Delayed plastic model for time‐dependent behaviour of materials

A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd.     

Elastic collisions in ion irradiation experiments: A mechanism for space weathering of silicates

Ion irradiation experiments have been performed on silicates (bulk samples) rich of olivine, pyroxene, and serpentine to simulate the effects of space weathering induced on asteroids by solar wind ions. We have used different ions (H⁺, He⁺, Ar⁺, Ar²⁺) having different energies (from 60 to 400 keV) to weather the samples, probed by Raman spectroscopy and UV-vis-NIR reflectance spectroscopy. All the irradiated materials have shown reddening and darkening of reflectance spectra in the 0.25-2.7 μm spectral range. We have found that the increase of the spectral slope of the continuum across the 1-μm band is strongly related with the number of displacements caused by colliding ions because of elastic collisions with the target nuclei. The spectral slopes have been compared, at increasing ion fluence, with those from irradiated Epinal meteorite. We show that formation of nuclear displacements by solar wind ion irradiation is a physical mechanism that reddens the asteroidal surfaces on a time-scale lower than 10⁶ years.     

A middle surface concept (MSC) model for saturated sands in general stress space

An elastoplastic constitutive model is proposed for saturated sands in general stress space using the middle surface concept (MSC). In MSC, different features of stress–strain response of a material are divided into different pseudo‐yield surfaces. The true‐yield surface representing the true response is established by using various links between the yield surfaces. In this MSC sand model, several well‐known features of sand response are represented by three different pseudo‐yield surfaces, which are developed in a simple and straightforward way. These features include the critical state behaviour, the effects of state parameter, unloading and reloading plastic deformation, the influence of fabric anisotropy, and phase transformation line related behaviour. Finally, the model predictions and test results are compared for two different types of sands under a variety of loading conditions and good comparisons are obtained. The application of MSC to saturated sand modelling shows the versatility of MSC as a general concept for modelling stress–strain response of materials. Copyright © 2006 John Wiley & Sons, Ltd.     

Spectral observations of 19 weathered and 23 fresh NEAs and their correlations with orbital parameters

Results of our visible to near-infrared spectrophotometric observations of 41 near-Earth asteroids (NEAs) are reported. These moderate-resolution spectra, along with 14 previously published spectra from our earlier survey [Hicks, M.D., Fink, U., Grundy, W.M., 1998. Icarus 133, 69-78] show a preponderance of spectra consistent with ordinary chondrites (23 NEAs with this type of spectrum, along with 19 S-types and 13 in other taxonomic groups). There exists statistically significant evidence for orbit-dependent trends in our data. While S-type NEAs from our survey reside primarily in (1) Amor orbits or (2) Aten or Apollo orbits which do not cross the asteroid main-belt, the majority of objects with spectra consistent with ordinary chondrites in our survey are in highly eccentric Apollo orbits which enter the asteroid main-belt. This trend toward fresh, relatively unweathered NEAs with ordinary chondrite type spectra in highly eccentric Apollo orbits is attributed to one or a combination of three possible causes: (1) the chaotic nature of NEA orbits can easily result in high eccentricity orbits/large aphelion distances so that they can enter the collisionally enhanced environment in the main-belt, exposing fresh surfaces, (2) they have recently been injected into such orbits after a collision in the main-belt, or (3) such objects cross the orbits of several terrestrial planets, causing tidal disruption events that expose fresh surfaces.     

