威海地区高压岩石组合及其成因演化

利用矿物地质温压计估算变质高峰期温压条件、退变质作用温压条件。研究表明,本区为鲁苏构造带的北延部分,代表本区晚元古代华南陆块与华北陆块的碰撞及三叠纪华北陆块向华南陆块推覆事件的发生和演化。     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.     

自行式海底作业车的研究

理论分析和试验研究是本文写作基础，它详细地总结了大洋多金属结核资源开发而研究自行式海底作业车取得中期成果，它对我国大洋采矿和其它海底工程车辆的发展有着重要的文献价值和指导意义。     

海冰板的环形屈曲的压缩破坏

在轴对称条件下，给出海冰板的环向屈曲面临载荷，从细观力学的观点分析了微裂纹开裂的条件，扩展方向并给出绕海洋平台柱腿冰的损伤区的尺度。所给出的临界半径是一个与冰材料力学特征，冰的微结构参数一海洋平台柱腿半径相关的特征参数。对现场所观察和测量的结构给出了解释和定量分析。     

四川汶川大地震的构造分析

2008年5月12日在汶川映秀(北纬31.0°,东经103.4°)发生8级大地震,而后发生万余次余震,其最大震级为6.4级.此次地震属主震-余震型地震.通过构造分析认为.汶川大地震是构造地震,主要受龙门山断裂带的强烈活动控制.它是一种板内地震,其动力来源来自印度板块与欧亚板块的碰撞.而成都平原处于稳定地块中,尽管离震中较近,然受地震的影响有限,是比较安全的.     

太平洋板块俯冲与中国东部中生代地质事件

中国东部至少自侏罗纪开始就一直处于俯冲大洋板块之上,但是有关俯冲板块对其影响程度一直有不同的认识。最近的研究表明,太平洋海山岛链的时空分布显示太平洋板块的漂移方向曾发生多次转折,这些转折与白垩纪中国东部的构造演化和岩浆事件有着密切的时空耦合关系。从时代和力学性质上看,太平洋板块俯冲方向的改变在很大程度上控制着中国东部中生代的盆地演化和郯庐断裂活动等重要地质事件。这些认识为理解中国东部构造演化提供了新的视角,包括岩石圈减薄的机制、郯庐断裂的演化,以及燕山期大规模岩浆活动等。本文重点分析了太平洋板块俯冲与中国东部中生代岩浆活动的对应关系。在125～140Ma太平洋板块向南西方向俯冲,造成中国东部岩石圈减薄,软流圈卸载上涌,发生减压部分熔融;约125Ma,太平洋板块漂移方向发生了大幅度转折,形成安第斯式的俯冲挤压,岩石圈停止减薄和减压部分熔融,出现岩浆宁静期。随着俯冲的深入,到110Ma前后俯冲板块后撤,形成弧后拉张,岩浆活动又重新开始。     

High heat flow anomalies on an old oceanic plate observed seaward of the Japan Trench

Thirty-three new measurements on the seaward slope and outer rise of the Japan Trench along a parallel of 38°45′N revealed the existence of high heat flow anomalies on the subducting Pacific plate, where the seafloor age is about 135 m.y.. The most prominent anomaly with the highest value of 114 mW/m² is associated with a small mound on the outer rise, which was reported to be a kind of mud volcano. On the seaward slope of the trench, heat flow is variable: high (70–90 mW/m²) at some locations and normal for the seafloor age (about 50 mW/m²) at others. The spatial variation of heat flow may be related to development of normal faults and horst/graben structures due to bending of the Pacific plate before subduction, with fluid flow along the fault zones enhancing the vertical heat transfer. Possible heat sources of the high heat flow anomalies are intra-plate volcanism in the last several million years like that discovered recently on the Pacific plate east of the Japan Trench.     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

有关循环经济下农业政策法制建设的探讨

如今，发展循环经济，建立循环型社会已经成为世界各国的潮流和趋势。在中国，要想发展循环经济，必须在各个产业逐步建立起与之相支持的文化、法律、政策、经济和生态体制。中国是一个农业大国，发展循环农业经济建设，无论对循环经济的发展和循环型社会的形成还是对农业经济的发展都具有重要意义。从中国现阶段农业政策法制状况出发，借鉴国外的先进经验，探讨在农业方面实现循环经济的可能性和必要性以及如何完善中国农业制度来适应这一新兴理念。     

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.