VTI介质多波速度与各向异性系数求取及应用

针对具有垂直对称轴的横向各向同性(VTI)介质,研究了多波速度与地层各向异性系数之间的关系。采用适应大偏移距以及强各向异性介质的双平方根方程,进行速度和各向异性系数分析,并将批量计算与交互解释相结合,实现了高精度各向异性介质多波速度与各向异性系数提取,并形成了一套利用多波地震资料求取地震波纵、横波速度及各向异性系数的方法和软件。所求取的参数可用于多波地震资料处理,提高多波资料的成像质量,也可为地层地质解释提供参考。实际资料的应用效果证明了该方法和软件的正确性及有效性。     

Simulation of groundwater level recovery in abandoned mines,Fengfeng coalfield,China

Abandoned mines are of high potential risk as they could be a large underground storage of pollutants(heavy metals and organic wastes, etc.). Various physical, chemical and biological reactions would take place when groundwater flows into underground spaces, which makes abandoned mine a huge potential hazard to groundwater environment. The recovery of groundwater level is one of the key elements controlling the reactions and causing such hazards. This paper simulated groundwater level recovery processes in the abandoned mines, Fengfeng coalfield by using the computer program FEFLOW. The paper integrated the pipe flow model, "three zones" model and groundwater inrush(discharge) model in the simulation of groundwater in the complex laneway-aquifer system. Groundwater flow in the laneway systems was considered pipe flow and described in Bernoulli equation. The water-bearing medium(coal seam roof) overlying the laneway systems was divided into "three zones" composed of the caving zone, fissure zone and bending zone based on the disruption degrees of previous mining. Groundwater in the Ordovician limestone aquifer(bottom of coal seam) flowing into laneway systems was considered a major inrush/recharge source, and its flow rate was calculated by an inrush(discharge) model which was newly developed in this study and incorporated into FEFLOW. The results showed that it would take approximately 95 days for groundwater in abandoned mines to recover to regional groundwater level elevation, and the total amount of water filling up would be about 1.41195×10~7 m~3, which is consistent with the actual data. The study could be of theoretical and practical significance to mitigate abandoned mines' hazards and improve mine groundwater utilization.     

基于BISQ模型双相各向同性介质中地震波数值模拟

基于BISQ机制,推导了双相各向同性介质中弹性波数值模拟方程,并借助交错网格有限差分方法进行了波场模拟。证实了三种波(快纵波、慢纵波、横波SV)的存在和波场特征;在合成地震记录中,观测列三种波的反射,由于各种波相互之间的转换,转换波在地震记录中显示也很清楚,这使得波场变得更为复杂化。     

Transient bifurcation condition of partially saturated porous media at finite strain

Bifurcation of unsaturated soils into a localized shear band is a ubiquitous failure mode of partially saturated soils. The density and degree of saturation have major impacts on the inception of localized deformations in unsaturated soils. Unsaturated fluid flow may dramatically change the density and degree of fluid saturation of unsaturated soils. Therefore, the unsaturated fluid flow is a potential trigger for shear banding in such materials. In this paper, we derive a simplified bifurcation condition of localized deformation in unsaturated soils under the local transient condition at finite strain. This transient bifurcation condition is implemented into a nonlinear finite element code to study the inception of localized deformation in unsaturated soil specimens. Numerical simulations are conducted to study the impact of soil fabrics of density, a ‘bonding’ variable, and intrinsic permeability on the inception of localized failures via the transient bifurcation criterion. Mesh sensitivity analysis is performed to demonstrate the viscosity effect of unsaturated fluid flow on the localized deformation. Numerical simulations demonstrate that the transient bifurcation condition can detect the localized deformation triggered by the internal unsaturated fluid flow process in unsaturated soils. Copyright © 2016 John Wiley & Sons, Ltd.     

