基于分形几何理论的DFN模型构建方法研究

以重庆梁-忠（梁平县-忠县）高速公路礼让隧道为工程研究背景,通过测线法调查现场节理,获得了节理产状分布概率密度函数,并从分形几何学的角度分析了节理间距及迹长的分形分布规律,推导出能反映节理间距及迹长分布状态的分形维数D及分形分布概率密度函数。在该基础上采用Matlab软件以及Monte-Carlo随机分析方法,产生节理参数随机数,结合3DEC中最新模块离散裂隙网络(DFN)技术,建立了能反映节理裂隙分布特征的离散裂隙网络模型并验证了模型的有效性,结果表明,分形分布比负指数分布包含更多的间距、迹长分布信息,更接近于实际分布;分形维数D反映了节理间距、迹长在其变化范围内的分布特征,分形维数的大小取决于小间距、小迹长部分数量在总节理数量中的比例,为节理裂隙岩体网络模型构建提供了一种新方法。     

节理型黄土开挖边坡塌滑破坏机理

黄土节理控制着黄土区地下水或者地表水的运输通道,黄土节理的发育致使黄土节理扩张为局部大的拉张裂隙,在拉张力作用下使得黄土高原地区塌滑灾害频繁发生。通过野外调查和分析,提出了黄土开挖边坡塌滑破坏可分为4个阶段:坡脚侵蚀剥落阶段、坡顶拉裂阶段、垂直裂隙扩展阶段、边坡整体塌滑破坏阶段。结合工程实例,通过概化的三维数值分析模型,使用岩土工程软件FLAC3D模拟分析了在3种降雨量条件(40 mm/d、80 mm/d、100 mm/d)下,降雨2 d后概化模型的塌滑破坏情况,这可为工程地质条件相同地区的黄土开挖边坡塌滑变形破坏的分析以及防治提供一种有效分析范例。     

基于最小能耗的海洋浮式平台位置轨迹优化

【目的】研究解决海洋大惯量浮式平台在复杂海况影响下所引起的振动冲击问题。【方法】采用逆运动学分析方法对平台回转位置进行优化研究,提出一种基于关节最小耗能的多目标轨迹优化算法。采用分段样条插值方法构造关节位置曲线,并建立关节能耗轨迹优化模型,采用粒子群算法实现对关节位置的优化搜索,从而得到基于平台转动最小耗能的位置优化轨迹。【结果与结论】所采用的轨迹优化方法能有效改善系统运行的平滑性,降低回转机构振动与冲击的影响程度,可为平台的振动与冲击主动控制提供必要的理论依据。     

3维场景植被冠层多波段模拟研究进展

植被冠层辐射散射信号中蕴含了丰富的植被信息,通过构建植被冠层辐射散射模型,可以实现植被结构等生物物理参数的遥感定量反演。迄今为止,可见光/近红外、热红外、微波波段均已发展了大量的模型,这些模型在参数反演方面各具优势,但不同波段的模型又有其自身的局限性。跨波段的联合模拟可以实现模型间的优势互补,进而提高地表参数的反演精度,近年来已有学者专注于可见光/近红外与热红外模型,热红外与微波模型,主被动微波模型,以及可见光/近红外与微波模型的联合模拟和协同反演,但多是两两联合,且主要是基于经验模型或解析模型。基于3维场景的植被冠层辐射散射特性模拟模型可以细致刻画不同组分的结构和空间分布特征,对于由植被结构引起的多次散射和组分比例变化的考虑具有优势。本文主要介绍了3维模拟模型在可见光/近红外、热红外和微波波段,以及跨波段联合模拟方面的研究进展,从模型机理、场景统一、以及组分理化参数的统一的角度,探讨了构建多波段3维模拟系统的可行性,展望了多波段3维模拟模型的发展趋势。     

浪流作用下系泊船舶撞击力和系缆力试验研究

以某25万吨矿石码头工程为例,分别进行了单流、单浪和浪流共同作用下,系泊船舶撞击力和系缆力试验。研究了不同水位、不同船舶载度、不同浪流夹角,单流、单浪和浪流共同作用时对船舶撞击力和系缆力的影响。分析了该码头工程护舷和缆绳的布置情况,为工程设计提供了依据。     

节理网络分形在隧道超前地质预报中的应用

分形几何是20世纪70年代以来发展起来的研究非线性现象的理论和方法,这一理论的诞生为揭示隐藏于混乱复杂现象的精细结构和定量地描述它们提供了理论基础。将分形的方法引入到隧道的超前地质预报,通过岩体结构面网络的分维值来预测岩体的质量。结合工程实例可以看出,岩体结构具有良好的分形特征,其分形描述可作为评价结构岩体质量的标准之一。分形方法是评价岩体性质的一个有效的方法,具有广泛的应用前景。     

