Floating and fixed artificial habitats: Spatial and temporal patterns of benthic communities in a coral reef environment

While natural marine habitats with motion capabilities, e.g., kelps and seaweeds, have been studied alongside their associated fouling communities, little is known of the effect of motion on the communities of floating artificial habitats such as buoys, rafts, and pontoons, particularly in tropical systems. Hydrodynamic features greatly differ between floating and fixed artificial substrata, which in turn affect the structure of their associated communities. This study tested the hypothesis that floating and fixed artificial installations in a tropical reef system (Eilat, Red Sea) would support different benthic communities throughout space and time. Specifically, we examined differences in communities recruited onto settlement plates between floating and fixed installations deployed at three different sites, along a two-year monitoring period. The three sites exhibited distinct differences in species assemblages between the monitoring dates (6, 12, 18 and 24 months post deployment), mainly between the first and the last two dates. The average level of dissimilarity between floating and fixed installations increased over time at all sites. Over 50% of the dissimilarity between the floating and fixed installations resulted from five taxonomic groups i.e., bryozoans, bivalves, barnacles, sponges, including the amount of bare space on the settlement plates. The contribution of these groups to the dissimilarity changed both temporally within each site, and spatially among sites. The observed differences were related to the hydrodynamic characteristics of floating and fixed habitats, interacting with biotic features such as predation, successional processes and seasonality; and abiotic features including small-scale spatial changes, light, and position in the water column.     

Analysis of threshold and incipient conditions for sediment movement

Prediction of threshold conditions and incipient motion is the essential issue for the study of sediment transport. This work compares existing empirical threshold curves proposed for Shields diagram, a method based on the concept of probability of sediment movement, and an empirical method based on movability number. These methods are used to predict the incipient motion conditions for experimental runs taken from various studies. Most of the experimental data, used in this work, have not been used before in derivation of alternative formulations for Shields diagram and other methods. The empirical threshold curves based on the Shields entrainment function was the least successful at predicting the measured incipient motion conditions, while the use of the movability number gives good predictions of critical shear velocity compared with experimental data.     

��³������ִ��������о�

????????1956??1999??????????????????????????顢?????顢?????????????????????????????б??????е??????Щ???????????????4??????У?1956??1978????????????????????????????????ε????Ms7.4?????????????й??1978??1985???1990??1995?????????????????????????鶫??????Ms6.2 ??Ms6.1?????й??     

�봨����ǿ��۲�

????????????????;????????????????????????????????????????????????????????????????????????????     

Case Study of Fog Predictability for an Event with Cold-Front Synoptic Pattern

Fog has recently become a frequent high-impact weather phenomenon along the coastal regions of North China. Accurate fog forecasting remains challenging due to limited understanding of the predictability and mechanism of fog formation associated with synoptic-scale circulation. One frequent synoptic pattern of fog formation in this area is associated with cold front passage(cold-front synoptic pattern, CFSP). This paper explored the predictability of a typical CFSP fog event from the perspective of analyzing key characteristics of synoptic-scale circulation determining fog forecasting performance and the possible mechanism. The event was ensemble forecasted with the Weather Research and Forecasting model. Two groups of ensemble members with good and bad forecasting performance were selected and composited. Results showed that the predictability of this case was largely determined by the simulated strengths of the cold-front circulation(i.e., trough and ridge and the associated surface high). The bad-performing members tended to have a weaker ridge behind a stronger trough, and associated higher pressure over land and a weaker surface high over the sea, leading to an adverse impact on strength and direction of steering flows that inhibit warm moist advection and enhance cold dry advection transported to the focus region. Associated with this cold dry advection, adverse synoptic conditions of stratification and moisture for fog formation were produced, consequently causing failure of fog forecasting in the focus region. This study highlights the importance of accurate synoptic-scale information for improved CFSP fog forecasting, and enhances understanding of fog predictability from perspective of synoptic-scale circulation.     

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.     

可见光下Li+/CNTS-TiO2光催化剂降解海洋柴油污染的研究

通过溶胶-凝胶法,以CNTS-TiO₂为前驱物制备了Li⁺掺杂CNTS-TiO₂的纳米复合光催化剂(以下均称为Li⁺/CNTS-TiO₂),采用X射线衍射(XRD)、扫描电镜(SEM)等测试手段对光催化剂进行表征,结果表明制得的催化剂为纳米材料且在TiO₂的基础上增大了比表面积。利用掺杂量为3%的Li⁺掺杂CNTS-TiO₂复合光催化剂(以下均称为3%Li⁺/CNTS-TiO₂)光催化降解海洋柴油污染,在可见光条件下考察了Li⁺掺杂量、煅烧温度、光催化剂投加量、柴油初始质量浓度、光催化反应时间、H₂O₂质量浓度等条件对光催化实验的影响。进行正交实验,确定最优化工艺条件为:Li⁺掺杂量为3%,光催化剂的煅烧温度为600 ℃,3%Li⁺/CNTS-TiO₂的投加量为0.1 g/L,降解柴油初始质量浓度为0.4 g/L,光催化反应时间为3 h,H₂O₂质量浓度为0.6 g/L,降解率可以达到95%以上。同时对此光催化剂进行应用试验,试验结果表明光催化剂去除效果优异,去除率可达91.87%。     

半潜式浮式风机支撑平台首摇运动特性分析

借助FAST软件对OC4半潜式浮式风机平台进行数值计算,分析了影响海上浮式风机平台首摇运动的一系列重要因素及其变化规律(如风向变化、浪向变化、陀螺力矩等)。研究了平台首摇运动所诱导的风机系统动力响应,发现浮式风机首摇运动不仅会加剧平台耦合运动响应,而且还会影响风机的气动性能和加剧锚泊张力波动。提出并探讨了几种减小海上浮式风机支撑平台首摇运动的方法。     

轴压作用下双金属复合管组合作用与承载力分析

为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。     

Truss Spar平台在波流联合作用下运动响应预报方法比较

基于细长体水动力模型比较了Truss Spar平台在波流联合作用下运动响应预报的三种方法。分别采用波流耦合、速度叠加及力叠加计算Truss Spar平台在波流联合作用下的水动力载荷,根据流场水质点运动规律和Truss Spar外部形状特点,分段高效计算水动力载荷。利用Runge-Kutta-Fehlberg方法求解刚体非线性运动方程得Truss Spar在波流场中的运动响应。研究结果表明力叠加法所预报的Truss Spar纵荡和纵摇运动明显大于其他两种方法的相应运动响应预报结果,而波流耦合法与速度叠加法所预报的纵荡与纵摇运动响应幅值相当,三种方法所预报的垂荡运动响应的大小取决于具体波流参数。