One year irrigation experiment to assess losses and runoff volume relationships for a residential road in hertfordshire,England

Six sections of a residential road (75 mm bituminous macadam over 200mm lean mix concrete over 100 mm hoggin with a recent surface dressing of 10 mm granite chippings and K1-70 binder) that drain to individual instrumented gully pots were irrigated along the kerb and then over the whole road approximately monthly for a year. The aim was the determination of terminal infiltration losses, initial losses, percentage runoff, and infiltration curves for the kerb and road surface. The results were not as expected from the literature. There is an annual cycle of infiltration losses at the kerb with a winter peak caused by frost action that is 3.2 times greater than the terminal loss rate at kerbs in summer. The terminal loss rate for an ‘average catchment’ was 6.4251 min^?1 from the road surface and 14.251 min^?1 in summer and 46.281 min^?1 in winter at the kerb. Evaporation was usually more than an order of magnitude less significant than infiltration. The wide variation in initial losses before runoff commenced was inexplicable. Two sections of road behaved in the classic manner with initial losses averaging 0.8 mm, two other catchments had highly variable initial losses in the range 1.2 to 8.8mm, and the last two pieces of road were even more erratic. The percentage runoff for those irrigations of over 15 mm of equivalent rainfall was never more than 10 per cent. The maximum per cent runoff was around 50 per cent following 10 mm of equivalent rainfall for kerbside irrigation and only 5 mm of irrigation over the whole road. There were no significant simple or multiple regression relationships between percentage runoff from the kerb or the whole road irrigations and irrigation amount, slope, UCWI, and SMD. Infiltration curves, for kerb and road irrigation, were so diverse that they do not represent the ‘simple impervious surfaces’ envisaged at the start of the experiment and described in the literature. Since the artificial irrigation of kerbs and roads has failed to substantiate existing theory, these experiments should be repeated at a variety of sites with a high rate of irrigation.     

Diagenetic signatures of stratal surfaces in the Upper Jurassic Fulmar Formation, Central North Sea, UKCS

Sedimentation rate and changes in relative sea level affect early diagenetic cementation along key stratal surfaces within the deeply buried Upper Jurassic Fulmar Formation, South Central Graben, UKCS. As a result of the bioturbated nature of the shallow marine strata, variations in ichnofabrics and cross-cutting relationships between trace fossils are important in identifying and correlating stratal surfaces. Two transgressive and two regressive surfaces/sequence boundaries were studied, using petrographical, mineralogical and geochemical techniques. Cements, including early diagenetic pyrite framboids, grain-rimming apatite, microcrystalline dolomite and ankerite, occur at, above and immediately below both transgressive and forced regressive surfaces/sequence boundaries. Breaks or subdued rates of sedimentation associated with both types of surfaces meant that the sediment package resided within early diagenetic zones for prolonged periods of time, enhancing diagenetic reactions at and below the surfaces. The distribution of ankerite, despite being a deep-burial cement, was primarily controlled by concentrations of bioclasts that are particularly abundant at transgressive surfaces. The diagenetic character of the forced regressive surfaces/sequence boundaries is more complex than that of the transgressive surfaces, both in terms of mineralogy and paragenesis. This is attributed to the superimposition of diagenetic assemblages as a result of erosion, re-sedimentation and sediment by-passing. Although the diagenetic signature of the surfaces has been modified by dissolution/replacement reactions during deep burial, early diagenetic signatures can still be distinguished.     

Palaeosurfaces and major valleys in the area of the Kjǿlen Mountains,southern Norway - consequences of uplift and climatic change

Protected area management in Norway is undergoing institutional changes with the implementation of management models aimed at increased public participation. At the same time tourism enterprises are increasing in number within the protected areas. Greater levels of interaction with stakeholders place new demands on lead institutions in terms of communication, transparency, involvement, and power sharing. A governance perspective was used to examine some facets of the interaction between a local council managing a national park in Norway and tourism companies using the park for their operations. The main objective was to assess how the tourism sector perceives the cooperation and interface with the management institution. Semi-structured interviews were used, together with a framework of United Nations Development Programme principles of good governance: legitimacy and voice, direction, performance, accountability, and fairness. The results showed rather negative evaluations by the tourism sector, and operators expressed views, implying that the current management model fails to achieve most of the principles of good governance. Although based on a one-sided view by one group of stakeholders, the study suggests that lack of access to important processes and decisions, perceived bias towards traditional conservation, neglect of cultural heritage, and undue restrictions on access could have serious implications for developing an effective management model.     

