Hydrodynamic effect of the regulation project of Yangtze River deepwater channel downstream of Nanjing

A two-dimensional flow numerical model of the tidal reaches, which total length is more than 700 km, is established from Datong to the Yangtze River estuary. The tidal levels, velocities, diversion ratios and dynamic axes before and after the separate regulation of each reach and combined regulation of all reaches are obtained. The comparative analysis shows that the regulation project of a separate reach basically has no impact on velocity distributions and variations of diversion ratios of upper and lower reaches, the variations of dynamic axes are only within the local scope of the project. The regulation project of a separate reach also has less impact on the water level in the lower adjacent reaches, but will make the water levels in the upper reaches rise. After the implementation of the regulation projects for all reaches, the rise of water level in the upstream reaches will have a cumulative impact.     

Eclogitization of the Monviso ophiolite (W. Alps) and implications on subduction dynamics

To constrain deep (40–100 km) subduction dynamics, extensive P–T data are provided on the eclogitic Monviso ophiolite derived from the subducted Liguro‐Piemontese oceanic lithosphere (which was exhumed, together with associated continental units, before the Alpine collision). The Monviso ophiolite has so far been interpreted either as a fossilized subduction channel, with tectonic blocks detached from the slab at different depths and gathered in a weak serpentinized matrix, or as a more or less continuous portion of oceanic lithosphere. To evaluate potential heterogeneities within and between the various subunits, extensive sampling was undertaken on metasedimentary rocks and Fe–Ti metagabbros. The results indicate that the Monviso ophiolite comprises two main coherent tectonic subunits (the Monviso and Lago Superiore Units) detached during subduction at different depths and later juxtaposed at epidote–blueschist facies during exhumation along the subduction interface. Raman spectroscopy of carbonaceous material suggests (i) a difference in peak temperature of ～50 °C between these two subunits and (ii) a good temperature homogeneity within each subunit. Pseudosections and average P–T estimates using thermocalc in the Lago Superiore Unit suggest for the first time homogeneous HP to UHP conditions (～550 °C, 26–27 kbar). Parageneses, peak conditions and tectonic setting are very similar to those of the Zermatt‐Saas ophiolite, 200 km northwards, thus suggesting a common detachment mechanism for the whole Western Alpine belt.     

Modelling flow resistance in vegetated streams: review and development of new theory

Aquatic macrophytes are often the dominant factor influencing flow conditions within the channels they occupy. Existing knowledge of how stream plants affect the flow is outlined, and the different scales at which vegetation resistance operates are proposed. Resistance is shown to be a function of the size of the plants, their structural properties, location in the channel, and the local flow conditions. Current models to calculate this composite resistance effect are assessed in the light of theoretical considerations of the nature of vegetation resistance. New theory is also presented, which demonstrates the non‐linear relationship between channel resistance and the proportion of the channel occupied by vegetation. Copyright © 2004 John Wiley & Sons, Ltd.     

南黄海辐射沙脊群西洋水道污水输移扩散研究

采用沿深平均二维数值模型对南黄海辐射沙脊群西洋海域的潮流场和物质扩散场进行了模拟,计算和分析了大潮情况下海域5 m、7 m和10 m 3种水深(理论基准面下)排放位置处达标污水输移扩散的范围及分布规律。结果表明,污水排入海后,会很快被稀释,各排放位置200和500稀释度等值线包络面积均较小,且包络面积随水深增加有明显变小的规律。拟合了不同污水排放量对应的200和500稀释倍数包络面积,发现两者呈良好的幂级数关系。     

Sedimentary Environments of Cambrian–Ordovician Source Rocks and Ultra-deep Petroleum Accumulation in the Tarim Basin

