深基坑边坡滑塌锚拉钢管桩补救技术

通过对某大厦深基坑边坡失稳事故原因的分析，介绍了粉喷桩，锚拉钢管桩补救设计施工技术及效果。     

海洋工程中桩基水平向承载力可靠指标的影响因素分析

桩基础水平向承载力的计算是海洋工程中桩基设计的重要组成部分。论文在搜集了大量平台建设资料的基础上,以现有的桩基水平向承载力的设计计算方法为依据,进行了水平向承载力的可靠度研究。对影响可靠指标的各个因素进行了灵敏度分析。     

交流变频调速CD-2B型岩心钻机的研制

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。     

加载次序引起的负摩阻力桩摩阻力分布的变化

简要分析了加载次序对于负摩阻力桩基桩土相互作用影响的机理。采用有限元方法计算比较了这种差异。计算结果表明,加载次序的变化会引起桩身摩阻力分布、中性点位置和下拉力的变化。桩身摩阻力的分布差异主要是桩身上部负摩阻力的大小,负摩阻力先出现时的负摩阻力值较小,这种状况在各级桩顶荷载下不会改变。负摩阻力先出现时,中性点的位置比较低,两者的差距随着桩顶荷载的增大而变得加大。负摩阻力先出现时下拽力小于桩顶荷载先施加的情况。这对于负摩阻力桩基检测的研究和应用是有益的。     

半周期自修正防弯钻具（XBZX）的研制与应用

针对深孔钻探中钻孔弯曲问题,研制了半周期自修正防弯钻具（XBZX）。该钻具采用杠杆工作原理,结构简单。经过多个钻孔应用实践证明,使用该钻具能有效降低钻孔弯曲,并且在许多造斜地层的钻孔施工中取得了良好效果。     

High spatial-resolution monitoring to investigate nitrate export and its drivers in a mesoscale river catchment along an anthropogenic land-cover gradient

Nitrate monitoring is commonly conducted with low-spatial resolution, only at the outlet or at a small number of selected locations. As a result, the information about spatial variations in nitrate export and its drivers is scarce. In this study, we present results of high-spatial resolution monitoring conducted between 2012 and 2017 in 65 sub-catchments in an Alpine mesoscale river catchment characterized by a land-use gradient. We combined stable isotope techniques with Bayesian mixing models and geostatistical methods to investigate nitrate export and its main drivers, namely, microbial N turnover processes, land use and hydrological conditions. In the investigated sub-catchments, mean values of NO₃⁻ concentrations and its isotope signatures (δ¹⁵N_NO3 and δ¹⁸O_NO3) varied from 2.6 to 26.7 mg L⁻¹, from −1.3‰ to 13.1‰, and from −0.4‰ to 10.1‰, respectively. In this study, land use was an important driver for nitrate export. Very strong and strong positive correlations were found between percentages of agricultural land cover and δ¹⁵N_NO3, and NO₃⁻ concentration, respectively. Mean proportional contributions of NO₃⁻ sources varied spatially and seasonally, and followed land-use patterns. The mean contribution of manure and sewage was much higher in the catchments characterized by a high percentage of agricultural and urban land cover comparing to forested sub-catchments. Specific NO₃⁻ loads were strongly correlated with specific discharge and moderately correlated with NO₃⁻ concentrations. The nitrate isotope and concentration analysis results suggest that nitrate from external sources is stored and accumulated in soil storage pools. Nitrification of reduced nitrogen species in those pools plays the most important role for the N-dynamics in the Erlauf river catchment. Consequently, nitrification of reduced N sources was the main nitrate source except for a number of sub-catchments dominated by agricultural land use. In the Erlauf catchment, denitrification plays only a minor role in controlling NO₃⁻ export on a regional scale.     

煤田深孔补采煤心施工技术

在煤田岩心钻探孔施工中,经常会出现丢失煤层现象,必须补采煤心,以满足地质设计要求和有关煤田地质规程。在河南省禹州市张得煤田矿区的钻探施工中,摸索并掌握了一套深孔补采煤心的施工技术,利用偏心楔补打斜孔,有效解决了深孔（1000 m以下）补采煤心的问题,并完全满足地质设计要求。     

港湾广场（一期）深基坑变形监测与分析

深基坑施工变形监测是信息化施工的重要内容,以广州港湾广场(一期)深基坑工程为例,通过对开挖过程中土体水平位移、支护结构侧向位移、支护结构内应力、沉降等监测,结合围护结构的强度检测,采用反演分析对基坑变形进行数值模拟,预测不同开挖深度时基坑的位移变形量,实际监测结果与预测值基本一致,为基坑的设计和施工提供可靠的依据。     

富水破碎岩体注浆加固材料试验研究与应用

针对富水破碎地层注浆治理过程中传统水泥类材料难以实现注浆加固和堵水同步进行的难题,以硫铝酸盐水泥熟料和钢渣微粉为主要原材,成功制备了一种水泥基复合注浆材料（CGM）。通过与传统水泥材料进行性能对比试验,采用扫描电镜和X射线测试手段,分析了CGM材料制备工艺、组分含量和浆液制备条件对材料性能的作用规律,并检验了CGM材料的工程适用性。结果表明：CGM材料宜采用混合粉磨制备工艺,可显著提高其水化活性,且粉磨时间应不超过45 min。钢渣微粉含量越高,水灰比越大,结石体强度越低,凝结时间越长,水灰比超过1.2:1时,结石体后期会出现干缩。与传统水泥材料相比,CGM材料浆液凝结时间与黏度的环境敏感度低,具有显著的工程适用性和性能优越性。     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.