GPS高程拟合技术在兵团新建58团1/1万航测外业中的应用

介绍了用GPS定位技术在兵团农三师新建58团1/1万航测地形图测绘外业像控点高程拟合精度,经实地用水准仪采用几何测量检查GPS拟合点的高程,证明GPS高程拟合精度与已如点的数量、精度和位置有关,其中已知点的分布对其影响最大,对于一定面积的小比例尺的航外像控测量,当已知点均匀分布于整个测区时,GPS拟合的高程可满足像控点精度要求。     

工程常用坐标转换方法研究与分析

介绍了工程中常用的几种坐标转换方法,并开发程序对各种方法进行了试验分析,针对不同情况下的坐标转换问题,提出了一些解决方案。     

RTK在大比例尺地形图航测数字化测图中的应用

结合某开发区1：2000地形图航测数字化测图工程，探讨了采用GPSRTK的自由基站二步法拟合方式测量航外像控点（平高点），实施大比例尺地形图野外检测的可行性。对比测量实验表明，该方式在像控点要求的特定位置不仅能保证平面精度，也可以保证高程精度；与常规的RTK相比，该方式具有基站设置位置灵活、不需单独提前解算基准转换参数，以及显著提高工效等优点。     

利用CloudSat资料分析青藏高原、高原南坡及南亚季风区云高度的统计特征量

云与辐射的相互作用对全球的天气和气候变化过程有着重要的影响,不同高度的云有着不同的辐射强迫,获得云体高度及其在时空上的变化对研究全球气候的变化有着重要意义。本文利用云卫星上的云廓线雷达(CloudSat/CPR)2006年6月—2007年12月期间的资料,对比分析了青藏高原、高原南坡和南亚季风区域不同云类的云顶、云底高度和云厚统计量。结果表明,在所研究区域单位面积上的云顶和云底高度变化具有一定的时空连续性,不同云类的云顶和云底高度存在不同的变化范围,且随着季节的改变均有明显的变化;同时各区域不同云类的云体厚度在夏季较大,冬季较小;各区域不同云类所占的比例(云量)也具有一定的季节变化规律。     

基于MODIS资料的中国东部时间序列空气动力学粗糙度和零平面位移高度估算

空气动力学粗糙度和零平面位移高度是很多气候模型和陆面模式中的重要参数,采用气象学方法推导这两个参数对于大范围长时间序列的计算需要大量长期的野外观测,而遥感方法可以快速经济的提供大范围数据,在本研究中采用形态学模型,以MODIS产品数据作为数据源,计算植被冠层面积指数,估算了中国东部2001-2003年归一化到植被高度的...     

结合第8届国际探空仪系统比对试验探讨国产气球施放高度

根据阳江探空站高空气象探测用750g气象气球施放的实际高度的现状,结合中国大探中心组织国产GPS探空仪在阳江用国产2000g气象气球比对试验时施放的高度以及广东阳江第8届国际探空仪系统比对期间施放的实际高度,探讨雨天和高空相对湿度较大的气象条件下对国产气象气球施放高度的影响。结果显示,雨天或高空相对湿度较大时,对国产现有的气象气球施放的高度存在较大的影响。研究表明,解决了国产气象气球的球皮防雨、防潮问题,很大程度上解决了国产气象气球施放高度不稳定的难题。     

Calculation Of The Height Of The Stable Boundary Layer In Practical Applications

Currently used and newly proposed calculation techniques for the heightof the stable boundary layer (SBL), including the bulk-Richardson-numbermethod, diagnostic equations for the equilibrium SBL height, and a relaxation-typeprognostic equation, are discussed from the point of view of their physical basis andrelevance to experimental data. Among diagnostic equations, the best fit to data exhibits an advanced Ekman-layer height model derived recently with due regard to the role of the free-flow stability. Its extension to non-steady regimes provides a prognostic equation recommended for use in practical applications.     

Estimates of Roughness Parameters for Arrays of Obstacles

Some methods are evaluated and extended to estimate roughness length and zero plane displacement height for atmospheric flow over arrays of obstacles, typically buildings. It appears that the method proposed by Bottema, with an extension to account for low density obstacle arrays, performs best. Procedures are proposed to represent irregular obstacle arrangements by a representative regular array to which Bottema's method can be applied. It is shown that this can be done without loss of accuracy, in general, roughness length can be predicted within a factor of two in more than 74% of the cases (95% reliability estimate). The methods proposed by Lettau and Raupach have been included in the evaluation. Lettau's model, which only requires input on the frontal area density, predicts roughness length unbiassed for frontal area densities up to 0.3, but predictions will be within a factor of two in more than 59% of the cases only (95% reliability estimate).     

L波段雷达探空高度评估及其质量标识

以美国NCEP FNL分析数据和我国GRAPES_GFS预报数据为背景场,对2016年7月1日-2017年6月30日北京探空站的L波段秒级探空位势高度（探空高度）从观测余差、平均偏差、标准偏差、概率密度分布、峰度系数、偏度系数、相关系数和均方根误差等参数进行误差分析。根据分析结果对探空高度进行质量标识,并根据质量标识的结果再次求解参数,评估质量标识效果。结果表明:探空高度质量较好,无论是基于NCEP FNL还是GRA-PES_GFS,探空高度的误差基本在±5 dagpm以内。探测高层的观测余差平均偏差和标准偏差表明基于GRAPES_GFS的评估优于NCEP FNL的评估。单一个例选取的可疑点和错误点阈值具有误差特征、自适应的特点。     

Turbulent fluxes from Helipod flights above quasi-homogeneous patches within the LITFASS area

Turbulent fluxes of sensible and latent heat were measured with the helicopter-borne turbulence probe Helipod over a heterogeneous landscape around the Meteorological Observatory Lindenberg during the STINHO-2 and LITFASS-2003 field experiments. Besides the determination of area-averaged heat fluxes, the analysis focused on different aspects of the response of the turbulent structure of the convective boundary layer (CBL) on the surface heterogeneity. A special flight pattern was designed to study flux profiles both over quasi-homogeneous sub-areas of the study region (representing the major land use types—forest, farmland, water) and over a typical mixture of the different surfaces. Significant differences were found between the heat fluxes over the individual surfaces along flight legs at about 80 m above ground level, in agreement with large-aperture scintillometer measurements. This flux separation was still present during some flights at levels near the middle of the CBL. Different scales for the blending height and horizontal heterogeneity were calculated, but none of them could be identified as a reliable indicator of the mixing state of the lower CBL. With the exception of the flights over water, the latent heat flux measurements generally showed a larger statistical error when compared with the sensible heat flux. Correlation coefficients a nd integral length scales were used to characterise the interplay between the vertical transport of sensible and latent heat, which was found to vary between ‘fairly correlated’ and ‘decoupled’, also depending on the soil moisture conditions.