚期东昆仑地区发生强烈壳幔混合作用,形成富含成矿元素的混合岩浆,含矿流体在随混合岩浆上升的过程中发生流体沸腾,并与大气降水混合冷却,导致成矿物理化学条件发生变化,促使成矿物质沉淀成矿。     

裂隙岩石介质中核素迁移的模型及其算子分裂、迎风、均衡格式

建立了放射性核素在裂隙岩石介质中迁移的双重介质模型,对模型的求解提出了一种新的数值方法—Galerkin有限元法与算子分裂、迎风、均衡格式相结合的新方法,给出了水质模型算子分裂、迎风、均衡格式的稳定性条件,且所得到的计算格式是非负的。最后通过对核素90Sr 100年、99Tc 1000年的预测计算,验证了本文所提方法的有效性和稳定性,并得出了一些有重要意义的结论。     

Anthropogenic relief changes in a long-lasting lignite mining area (‘Ville’, Germany) derived from historic maps and digital elevation models

Humans constitute one of the main geomorphological agents in modern times. As an example, post-mining regions represent a typical landscape of the Anthropocene. Strong relief modifications are particularly obvious with open pit mining. However, many existing mining areas are lacking detailed pre-mining information for the quantification of anthropogenic relief changes, which is a considerable challenge in regions with historic mining activities. Here, the Ville (Rhenish lignite district, Germany) is used to quantify surface mining induced relief changes in one of the oldest and currently largest lignite districts in Europe. Historical maps from first geodetic mapping in 1893 enabled construction of a historic digital elevation model to quantify the relief changes in comparison to elevation data from 2000 and 2015. The vertical accuracy of the historic data is remarkably high, with relief differences < 2 m in areas not affected by mining. In total, 49.2% of the investigated area (184 km²) shows a relief deficit and 14.5% has positive relief differences. Absolute changes account for more than 80 m heightening (dumpsites of overburden) and lowering of the natural relief (pits). Besides these altitudinal changes, overall steeper slopes are significant for the new topography, but levelling exists likewise. The spatial variabilities are discussed in the context of the regional geology and the mining techniques. Undoubtedly, such large-scale anthropogenic relief changes persist for a very long time and will last as a human legacy far into the future. Only the detailed reconstruction of the pre-mining relief offers the ability to clarify the dimension of humans as geomorphological agents and to understand landscape perception. Due to the fact that the impact of open pit mining has such a large vertical and horizontal extension, their consideration as part of anthropogeomorphology can significantly contribute to support future Critical Zone research in the Anthropocene.     

无人船运动控制方法综述

为实现无人船海上自主作业,无人船运动控制的快速性、准确性以及鲁棒性亟待提高。首先从全驱动控制和欠驱动控制角度,分别概括了国内外无人船航向控制、航速控制、轨迹跟踪控制以及路径跟踪控制的主流控制方法。其次,归纳总结了处理海洋环境不确定扰动的研究进展,包括扰动的建模和消除、抑制扰动的主流方法。最后,总结了无人船运动控制现状与存在的问题,并从工程应用和理论研究两个角度对未来的研究方向进行了展望。     

大型基坑工程水平位移监测与预测结果分析

以银川大世界商务广场的基坑为例,介绍了大型基坑工程水平位移监测的实施方案,给出了水平位移监测方法的精度,并对监测成果进行了分析。在此基础上,分别用多项式拟合和时间序列分析模型两种方法进行建模,对基坑水平位移进行预测,结果表明,该基坑水平位移较小,在规范规定的要求之内,说明基坑是稳定的;时间序列分析模型的预测精度要高于多项式拟合模型的精度。     

土水特征曲线(SWCC)的滞回特性模拟研究

为了模拟非饱和土的水力、力学特性在多次降雨、蒸发过程中的变化特性,本文以传统域模型的基本原理为基础,推到得到了一个能够模拟SWCC滞后性的计算模型,该模型计算方法简单,易于通过程序实现,且通过与试验数据和其他模型的计算结果对比,验证了该模型的合理性,同时,这个模型可为研究在复杂吸力变化状态下非饱和土的渗流特性、强度特性以及本构模型的研究打下一定的基础。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

Non-symmetrical levee breaching processes in a channel bend due to overtopping

A series of experiments were done to reveal the overtopping breaching process of non-cohesive and cohesive levees in a U-bend flume. The flood hydrograph and breaching geometry were measured and analyzed in detail. The results show that the levee breaching processes can be briefly divided into four stages: slope erosion, longitudinal headward gully-cutting, lateral erosion, and relative stabilization. For non-cohesive levees, non-symmetrical lateral development of the breach occurs throughout the four stages, and the final non-symmetrical coefficient is approximately 2.2–2.6. Larger flow discharge or higher water level can accelerate the breaching process, while coarser sands tend to accelerate the process initially but depress the process at the end. The fluvial erosion rate of a non-cohesive breach shows a power-function relation with the excess wall shear stress. For cohesive levees, a plateau forms in the breach partially blocking the flow in the first two stages. The breach flow is approximately perpendicular to the levee body, and, thus, the erosion rates of the two breach sides are almost the same. Non-symmetrical lateral development mainly occurs in the third stage when the deep gully forms. The final non-symmetrical coefficient is approximately 2.7–3.3. It is expected that these findings can provide a valuable experimental dataset and a theoretical basis for breach closure and flood alleviation.     

桶形基础沉贯室内模型试验研究

桶形基础采用负压沉贯法施工,其贯入阻力与压桩,打桩等施工方法显著不同。本文介绍了在粉土和粉质粘土地层中的一组模型试验情况,认为负压法施工可显著降低粉土的抗贯阻力,但在粉质粘土中减阻效果不明显。