Analysis and interpretation of Cassini Titan radar altimeter echoes

The Cassini spacecraft has acquired 25 radar altimeter elevation profiles along Titan's surface as of April 2008, and we have analyzed 18 of these for which there are currently reconstructed ephemeris data. Altimeter measurements were collected at spatial footprint sizes from 6-60 km along ground tracks of length 400-3600 km. The elevation profiles yield topographic information at this resolution with a statistical height accuracy of 35-50 m and kilometer-scale errors several times greater. The data exhibit significant variations in terrain, from flat regions with little topographic expression to very rugged Titanscapes. The bandwidth of the transmitted waveform admits vertical resolution of the terrain height to 35 m at each observed location on the surface. Variations in antenna pointing and changes in surface statistics cause the range-compressed radar echoes to exhibit strong systematic and time-variable biases of hundreds of meters in delay. It is necessary to correct the received echoes for these changes, and we have derived correction algorithms such that the derived echo profiles are accurate at the 100 m level for off-nadir pointing errors of 0.3° and 0.6°, for leading edge and echo centroid estimators, respectively. The leading edge of the echo yields the elevation of the highest points on the surface, which we take to be the peaks of any terrain variation. The mean value of the echo delay is more representative of the mean elevation, so that the difference of these values gives an estimate of any local mountain heights. Finding locations where these values diverge indicates higher-relief terrain. Elevation features are readily seen in the height profiles. Several of the passes show mountains of several hundred m altitude, spread over 10's or even 100's of km in spatial extent, so that slopes are very small. Large expanses of sub-100 m topography are commonplace on Titan, so it is rather smooth in many locations. Other areas exhibit more relief, although the overall observed variation in surface height on any pass is less than about 1 km. Some elevation features correspond to observed changes in brightness in Cassini infrared images, but many do not. Correspondence between the imaging SAR ground tracks and the altimeter paths is limited, so that identifying elevation changes with higher resolution SAR features is premature at present.     

Titan's surface at 2.2-cm wavelength imaged by the Cassini RADAR radiometer: Calibration and first results

The first comprehensive calibration and mapping of the thermal microwave emission from Titan's surface is reported based on radiometric data obtained at 2.2-cm wavelength by the passive radiometer included in the Cassini Radar instrument. The data reported were accumulated from 69 separate observational segments in Titan passes from Ta (October 2004) through T30 (May 2007) and include emission from 94% of Titan's surface. They are diverse in the key observing parameters of emission angle, polarization, and spatial resolution, and their reduction into calibrated global mosaic maps involved several steps. Analysis of the polarimetry obtained at low to moderate resolution (50+ km) enabled integration of the radiometry into a single mosaic of the equivalent brightness temperature at normal incidence with a relative precision of about 1 K. The Huygens probe measurement of Titan's surface temperature and radiometry obtained on Titan's dune fields allowed us to infer an absolute calibration estimated to be accurate to a level approaching 1 K. The results provide evidence for a surface that is complex and varied on large scales. The radiometry primarily constrains physical properties of the surface, where we see strong evidence for subsurface (volume) scattering as a dominant mechanism that determines the emissivity, with the possibility of a fluffy or graded-density surface layer in many regions. The results are consistent with, but not necessarily definitive of a surface composition resulting from the slow deposition and processing of organic compounds from the atmosphere.     

Thermal convection in the porous methane-soaked regolith of Titan: Investigation of stability

Titan is the only body, other than the Earth where liquid is present on the surface. In the present work we consider behavior of methane in the pores of Titan's regolith. Using numerical model we investigate quantitative conditions necessary for the onset of convection. We have found that the methane convection in Titan's regolith is possible. It can be expected in regions where the regolith has sufficiently high porosity, independently of the geothermal heat flux.