基于抽水试验的土体渗透性耦合响应模型研究

土体中大量降排水的过程实际上是土体中有效应力增长的过程。通过对抽水试验中土体渗透系数的回归分析,建立了渗透系数与有效应力增量之间的耦合响应模型关系,说明降排水过程中土体渗透系数是呈非线性变化的。     

Dynamical Initialization of Boundary-Layer Data

A procedure for the dynamic initialization of wind and temperature fields within the atmospheric boundary layer (ABL) is presented. The procedure uses transilient turbulence theory to assess the turbulent fluxes from observed wind and temperature data, which are used to estimate the eddy transfer coefficients, so enabling a local closure ABL model to be integrated forward in time to a new steady state. The method has been applied to initialize kytoon data taken at Kharagpur (22.3° N, 87.2° E) during the MONTBLEX field programme. Results of a case study for 17 June 1990 are discussed.     

各向异性介质中的AVO

分析了横向各向同性和方位各向异性介质的本构关系,由此讨论弹性波在两种各向异性介质中的传播特点,提出可表征这两种介质各向异性程度的广义参数．以此为基础讨论了两种各向异性介质中存在水平界面时的反射系数近似式,将Dely等人推导的横向各向同性介质中的反射系数公式推广到方位各向异性介质的主轴方向上．根据算例讨论修正的Banik和Thomsen的近似式,着重分析两种各向异性介质中的AVO关系及其对实际勘探的影响和指导意义．     

Binary coefficients: A theoretical and empirical study

Binary coefficients can be assigned to several categories on the basis of algebraic and conceptual properties. The phi coefficient of association is related algebraically to the chi-square statistic for 2-by-2 contingency tables, and use of this coefficient in cluster analysis permits the objective, nonarbitrary partitioning of objects among groups on the basis of previously selected levels of significant, positive association. Similarity, matching, and distance coefficients possess neither conceptual nor operational statistical meaning for many geological data sets. The weighted pair group method and flexible clustering strategy may give an overly conservative partitioning of objects among groups. Clustering by the unweighted pair group method, using the phi coefficient, is recommended for the analysis of biostratigraphic and paleoecologic presence—absence data.     

Generalized Laplace coefficients and Newcomb derivatives

It is shown how the generalized Laplace coefficients can be employed to deduce explicit formulas for ordinary and Newcomb derivatives of the Laplace coefficients.      

基于分层EOF的深海声速剖面时变特征建模

针对目前局部海域小时间尺度声速场建模方法未顾及不同深度区间内声速变化规律的问题,本文根据实测深海声速剖面的统计特征,提出了声速剖面分层方法,并进一步基于经验正交函数（Empirical Orthogonal Function, EOF）提出了局部小时间尺度的声速剖面分层时变模型构建方法。利用南海实测全海深声速剖面数据,分析了分层EOF第一模态系数和等效平均声速的日变化特征,并比较了不同拟合模型的精度。最后,利用试验海区的温度和潮汐数据分析了声速剖面周期变化的影响因素。结果表明： ①声速剖面分层EOF第一模态系数及等效平均声速具有日周期变化特征,上层声速日周期变化特征不明显,中层声速日周期变化特征较明显,下层声速变化较小但仍具有日周期变化特征;②局部海域小时间尺度声速拟合应考虑长期变化项的影响;③试验海区声速剖面EOF第一模态系数变化与温度显著相关,提取的声速剖面时变特征与海区潮汐周期特征基本吻合。     

闽江流域水体氨氮降解系数实验模拟研究

本研究采用模拟实验对闽江流域氨氮的降解规律进行研究,降解系数采用稳态一维降解模型进行分析计算,闽江上游流域氨氮的平均降解系数为0.140~0.260 d-1,中下游流域氨氮的平均降解系数为0.099~0.203 d-1。结果表明,闽江上游流域氨氮自净能力比中下游流域的自净能力好,古田溪断面的氨氮平均降解系数低于全国的平均值,说明氨氮自净能力相对较弱,本研究为确定流域水环境容量和纳污能力及制定污染物总量控制提供科学依据。     

