Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd.     

Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces

Seismic tests have been conducted on two 3‐storey structures protected with pressurized fluid‐viscous spring damper devices. One of the structures was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method, which allowed the use of large and full‐size specimens, and by implementing a specific compensation strategy for the strain‐rate effect at the devices. The test results allowed the verification of the adequacy of the attachment system as well as the comparison of the behaviour of the unprotected buildings with several protected configurations, showing the benefits of the application of the devices and the characteristics of their performance. The response of the protected structures was always safer than that of the unprotected ones mainly due to a significant increase of equivalent damping. The increase in the damping ratio depends on the level of deformation. Copyright © 2004 John Wiley & Sons, Ltd.     

Sediment deposition in the flood plain of Stemple Creek Watershed, northern California

Over the past 150 years, major land use changes have occurred in the Stemple Creek Watershed in northern California that have caused erosion to move soils from the upland to the flood plain, stream channels, and the bay. The purpose of this study is to document the recent (1954 to present) sediment deposition patterns in the flood plain area adjacent to Stemple Creek using the ¹³⁷Cesium technique. Sediment deposition ranged from 0.26 to 1.84 cm year⁻¹ for the period from 1964 to 2002 with an average of 0.85±0.41 cm year⁻¹. Sediment deposition rates were higher for the 1954 to 1964 period with a range of 0.31–3.50 cm year⁻¹ and an average of 1.29±1.04 cm year⁻¹. These data indicate that sediment deposition in the flood plain has decreased since the middle 1950s, probably related to reduction in row crop agriculture and an increase in pasturelands. This study shows that the flood plains in the Stemple Creek Watershed are a significant sink for the soils being eroded from the upland area. Given the significance of the flood plain for trapping eroded materials before they reach the stream channels or the bay, efforts need to be made to manage these flood plain areas to insure that they do not change and become a source rather than a sink for eroded materials as improved management practices on the upland areas reduce sediment input to the flood plain.     

Modeling Spatially and Temporally Complex Land‐Cover Change: The Case of Western Honduras*

This article presents an econometric analysis of land‐cover change in western Honduras. Ground‐truthed satellite image analysis indicates that between 1987 and 1996 net reforestation occurred in the 1,015‐km² study region. While some reforestation can be attributed to a 1987 ban on logging, the area of reforestation greatly exceeds that of previously clear‐cut areas. Further, new area was also deforested between 1987 and 1996. Thus, the observed land‐cover changes represent a complex mosaic of changing land‐use patterns across time and space. The analysis contributes to the literature on land‐cover change modeling in that: (1) it compares two econometric approaches to capture complex and often bidirectional changes in land cover from 1987 to 1996 as a function of agricultural suitability and transportation costs, and (2) it addresses techniques to identify and correct for spatial autocorrelation in a categorical regression framework.     

In the Critical Zone: Geography at the U.S. Geological Survey

Geography is again becoming an integral part of the premier natural‐science agency of the federal government. Geographic research emphasizes the surface of the earth, a portion of the earth system that the U.S. Geological Survey (USGS) defines as the “critical zone.” Although geography was part of the USGS from the creation of the agency, in recent years geography in the agency has largely been limited to topographic mapping. Recently, the USGS and an advisory committee of the National Research Council (NRC) reviewed the role of geography at the Survey. The committee's report, along with ongoing decision‐making in the federal government, is likely to reshape geography in the USGS. The newly defined USGS has a regional structure and four disciplines: geology, hydrology, biology, and geography. The NRC report emphasizes the need for the creation of a spatial database called the National Map to replace the existing series of paper topographic maps. The report also outlines the need for geographic research in geographic information science (GIScience), nature‐society connections, and bridging of science to decision‐making. The NRC report has been briefed throughout the USGS, in the federal executive branch, and in Congress. The changing role for geography in the USGS requires change in the agency culture, revised budgetary decisions, and the establishment of a long‐term core agenda for research. Academic geographers will need to prepare a new generation of geographers for participation in the USGS and similar agencies.     

Short‐term intertidal bar mobility on a ridge‐and‐runnel beach,Merlimont, northern France

Digital elevation models and topographic pro?les of a beach with intertidal bar and trough (ridge‐and‐runnel) morphology in Merlimont, northern France, were analysed in order to assess patterns of cross‐shore and longshore intertidal bar mobility. The beach exhibited a pronounced dual bar–trough system that showed cross‐shore stationarity. The bars and troughs were, however, characterized by signi?cant longshore advection of sand under the in?uence of suspension by waves and transport by strong tide‐ and wind‐driven longshore currents. Pro?le changes were due in part to the longshore migration of medium‐sized bedforms. The potential for cross‐shore bar migration appears to be mitigated by the large size of the two bars relative to incident wave energy, which is modulated by high vertical tidal excursion rates on this beach due to the large tidal range (mean spring tidal range = 8·3 m). Cross‐shore bar migration is also probably hindered by the well‐entrenched troughs which are maintained by channelled high‐energy intertidal ?ows generated by swash bores and by tidal discharge and drainage. The longshore migration of intertidal bars affecting Merlimont beach is embedded in a regional coastal sand transport pathway involving tidal and wind‐forced northward residual ?ows affecting the rectilinear northern French coast in the eastern English Channel. Copyright © 2004 John Wiley & Sons, Ltd.     

Knickpoint recession rate and catchment area: the case of uplifted rivers in Eastern Scotland

Knickpoint behaviour is a key to understanding both the landscape responses to a base‐level fall and the corresponding sediment fluxes from rejuvenated catchments, and must be accommodated in numerical models of large‐scale landscape evolution. Knickpoint recession in streams draining to glacio‐isostatically uplifted shorelines in eastern Scotland is used to assess whether knickpoint recession is a function of discharge (here represented by its surrogate, catchment area). Knickpoints are identified using DS plots (log slope versus log downstream distance). A statistically significant power relationship is found between distance of headward recession and catchment area. Such knickpoint recession data may be used to determine the values of m and n in the stream power law, E = KA^mSⁿ. The data have too many uncertainties, however, to judge definitively whether they are consistent with m = n = 1 (bedrock erosion is proportional to stream power and KPs should be maintained and propagate headwards) or m = 0·3, n = 0·7 (bedrock incision is proportional to shear stress and KPs do not propagate but degrade in place by rotation or replacement). Nonetheless, the E Scotland m and n values point to the dominance of catchment area (discharge) in determining knickpoint retreat rates and are therefore more consistent with the stream power law formulation in which bedrock erosion is proportional to stream power. Copyright © 2005 John Wiley & Sons, Ltd.     

Postglacial topographic evolution of glaciated valleys: a stochastic landscape evolution model

The retreat of valley glaciers has a dramatic effect on the stability of glaciated valleys and exerts a prolonged influence on the subsequent fluvial sediment transport regime. We have studied the evolution of an idealized glaciated valley during the period following retreat of ice using a numerical model. The model incorporates a stochastic process to represent deep‐seated landsliding, non‐linear diffusion to represent shallow landsliding and an approximation of the Bagnold relation to represent fluvial sediment transport. It was calibrated using field data from several recent surveys within British Columbia, Canada. We present ensemble model results and compare them with results from a deterministic linear‐diffusion model to show that explicit representation of large landslides is necessary to reproduce the morphology and channel network structure of a typical postglacial valley. Our model predicts a rapid rate of fluvial sediment transport following deglaciation with a subsequent gradual decline, similar to that inferred for Holocene time. We also describe how changes in the model parameters affect the estimated magnitude and duration of the paraglacial sediment pulse. Copyright © 2005 John Wiley & Sons, Ltd.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.