The Tarim Basin is the only petroliferous basin enriched with marine oil and gas in China. It is presently also the deepest basin for petroleum exploration and development in the world. There are two main sets of marine Source Rocks (SRs) in the Tarim Basin, namely the high over-mature Cambrian–Lower Ordovician (∈–O1) and the moderately mature Middle–Upper Ordovician (O2–3). The characteristic biomarkers of SRs and oils indicate that the main origin of the marine petroleum is a mixed source of ∈–O1 and O2–3 SRs. With increasing burial, the hydrocarbon contribution of the ∈–O1 SRs gradually increases. Accompanied by the superposition of multi-stage hydrocarbon-generation of the SRs and various secondary alteration processes, the emergence and abnormal enrichment of terpenoids, thiophene and trimethylaryl isoprenoid in deep reservoirs indicate a complex genesis of various deep oils and gases. Through the analysis of the biofacies and sedimentary environments of the ∈–O1 and O2–3 SRs, it is shown that the lower Paleozoic high-quality SRs in the Tarim Basin were mainly deposited in a passive continental margin and the gentle slope of the platform, deep-water shelf and slope facies, which has exhibited a good response to the local tectonic-sedimentary environment. The slope of the paleo-uplift is the mutual area for the development of carbonate reservoirs and the deposition of marine SRs, which would be favorable for the accumulation of petroleum. Due to the characteristics of low ground temperature, the latest rapid and deep burial does not cause massive oil-cracking in the paleo-uplift and slope area. Therefore, it is speculated that the marine reservoirs in the slope of the Tabei Uplift are likely to be a favorable area for deep petroleum exploration, while the oil-cracking gas would be a potential reserve around the west margin of the Manjiaer Depression. Hydrocarbons were generated from various unit SRs, mainly migrating along the lateral unconformities or reservoirs and the vertical faults. They eventually brought up three major types of exploration fields: middle and lower Cambrian salt-related assemblages, dolomite inner reservoirs and Middle and Lower Ordovician oil-bearing karst, which would become the most favorable target of marine ultra-deep exploration in the Tarim Basin.     

塔里木盆地英买力地区原油地球化学特征与族群划分

塔里木盆地英买力地区油气成因复杂,采用多馏分、多组分化学成分分析及单体烃碳同位素分析途径,对该区海相、陆相油进行精细分析。结果表明,英买力油田主要有两大类油组,分别是南部YM2井区的海相油(I类)和北部YM7井区的陆相油(Ⅱ类),各自具有典型的海相油与陆相油的特征。进一步分析表明,两大油组内部仍有分异。将第二油组进一步分为两亚类,以中、古生界产层为主的正常黑油和重质油为一类(Ⅱa),以古近系为主的凝析油为另一类(Ⅱb)。两亚类原油正构烷烃单体烃同位素稍有差异,芳烃组成与分布具有显著差异。较之于Ⅱa原油,Ⅱb原油富含联苯系列与氧芴系列、不同类型芳烃系列中以低分子量同系物占绝对优势,其正构烷烃单体烃碳同位素更重,与相邻的羊塔克地区原油表现出一定的相似性,表明两者之间有一定的成因联系,前者可能为混源油,由位于库车坳陷中拜城凹陷提供两种陆相烃源岩。英买力地区陆相油并非以往确认的一种成因类型,可能至少由两套性质迥异的中生界烃源岩供烃。英买力地区第一类海相油(I类)尽管生物标志物特征相近,但分析原油的单体烃碳同位素具有显著差异,同样存在油气混源的可能。英买力地区海、陆相原油特征与成因的深入剖析,对于该区精细油源确认、油气成藏机制乃至油气资源评价具有重要意义。     