RESEARCH ON THE CHARACTERISTICS OF QUATERNARY ACTIVITIES OF SU-XI-CHANG FAULT

Running across the urban areas of Changzhou, Wuxi and Suzhou, the NW-trending Su-Xi-Chang Fault is an important buried fault in Yangtze River Delta. In the respect of structural geomorphology, hilly landform is developed along the southwest side of the Su-Xi-Chang Fault, and a series of lakes and relatively low-lying depressions are developed on its northeast side, which is an important landform and neotectonic boundary line. The fault controlled the Jurassic and Cretaceous stratigraphic sedimentary and Cenozoic volcanic activities, and also has obvious control effects on the modern geomorphology and Quaternary stratigraphic distribution. Su-Xi-Chang Fault is one of the target faults of the project "Urban active fault exploration and seismic risk assessment in Changzhou City" and "Urban active fault exploration and seismic risk assessment in Suzhou City". Hidden in the ground with thick cover layer, few researches have been done on this fault in the past. The study on the activity characteristics and the latest activity era of the Su-Xi-Chang Fault is of great significance for the prevention and reduction of earthquake disaster losses caused by the destructive earthquakes to the cities of Changzhou, Wuxi and Suzhou. Based on shallow seismic exploration and drilling joint profiling method, Quaternary activities and distribution characteristics of the Su-Xi-Chang Fault are analyzed systematically. Shallow seismic exploration results show that the south branch of the Su-Xi-Chang Fault in Suzhou area is dominated by normal faulting, dipping to the north-east, with a dip angle of about 60° and a displacement of 3~5m on the bedrock surface. The north branch of the Su-Xi-Chang Fault in Changzhou area is dominated by normal faulting, dipping to the south, with a dip angle of about 55°~70° and a displacement of 4~12m on the bedrock surface. All breakpoints of Su-Xi-Chang Fault on the seismic exploration profiles show that only the bedrock surface was dislocated, not the interior strata of the Quaternary. On the drilling joint profile in the Dongqiao site of Suzhou, the latest activity of the south branch of Su-Xi-Chang Fault is manifested as reverse faulting, with maximum displacement of 2.9m in the upper part of Lower Pleistocene, and the Middle Pleistocene has not been dislocated by the fault. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 3.7m in the Neogene stratum. On the drilling joint profile in the Chaoyang Road site of Changzhou, the latest activity of the north branch of Su-Xi-Chang Fault is manifested as reverse faulting too, with maximum displacement of 2.8m in the bottom layer of the Middle Pleistocene. The fault acts as normal fault in the Pre-Quaternary strata, with a displacement of 10.2m in the bedrock surface. Combining the above results, we conclude that the latest activity era of Su-Xi-Chang Fault is early Middle Pleistocene. The Su-Xi-Chang Fault was dominated by the sinistral normal faulting in the pre-Quaternary period, and turned into sinistral reverse faulting after the early Pleistocene, with displacement of about 3m in the Quaternary strata. The maximum magnitude of potential earthquake on the Su-Xi-Chang Fault is estimated to be 6.0.     

基于交叉梯度约束的电阻率法和背景噪声法三维联合反演研究

电阻率法和背景噪声法是通过获得地下介质的电阻率和速度参数的分布来探究地球内部物质分布的非均匀性特征,联合反演可以有效地发挥两种方法的优势,减小反演多解性.本文采用有限内存拟牛顿（L-BFGS）算法实现了电阻率法和背景噪声法的单方法三维反演,然后基于电阻率和速度模型结构耦合约束,采用交替迭代方式实现了电阻率法和背景噪声法的三维联合反演.通过设计规则体组合模型和不规则体组合模型进行理论模型合成数据三维反演试算,结果表明：联合反演可以获得同时满足数据拟合差和结构更为相似的速度-电阻率模型;联合反演可以压制背景噪声单方法反演出现的假异常,获得更精细的速度结构;联合反演获得的电阻率模型对倾斜异常体、高阻覆层下方异常体、圈闭的高/低阻体等边界信息有明显的提升,有效克服电阻率法单方法反演的局限,提高深部电阻率的分辨率.

     

Tomographic determination of 3-D crustal structure — Joint inversion of explosion and earthquake data

In this paper, the theory and method, obtaining the tomographic determination of three-dimensional velocity structure of the crust by use of the joint inversion of explosion and earthquake data, are given. The velocity distribution of the crust is regarded as a continuous function of the spatial coordinates without parametrization of the velocity model ahead, so that the inversion solution would not be influenced by different parametrization procedures. The expressions of integration kernels, which relates the two kinds of data sets, are also given. The authors have processed the observed data in Tangshan earthquake region by the method proposed in this paper, and obtained the tomographic results of the middle and upper crust structures in this region. The comparison of these results with the result obtained only by the explosion data, has also been made.     

基于最优极化相干系数的倾斜建筑物解译研究

基于Freeman_Durden分解的全极化SAR影像分类方法能够较好地保持地物极化散射特性,但在分类的过程中,不能改变初始散射机制,导致分解结果对分类精度影响很大。在Freeman_Durden分解中,排列方向相对雷达飞行方向不平行的建筑物（简称为倾斜建筑物）常被分为体散射类型,使得该类建筑物往往被误分为植被。本文通过分析建筑物在SAR影像中的后向散射特性,利用建筑物具有较高相干性的特点,引入最优极化相干系数,在目标分解的基础上通过阈值分割将两者区分开来,进而提高反射非对称性人工目标的分类效果。通过使用E-SAR系统在德国DLR附近Oberpfaffenhofen地区获取的L波段PolInSAR影像和国内X-SAR系统在海南陵水地区获取的X波段PolInSAR影像进行实验,证明本文提出的方法能够有效地将与雷达飞行方向不平行的建筑物与森林区分开。