载荷试验确定基床系数修正方法的讨论

Winkler地基模型是目前工程界应用最广的一种地基模型，但对其关键参数——基床系数k的确定，许多文献的表述并不一致。该文在大量试验资料的基础上，通过对该问题的深入研究，阐明了通过载荷试验确定基床系数修正方法的有关概念。对于砂性土地基，载荷板试验得出的基准基床系数仅需要进行基础大小修正，而对于粘性土地基，则需要进行基础大小和基础形状两项修正。     

水质大涡模拟数学模型研究

建立了基于弱可压缩流基础上的水质大涡模拟数学模型及污染物质扩散系数与平均运动的关系。数值计算采用有限体积法和预测校正法,固壁边界条件采用"部分滑移条件"。并应用该模型对重庆嘉陵江、长江两江交汇段的流场,污染物质浓度分布进行了计算,计算结果与实测值比较吻合。研究表明,横向扩散与流动状态有关,当支流流量相对较小时,横向扩散较弱,形成岸边污染带,当支流流量相对较大时,横向扩散较强,污染带向江心移动。     

Inverse modelling using PS‐InSAR data for improved land subsidence simulation in Las Vegas Valley,Nevada

Las Vegas Valley has had a long history of groundwater development and subsequent surface deformation. InSAR interferograms have revealed detailed and complex spatial patterns of subsidence in the Las Vegas Valley area that do not coincide with major pumping regions. This research represents the first effort to use high spatial and temporal resolution subsidence observations from InSAR and hydraulic head data to inversely calibrate transmissivities (T), elastic and inelastic skeletal storage coefficients (S_ke and S_kv) of the developed‐zone aquifer and conductance (CR) of the basin‐fill faults for the entire Las Vegas basin. The results indicate that the subsidence observations from InSAR are extremely beneficial for accurately quantifying hydraulic parameters, and the model calibration results are far more accurate than when using only groundwater levels as observations, and just a limited number of subsidence observations. The discrepancy between distributions of pumping and greatest levels of subsidence is found to be attributed to spatial variations in clay thickness. The Eglington fault separates thicker interbeds to the northwest from thinner interbeds to the southeast and the fault may act as a groundwater‐flow barrier and/or subsidence boundary, although the influence of the groundwater barrier to this area is found to be insignificant. Copyright © 2016 John Wiley & Sons, Ltd.     

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.     

Effects of surface flux parameterization on the numerically simulated intensity and structure of Typhoon Morakot (2009)

The effects of surface flux parameterizations on tropical cyclone(TC) intensity and structure are investigated using the Advanced Research Weather Research and Forecasting(WRF-ARW) modeling system with high-resolution simulations of Typhoon Morakot(2009).Numerical experiments are designed to simulate Typhoon Morakot(2009) with different formulations of surface exchange coefficients for enthalpy(C_K) and momentum(C_D) transfers,including those from recent observational studies based on in situ aircraft data collected in Atlantic hurricanes.The results show that the simulated intensity and structure are sensitive to C_K and C_D,but the simulated track is not.Consistent with previous studies,the simulated storm intensity is found to be more sensitive to the ratio of C_K/C_D than to C_K or C_D alone.The pressure-wind relationship is also found to be influenced by the exchange coefficients,consistent with recent numerical studies.This paper emphasizes the importance of C_D and C_K on TC structure simulations.The results suggest that C_D and C_K have a large impact on surface wind and flux distributions,boundary layer heights,the warm core,and precipitation.Compared to available observations,the experiment with observed C_D and C_K generally simulated better intensity and structure than the other experiments,especially over the ocean.The reasons for the structural differences among the experiments with different C_D and C_K setups are discussed in the context of TC dynamics and thermodynamics.     

Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.     

平面无结节网衣水阻力系数的试验研究

通过物理模型试验,统计分析得到了无结节网衣的水阻力系数在不同状态下随雷诺数、倾角和布置状态的变化规律,并通过网衣沉子的组合试验验证了所得经验公式的正确性和适用性,为深水网箱等渔具的水动力计算提供了依据.