粤西湛江港海底沉积物重金属的分布特征与来源

2004年9月23日至10月5日对湛江港海洋沉积物中金属元素的含量及分布进行了调查。共采集样品20个,采用王水-氢氟酸消解,电感耦合等离子体发射光谱法测定样品中的金属元素As、Cd、Co、Cr、Cu、Ni、Pb、Zn、Al、Ca、Fe、Mg和Mn。结果发现,湛江港大多数区域的沉积物未受污染,但霞山区港务局码头附近海域受到Cd、Cu和Pb的轻度污染,特呈岛养殖区也受到Cu的轻度污染。主成分分析结果表明,Al、Cd、Co、Cr、Cu、Fe、Ni、Pb和Zn主要通过陆源输入进入近岸水域的沉积相中,Ca、As、Mg和Mn主要通过海洋环境中水相和沉积相的相互作用进入沉积相中。结合其它调查结果认为,湛江港的Cd污染在水相、沉积相和生物相中均已存在,应引起有关部门的高度重视。     

Intercomparison of coastal area morphodynamic models

Five different coastal area morphodynamic models have been set up to run on the same offshore breakwater layout and an intercomparison carried out on the hydrodynamic and morphodynamic output produced by each scheme. In addition, the predicted morphodynamics was checked against available laboratory and field data.It is concluded that the models are capable of producing realistic estimates for the dominant morphodynamic features associated with offshore breakwaters. Coupling of the wave, current and sediment transport components of each scheme is shown to yield bathymetry which attains a state of equilibrium, unlike models which are based on the initial transport field only.     

CPⅢ测量数据处理系统开发若干关键技术研究

本文首先介绍了无砟轨道的相关内容,指出CPⅢ测量数据处理是整个建设中的关键,提出系统开发的总体目标与要求且设计了系统总体结构,详细阐述了系统开发中涉及的关键技术与基本理论,文中最后结合具体工程实例验证系统开发成果。     

基于本体的地理信息服务查询组件设计

介绍了一种基于本体的服务发现组件设计方法,将基于本体的元数据和基于本体的查询结合起来,提高了基于OGC标准的网络地理服务发现的查询效率和准确性.     

On the multivariate total least-squares approach to empirical coordinate transformations. Three algorithms

The multivariate total least-squares (MTLS) approach aims at estimating a matrix of parameters, Ξ, from a linear model (Y−E _Y = (X−E _X ) · Ξ) that includes an observation matrix, Y, another observation matrix, X, and matrices of randomly distributed errors, E _Y and E _X . Two special cases of the MTLS approach include the standard multivariate least-squares approach where only the observation matrix, Y, is perturbed by random errors and, on the other hand, the data least-squares approach where only the coefficient matrix X is affected by random errors. In a previous contribution, the authors derived an iterative algorithm to solve the MTLS problem by using the nonlinear Euler–Lagrange conditions. In this contribution, new lemmas are developed to analyze the iterative algorithm, modify it, and compare it with a new ‘closed form’ solution that is based on the singular-value decomposition. For an application, the total least-squares approach is used to estimate the affine transformation parameters that convert cadastral data from the old to the new Israeli datum. Technical aspects of this approach, such as scaling the data and fixing the columns in the coefficient matrix are investigated. This case study illuminates the issue of “symmetry” in the treatment of two sets of coordinates for identical point fields, a topic that had already been emphasized by Teunissen (1989, Festschrift to Torben Krarup, Geodetic Institute Bull no. 58, Copenhagen, Denmark, pp 335–342). The differences between the standard least-squares and the TLS approach are analyzed in terms of the estimated variance component and a first-order approximation of the dispersion matrix of the estimated parameters.     

基于非充分掺混模式的流域来水组成模型

针对如何减小数值求解对流输运方程耗散误差的问题,引进断面计算浓度的概念来计算河段平均浓度,提出了非充分掺混模式的有限控制体积法离散对流输运方程的新算法,据此构建了模拟流域内的水源组成以及不同水源在流域内的时空变化情况的流域来水组成模型。通过数值试验与具体实例验证,结果表明所提出的非充分掺混模式的新算法可有效地提高流域来水模型的计算精度。     

Glacio-lacustrine stratigraphy,aquifer characterization and contaminant transport: a case study in South Lake Tahoe,California, USA

A hydrogeologic model that has been used by many researchers and consultants to describe an area of South Lake Tahoe, California, USA impacted by MTBE contamination describes a relatively homogeneous unconfined aquifer comprised of poorly sorted glacial outwash deposits, within which water-supply wells are able to exert significant alteration in natural groundwater flow. A re-examination of the area’s hydrogeology is presented, which supports a layered heterogeneous aquifer system constructed of alternating fine and coarser-grained glacio-lacustrine depositional units. This re-evaluation was accomplished through a review of lithologic logs across an area of approximately 1 km², combined with observations of significant hydraulic head differences and knowledge of the depositional environments controlled by Pleistocene Lake Tahoe high stands. Many of the fine-grained units observed at depths from 6 to 15 m, although relatively thin, are generally continuous and serve as significant barriers to groundwater flow. The vertical migration of contamination across these fine-grained units to deeper groundwaters was facilitated by cross-screened monitoring wells installed as part of site investigation activities. This conclusion highlights the importance of geologic characterization and proper monitoring well construction at contaminated site investigations.

---

Electronic supplementary material   The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

基于GIS组件与ANN耦合技术的矿井构造复杂程度评价

矿井构造是影响煤矿安全生产的主要因素,对瓦斯突出、矿井突水有着明显的控制作用。矿井构造具有空间性和非线性等特点,使矿井构造复杂程度评价的难度较大,据此利用MapObjects的空间分析功能和非线性人工神经网络（ANN）耦合技术,对矿井构造复杂程度进行评价。根据前人的研究成果,将突水系数、底板倾角变异系数、底板标高变异系数、断层强度指数、断层密度等5项指标引入评价体系,经过空间分析统计和模型识别,建立了矿井构造复杂程度评价模型。在开滦矿区东欢矿8煤层构造复杂程度的评价中,共训练及评价了研究区的226个评价单元．评价结果表明研究区西部及西北部构造复杂,中部及东南部构造相对简单。