多孔介质非饱和导水率预测的分形模型

多孔介质非饱和导水率是地下水污染预测与评价的重要参数。根据分形几何的基本原理和方法,推导出了与Campbell经验公式在形式上完全一致的多孔介质非饱和导水率的预测公式。公式中的幂指数为介质孔隙分维和随机行走分维的函数,分别体现了多孔介质的静态性质与动态性质对其中水分运动的影响,但静态性质的影响是主要的,即导水率主要受多孔介质的结构控制。根据文献中报道的大量数据,利用笔者推导的预测公式计算得到的幂指数的统计值与试验测定的幂指数的统计值基本一致,说明推导的理论公式预测多孔介质非饱和导水率是较为可靠的。     

多孔介质中含均相/非均相反应传质过程数值模拟

结合化学反应方程式,并应用多孔多相介质溶混污染物输运过程的数值模型,对多孔多相介质中含均相/非均相化学反应传质过程进行了数值模拟。化学反应主要包含均相快速/慢速和非均相快速/慢速等5种化学反应过程,溶质输运行为的控制机制主要考虑对流、扩散及降解、吸附等。基于原有的隐式特征线Galerkin离散化的有限元方法,求解模型控制方程的边值初值问题,求解过程中把均相化学反应物质中按照反应物和生成物分开,非均相反应物质按照固相和液相分开,对均相反应物及非均相液相物质浓度耦合求解,而均相生成物和非均相固相物质独立求解。使方程组按照其不同类型进行分类,同时可减少未知数的个数。对于含有非线性内状态变量的右端项进行迭代求解。数值例题结果验证了所提出的数值方法的有效性、计算精度和稳定性。     

关于波浪作用下粉土质海床中共振现象的解释

本文详细讨论了粉土质床在波浪作用下所呈现共振现象的力学机制。利用有限深海床下波浪载荷对土层响应的研究，系统地比较了理论计算结果和实验结果。提出在波浪作用下粉土质土层中存在着一硬土层，从而引发Ｂｒａｇｇ共振。     

采用复合单元法模拟裂隙多孔介质变饱和流动

采用复合单元法建立了模拟裂隙多孔介质变饱和流动的数值模型。该模型具有以下特点:裂隙不需要离散成特定单元,而是根据几何位置插入到孔隙基质单元中形成复合单元;在复合单元中,分别建立裂隙流和孔隙基质流的计算方程,二者通过裂隙-基质界面产生联系并整合成复合单元方程;复合单元方程具有和常规有限单元方程相同的格式,因此,可以使用常规有限单元方程的求解技术。采用欠松弛迭代、集中质量矩阵以及自适应时步调节等技术,开发了裂隙多孔介质变饱和流动计算程序。通过模拟一维干土入渗和复杂裂隙含水层内的流动问题,验证了该模型的合理性和适用性。模拟结果为进一步认识非饱和裂隙含水层地下水流动特性提供了理论依据。     

九寨沟“8.8”地震背景下火花海钙华坝体无损探测分析

为研究震后九寨沟钙华景区的溶洞、裂隙、暗流等地质特性,丰富钙华景区岩溶洞穴无损探测技术,探讨了多物探技术在多孔疏松钙华地区作业的可靠性。首次运用地质雷达法及高密度电法相结合的无损探测技术,在九寨沟景区火花海特定区域进行了现场勘查和无损探测试验。结合对比两种无损探测成果与测区内出露地质剖面3组勘探数据,结果发现：高密度电法与地质雷达法相结合,两者能优劣互补,相互佐证,在解决钙华区域浅部溶洞、暗流、裂隙等工作中,对探测目标体具有极高的识别度。两种方法探测数据与震后出露剖面地质特征保持极高的一致性,验证了两种无损检测方法在多孔疏松介质条件下数据的真实可靠性,解决了多物探技术在多孔疏松介质地区施工的疑点和难点,丰富了工程物探领域技术。     

高放废物处置库选址中低渗透介质地质研究的几个问题

低渗透介质是阻碍有害物质在地下迁移良好的天然屏障, 因此成为高放废物处置库围岩类型的首选。本文通过对高放废物处置库选址中地质研究的回顾, 阐述了低渗透介质地质研究的特点, 对地质参数测定、取样、水流模拟、地球化学模拟进行了重点介绍。