Collapse assessment of moment frame buildings,considering vertical ground shaking

While many cases of structural damage in past earthquakes have been attributed to strong vertical ground shaking, our understanding of vertical seismic load effects and their influence on collapse mechanisms of buildings is limited. This study quantifies ground motion parameters that are capable of predicting trends in building collapse because of vertical shaking, identifies the types of buildings that are most likely affected by strong vertical ground motions, and investigates the relationship between element level responses and structural collapse under multi‐directional shaking. To do so, two sets of incremental dynamic analyses (IDA) are run on five nonlinear building models of varying height, geometry, and design era. The first IDA is run using the horizontal component alone; the second IDA applies the vertical and horizontal motions simultaneously. When ground motion parameters are considered independently, acceleration‐based measures of the vertical shaking best predict trends in building collapse associated with vertical shaking. When multiple parameters are considered, Housner intensity (SI), computed as a ratio between vertical and horizontal components of a record (SI_V/SI_H), predicts the significance of vertical shaking for collapse. The building with extensive structural cantilevered members is the most influenced by vertical ground shaking, but all frame structures (with either flexural and shear critical columns) are impacted. In addition, the load effect from vertical ground motions is found to be significantly larger than the nominal value used in US building design. Copyright © 2016 John Wiley & Sons, Ltd.     

底层带支撑异型柱框架非线性地震反应分析

本文利用ＤＲＡＩＮ－２Ｄ程序对底层带支撑异型柱框架进行了时程分析，并且与无支撑异型柱框架及通高设支撑异型柱框架进行了比较分析，结果表明，笔者提出的底层带支撑异型柱框架是一种良好的结构形式。     

Seismic performance improvement of Special Truss Moment Frames using damage and energy concepts

Nowadays, one of the most important methodologies to reduce the destructive effects of severe earthquakes on structures is the use of energy dissipation devices (EDDs). In this paper, a new configuration of special truss moment frame (STMF) systems including EDDs is theoretically proposed to improve their seismic performance. Such an improvement is achieved by provision of bending performance in these frames. For this purpose, the devices called buckling resistant braces (BRBs) are located at the side of beam‐column connections as the top and bottom members of truss‐girders. In this context, a five‐bay nine‐story STMF is designed using the damage and energy concepts recently proposed in the literature. To show the effectiveness of the proposed system with respect to the similar recently presented STMFs, this frame is then subjected to non‐linear static and non‐linear time‐history analyses under several ground motion records in order to survey on its seismic performance. Subsequently, such engineering demand parameters as lateral displacement, inter‐story drift ratio, overturning moment and shearing forces of stories, residual deformations and maximum time‐history displacement at roof level, as well as the process of plastic hinges formation are investigated. The results show the effectiveness of proposed configuration of EDDs used to improve the seismic safety of STMFs. Copyright © 2014 John Wiley & Sons, Ltd.     

Midbroken reinforced concrete shear frames due to earthquakes. A hysteretic model to quantify damage at the storey level

A nonlinear hysteretic model for the response and local damage analyses of reinforced concrete shear frames subject to earthquake excitation is proposed, and, the model is applied to analyse midbroken reinforced concrete (RC) structures due to earthquake loads. Each storey of the shear frame is represented by a Clough and Johnston hysteretic oscillator with degrading elastic fraction of the restoring force. The local damage is numerically quantified in the domain [0,1] using the maximum softening damage indicators which are defined in closed form based on the variation of the eigenfrequency of the local oscillators due to the local stiffness and strength deterioration. The proposed method of response and damage analyses is illustrated using a sample 5 storey shear frame with a weak third storey in stiffness and/or strength subject to sinusoidal and simulated earthquake excitations for which the horizontal component of the ground motion is modeled as a stationary Gaussian stochastic process with Kanai-Tajimi spectrum, multiplied by an envelope function.     

