华南飑线系统对流与层云区闪电起始和通道位置处的云微物理特征

利用广州S波段双偏振雷达观测数据和低频电场探测阵列三维闪电定位数据,分析了2017年5月4日和5月8日华南地区两次飑线过程中闪电起始和通道位置处的雷达偏振参量和降水粒子特征.两次飑线中约80％的闪电起始和通道(统称闪电放电)定位于对流区.对流区闪电放电位置处的雷达反射率(ZH)要比层云区平均大4～5 dBZ,其它偏振参...     

Feedbacks between erosion and sediment transport in experimental bedrock channels

Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd.     

伶仃洋沉积动力特点的研究

位于珠江三角洲东侧的伶仃洋，因径流下泄与潮流进退的流向不一，使它各分流口门的出口水道都有主槽和支槽之分，即都有主干水道和分汊水道。陆架高盐海水入侵又使伶仃洋内沉积动力过程在空间分布上发生差异，如沉积物分布有粗－细－稍粗之分；而水体中的密度、速度差异，常常产生锋带，对水下地形的发展有不可忽视的影响。因而全面认识发生在伶仃洋内的沉积动力作用，对深水航道的选线极为重要。     

安徽铜陵地区含金硫化物矿床成矿作用

铜陵地区位于华中地洼区,苏鄂地洼系。具工业价值的金矿床多赋存于地洼期次一级构造以及它们的交汇处,这是本区构造控矿的特点。近矿围岩以地台型碳酸盐岩为主,矿体明显受地层层位控制。与矿化有关的侵入岩,主要形成于地洼期(燕山早、中期)。岩体形成后叠加了成矿热液的多次活动。金的成矿作用及金矿床的形成,通常与含金丰度相对较高的地台构造层有密切的成因联系,它们提供了重要的物质来源,可认为是矿源层(Source beds)。本区各主要矿床是以地洼型岩浆期后热液作用为主的多因复成层控含金硫化物矿床。     

古河道型砂岩铀矿床与古河谷型砂岩铀矿床语义辨析

本文通过对河道和河谷两个不同地貌单元特征的界定 ,澄清铀矿地质领域中对古河道型砂岩铀矿床与古河谷型砂岩铀矿床概念上的混淆。同时就河道与河谷对基准面变化的响应及充填序列特征作了探讨 ,为确定古河道在平面上的展布提供依据。     

冰塞水位分析

高纬度地区河流冬季常形成冰塞,冰塞堵塞过流断面,使湿周增加,致上游水位升高,常因此产生凌洪灾害,冰塞的解体、溃决又常使下游产生灾害。冰期水位是冰塞演变和发展的重要结果之一,对于防灾减灾具有重要的参考价值。依据实验室资料和黄河河曲段的实测资料,针对直道和弯槽,对比分析了不同冰流量、不同初始水深和流速时模拟冰塞和天然河道冰期水位的变化规律。     

利用暗原色先验知识实现航空影像快速去雾

针对城区影像中存在的白色建筑物、城市广场、水泥路面等区域暗原色先验失效问题和现有的去雾流程中地物辐射大气透射率计算复杂、耗时的弊端,利用航空影像中的雾分布相对均匀,且景深变化不大的特点,在保证不明显降低去雾效果的前提下,设计了一种新的透射率快速计算方法,实现航空影像的快速去雾处理。利用多幅影像数据进行实验,并设计了一组图像清晰度评价指标,对去雾结果进行定量分析。     

Bedload transport resistance in rough open‐channel flows

During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance f_bt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict f_bt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of f_bt and grain resistance f_c suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, f_bt/f_c increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.     

湖北省铜山口铜(钼)矿床成矿流体水岩反应数值模拟

湖北省铜山口铜(钼)矿床是一典型的夕卡岩 斑岩复合型矿床。通过对其流体包裹体的系统研究,确定了成矿流体的成分及温压条件;结合矿床学的研究,将成矿过程分解为两个平行的成矿阶段,即夕卡岩型矿化阶段和斑岩型矿化阶段。根据Johnson和Reed等人建立的水 岩反应模型,对该矿床的成矿流体与围岩的反应并析出金属沉淀的过程进行了数值模拟计算。结果表明:在斑岩型矿化阶段,成矿流体系统出现等焓减压沸腾过程并沉淀出大量的金属矿物,成矿流体分异为低盐度流体和高盐度流体;在夕卡岩型成矿阶段,沉淀出典型的夕卡岩矿物;在整个成矿过程中,成矿流体的pH值逐渐升高。模拟计算结果与实际地质现象非常吻合,说明所建立的水 岩反应模型可以为理解这一类复合型金属热液矿床的形成机制提供一个新的思路。     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.