强迫摇荡运动三维球体水动力系数的CFD计算

采用计算流体力学(CFD)的雷诺平均法(RANS方法),并考虑了自由表面的影响(采用VOF方法模拟自由表面),来模拟三维球体的单自由度强迫摇荡运动,得到纵荡、升沉及横摇的附加质量与阻尼系数。该数值模拟结果与三维势流理论计算的结果进行比较,趋势基本一致,但CFD方法更能凸显粘性的作用。本文所应用方法能合理给出浮式结构物的水动力系数,更精确描述海洋浮式结构物周围的流场,可应用于船舶与海洋工程浮式结构物的水动力性能研究。     

Chalcophile element partitioning between sulfide phases and hydrous mantle melt: Applications to mantle melting and the formation of ore deposits

Understanding the geochemical behavior of chalcophile elements in magmatic processes is hindered by the limited partition coefficients between sulfide phases and silicate melt, in particular at conditions relevant to partial melting of the hydrated, metasomatized upper mantle. In this study, the partitioning of elements Co, Ni, Cu, Zn, As, Mo, Ag, and Pb between sulfide liquid, monosulfide solid solution (MSS), and hydrous mantle melt has been investigated at 1200 °C/1.5 GPa and oxygen fugacity ranging from FMQ−2 to FMQ+1 in a piston-cylinder apparatus. The determined partition coefficients between sulfide liquid and hydrous mantle melt are: 750–1500 for Cu; 600–1200 for Ni; 35–42 for Co; 35–53 for Pb; and 1–2 for Zn, As, and Mo. The partition coefficients between MSS and hydrous mantle melt are: 380–500 for Cu; 520–750 for Ni; ∼50 for Co; <0.5 for Zn; 0.3–6 for Pb; 0.1–2 for As; 1–2 for Mo; and >34 for Ag. The variation of the data is primarily due to differences in oxygen fugacity. These partitioning data in conjunction with previous data are applied to partial melting of the upper mantle and the formation of magmatic-hydrothermal Cu–Au deposits and magmatic sulfide deposits.I show that the metasomatized arc mantle may no longer contain sulfide after >10–14% melt extraction but is still capable of producing the Cu concentrations in the primitive arc basalts, and that the comparable Cu concentrations in primitive arc basalts and in MORB do not necessarily imply similar oxidation states in their source regions.Previous models proposed for producing Cu- and/or Au-rich magmas have been reassessed, with the conclusions summarized as follows. (1) Partial melting of the oxidized (fO₂ > FMQ), metasomatized arc mantle with sulfide exhaustion at degrees >10–14% may not generate Cu-rich, primitive arc basalts. (2) Partial melting of sulfide-bearing cumulates in the root of thickened lower continental crust or lithospheric mantle does not typically generate Cu- and/or Au-rich magmas, but they do have equivalent potential as normal arc magmas in forming magmatic-hydrothermal Cu–Au deposits in terms of their Cu–Au contents. (3) It is not clear whether partial melting of subducting metabasalts generates Cu-rich adakitic magmas, however adakitic magmas may extract Cu and Au via interaction with mantle peridotite. Furthermore, partial melting of sulfide-bearing cumulates in the deep oceanic crust may be able to generate Cu- and Au-rich magmas. (4) The stabilization of MSS during partial melting may explain the genetic link between Au-Cu mineralization and the metasomatized lithospheric mantle.The chalcophile element tonnage, ratio, and distribution in magmatic sulfide deposits depend on a series of factors. This study reveals that oxygen fugacity also plays an important role in controlling Cu and Ni tonnage and Cu/Ni ratio in magmatic sulfide deposits. Cobalt, Zn, As, Sn, Sb, Mo, Ag, Pb, and Bi concentrations and their ratios in sulfide, due to their different partitioning behavior between sulfide liquid and MSS, can be useful indices for the distribution of platinum-group elements and Au in magmatic sulfide deposits.