钢框架结构典型震害的计算机模拟研究

为模拟钢框架结构的典型震害,本文基于ANSYS软件建立了钢框架结构简化模型。该模型可以考虑楼板对钢框架结构整体性能的影响,并且进一步考虑了楼板与钢梁之间的滑移、节点域变形,以及梁柱节点焊缝的断裂等因素。应用本文建立的钢框架结构模型对北岭地震中Blue Cross大厦的震害进行了模拟,与实际震害对比的结果表明,该模型能够比较精确地模拟地震作用下钢框架结构的响应。钢框架结构模型对节点焊缝断裂的钢框架结构震害研究有着重要的意义。     

Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling

The recent large interest in nonlinear seismic analysis methods, static and dynamic, has required proper strategies of modeling based on reliable, and at the same time easy to use, constitutive laws for the structural elements. Regarding the behavior of framed structures, special attention has to be devoted to infills because of the key role they play in modifying overall stiffness, strength and ductility under seismic excitation. Pointing out the attention on this topic the paper discusses a criteria for modeling the structural behavior of infills based on a macromodeling approach, that is to say on the substitution of infills with diagonal pin jointed struts. Is here shown how multilinear plastic link elements governed by a hysteretic Pivot model, available in different FEM codes, can be appropriately used to model the equivalent struts to perform linear or nonlinear analyses. In order to enlarge experimental knowledge on cyclic behavior of infilled frames structures and as reference for developing the above mentioned modeling strategy, an experimental campaign on single-storey, single-bay, fully infilled frames with different kinds of masonry and subjected to lateral cyclical loads, was carried out, and some others available in the literature are referred to. Validation of Pivot modeling approach was carried out comparing experimental results and computer simulations of the experimental tests. In the paper hysteresis parameters values calibrating Pivot law are also given for involved masonry infills typologies and some proposals for correlation between strength and stiffness of infilled frames and of masonry infills are provided as a tool for the quick calibration of the Pivot model in practical applications.     

Mathematical modelling of an infilled RC frame structure based on the results of pseudo‐dynamic tests

In this paper, a technique is presented which employs the results of pseudo‐dynamic tests for the development of a mathematical model. This technique, described by means of the mathematical modelling of a three‐storey reinforced concrete frame building with infill in the bottom two storeys, which was tested at ELSA in Ispra, proved to be effective and to lead to a fairly accurate structural model. The results of analyses suggest that the global non‐linear seismic response of reinforced concrete frames with masonry infill can be adequately simulated by a relatively simple mathematical model, which combines beam elements with concentrated plasticity, simple connection elements, and equivalent strut elements representing the infill walls (provided that the infill does not fail out of plane and that no shear sliding failure occurs). Copyright © 2002 John Wiley & Sons, Ltd.     

支护开挖基底抗隆起的概率分析

基底隆起导致墙后土体位移是基坑失稳的模式之一。本文在分析了引起基底隆起的因素之后，对土性参数的变异特性和分布特征进行了研究。结合上海地区的工程实践，采用极限状态设计方法，对引起基底隆起的因素进行了评价。     

Dispersions for the pushover‐based risk assessment of reinforced concrete frames and cantilever walls

The paper presents the results of an investigation into the dispersion values, expressed in terms of limit‐state spectral accelerations, which could be used for the pushover‐based risk assessment of low‐height to mid‐height reinforced concrete frames and cantilever walls. The results of an extensive parametric study of a portfolio of test structures indicated that the dispersion values due to record‐to‐record variability and modelling uncertainty (β_LS,RU) are within the range from 0.3 to 0.55 for the near collapse limit state, and between 0.35 and 0.60 for the collapse limit state. The dispersions β_LS,RU proposed for the code‐conforming and the majority of old (non code‐conforming) frames are in between these values. On the other hand, the dispersions proposed for the old frames with a soft storey and an invariant plastic mechanism, and for the code‐conforming cantilever walls, are at the lower and upper bounds of the presented values, respectively. The structural parameters that influence these dispersions were identified, and the influence of different ground motion sets, and of the models used for the calculation of the rotation capacities of the columns, on the calculated fragility parameters was examined and quantified. The proposed dispersion values were employed in a practice‐oriented pushover‐based method for the estimation of failure probability for eight selected examples. The pushover‐based risk assessment method, although extremely simple and economical when compared with more rigorous probabilistic methods, was able to predict seismic risk with reasonable accuracy, thus showing it to be a practical tool for engineers. Copyright © 2016 John Wiley & Sons, Ltd.     

组合墙结构房屋抗震性能的振动台试验研究

通过三个组合墙模型房屋的振动台试验，分析了组合墙结构体系房屋的动力性能和抗震能力，比较了底一层和底两层框架组合墙房屋和普通组合墙房屋的抗震性能。结果表明，八层组合墙房屋的抗震能力远远超过设计能力，可用于八度地区，底框架组合墙房屋的抗震性能优于普通组合墙房屋，底两层框架组合墙房屋也优于底一层框架组合墙房屋。