沾化凹陷桩西油田古近系东营组重力流水道的沉积特征及形成条件

济阳坳陷沾化凹陷桩西油田古近系东营组下段砂体平面呈条带状展布,与曲流河单河道沉积砂体形态类似。砂岩的沉积成因是建立高精度时间地层格架、预测储集层属性参数空间分布及挖潜剩余油的关键基础之一。综合分析区域地质背景、地层沉积序列、岩石学性质、沉积组合以及砂体几何形态等方面,认为桩西油田东下段砂岩是在半深湖—深湖环境沿湖盆长轴方向延伸的远源滑塌型重力流水道—浊流水道沉积;沉积物源主要来自北部埕北低凸起附近的扇三角洲和水下扇。根据重力流水道的成因机制,将东下段浊流水道划分为水道中心微相、水道边缘微相和水下漫溢微相。单一水道中心微相沉积序列相当于鲍玛序列的AB、ABD或AC组合,主要沉积中厚层正递变层理含砾细砂岩相和块状层理混合碎屑岩相,属中孔中低渗储集层。研究区滑塌型浊流水道形成的外部控制因素是火山喷发及控盆断层的幕式活动所导致的长期基准面下降;内部控制因素是充足的物源、垂直湖盆长轴方向的阶梯状断裂以及负向湖盆底形等。建立了反映该区浊流水道的沉积特征及发育条件的沉积模式。     

珠江口盆地荔湾井区珠江组深水扇沉积特征

珠江口盆地白云凹陷荔湾深水区为油气勘探有利区域,通过岩石学和古生物组合特征研究,认为该区珠江组下部属于典型的深水扇沉积,可划分为早期盆地扇和晚期斜坡扇两种类型,两类深水扇都以发育颗粒流、砂质碎屑流及低密度浊流等顺坡重力流沉积为主,同时夹有少量内波和等深流等深水牵引流改造沉积。砂质碎屑流为两类深水扇水道砂体的主要沉积类型,发育有逆-正粒序层理、平行层理和水平层理,粒序层内可见各种丰富的液化变形和生物逃逸构造,而水平层内发育有更多的生物钻孔和扰动现象。两类深水扇的沉积构造和古生物特征有明显差异,其中盆地扇水道砂岩中普遍含硅质小砾石,水道间泥岩中含有较多保存完好的抱球虫化石,斜坡扇水道砂岩以富含炭泥屑为典型特征,水道间泥岩含有更丰富的颗石藻和抱球虫化石,其中部分抱球虫和颗石具有遭受海底溶蚀作用的现象,指示斜坡扇相对盆地扇有更大的水体深度。平面上两类深水扇具有相似的重力流沉积的分带性,都具有自陆架坡折向盆地方向由颗粒流沉积逐渐向砂质碎屑流和近源高密度浊流、远源低密度浊流等单向演化的特点。     

基于 LandSat影像的近30年湛江东北海岸线变迁分析

利用1958—2020年实测地形数据与长江入海水沙数据,分析长江口南支最大的涨潮槽———新桥水道动力地貌变化及其 驱 动 机 制。结 果 表 明:新 桥 水 道 在 1958—2020 年 间 的 地 貌 演 变 可 以 分 为 3 个 阶 段:第 一 阶 段(1958—1997年)新桥水道受控于径流、潮流的耦合作用而经历“冲刷-淤积”的周期性变化,其中河槽主要展现上、下游迁移及河槽收缩交替等特征;第二阶段(1997—2003年)因1998和1999年大洪水造成新桥水道冲刷,新桥水道河槽向上游拓展延伸,河道拓宽明显;第三阶段(2003—2020年)则受人类活动干预和扁担沙北移及径流、潮流耦合作用,新桥水道向下游迁移束窄,并逐渐形成以河道上段为淤积中心的地貌演化格局。此外,随着东风西沙水库构建,拦蓄了部分应进入新桥水道的水体,致使河槽上段落潮动力减弱而加剧河槽淤积,导致新桥水道进一步淤浅。     

Study on extracting alumina from fly ash by compound additive activation method

According to the chemical and mineral composition characteristics of the fly ash, alumina can be extracted from fly ash through the calcining method by using sodium carbonate and calcium carbonate additives. The effects on leaching rate of alumina have been investigated. The results showed that the fly ash can be activated effectively and the leaching rate of alumina can be improved to more than 92% through this method. The best process parameters were the ratio of raw materials, i.e. the material weight ratio of fly ash, calcium carbonate and sodium carbonate was 1.0：1.2：0.9. The activating temperature was 850℃-900℃, activating time was 3 h. This process has a potential application prospect and improves the value of comprehensive utilization of fly ash.