巴楚-伽师Ms6.8地震地磁异常特点分析

通过分析、比较1996--2003年喀什地震台站记录到的新疆伽师及附近地区发生的多次6级地震的地磁前兆异常特征，发现在这几组地震活动过程中喀什地震台的地磁表现出不同的异常特征，说明与地震破裂特征有更深层次的相关性，且地磁响应比异常和总强度差值异常在一定程度上反映了台站周围小范围的震源区介质电性结构的变化。巴楚-伽师6．8级地震前地磁异常特征并不十分突出，有别于1996—1998年伽师强震群震前地磁异常量较丰富的特点。     

多相地貌单元场地勘察中基岩与卵砾石、孤石的鉴别

在多相地貌单元场地勘察中，基岩与卵砾石的鉴别难度较大。应利用初步感性认识、钻进状态、岩样特征等多手段对基岩与卵砾石进行判别，以提高判别率。     

粉喷桩处理软基的变形及固结测试分析

以广珠准高速铁路软土路堤试验粉喷桩处理段的变形及孔压测试数据为基础 ,对用粉喷桩处理深厚软土地基的沉降、基底横向差异沉降、边桩变形、孔压分布规律及固结进行了分析     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

Design Earthquakes in the U.K.

Three sites in the UK are taken, representative of low, medium and high hazard levels (by UK standards). For each site, the hazard value at 10⁻⁴ annual probability is computed using a generic seismic source model, and a variety of ground motion parameters: peak ground acceleration (PGA), spectral acceleration at 10 Hz and 1 Hz, and intensity. Disaggregation is used to determine the nature of the earthquakes most likely to generate these hazard values. It is found (as might be expected) that the populations are quite different according to which ground motion parameter is used. When PGA is used, the result is a rather flat magnitude distribution with a tendency to low magnitude events (\le 4.5 ML) which are probably not really hazardous. Hazard-consistent scenario earthquakes computed using intensity are found to be in the range 5.8–5.9 ML, which is more in accord with the type of earthquake that one expects to be a worst-case event in the UK. This revised version was published online in July 2006 with corrections to the Cover Date.     

A coherency function model of ground motion at base rock corresponding to strike-slip fault

IntroductionEarthquakedamagesurveyandresearchresultshavedemonstratedthatspatialdistributiondifferenceofgroundmotionisoneoftheimportantreasonswhichcausedlongstructure(eglongspanbridge,undergroundpipe)destroy.Thathowtoprovideareasonableinputofgroundmotionfieldforaseismicdesignoflongstructureisaurgentprobleminearthquakeengineeringfield.Atpresent,themethodtostudyspatialvariationofgroundmotionsisadoptingstatisticanalysisbasedondensearrayrecordssuchasSMART-1array,etc,togetcoherencyfunctionofground…     

A patch hierarchy approach to modeling surface and subsurface hydrology in complex flood‐plain environments

Geomorphology interacts with surface‐ and ground‐water hydrology across multiple spatial scales. Nonetheless, hydrologic and hydrogeologic models are most commonly implemented at a single spatial scale. Using an existing hydrogeologic computer model, we implemented a simple hierarchical approach to modeling surface‐ and ground‐water hydrology in a complex geomorphic setting. We parameterized the model to simulate ground‐ and surface‐water ?ow patterns through a hierarchical, three‐dimensional, quantitative representation of an anabranched montane alluvial ?ood plain (the Nyack Flood Plain, Middle Fork Flathead River, Montana, USA). Comparison of model results to ?eld data showed that the model provided reasonable representations of spatial patterns of aquifer recharge and discharge, temporal patterns of ?ood‐water storage on the ?ood plain, and rates of ground‐water movement from the main river channel into a large lateral spring channel on the ?ood plain, and water table elevation in the alluvial aquifer. These results suggest that a hierarchical approach to modeling ground‐ and surface‐water hydrology can reproduce realistic patterns of surface‐ and ground‐water ?ux on alluvial ?ood plains, and therefore should provide an excellent ‘quantitative laboratory’ for studying complex interactions between geomorphology and hydrology at and across multiple spatial scales. Copyright © 2004 John Wiley & Sons, Ltd.     

An attenuation model for distant earthquakes

Large magnitude earthquakes generated at source–site distances exceeding 100km are typified by low‐frequency (long‐period) seismic waves. Such induced ground shaking can be disproportionately destructive due to its high displacement, and possibly high velocity, shaking characteristics. Distant earthquakes represent a potentially significant safety hazard in certain low and moderate seismic regions where seismic activity is governed by major distant sources as opposed to nearby (regional) background sources. Examples are parts of the Indian sub‐continent, Eastern China and Indo‐China. The majority of ground motion attenuation relationships currently available for applications in active seismic regions may not be suitable for handling long‐distance attenuation, since the significance of distant earthquakes is mainly confined to certain low to moderate seismicity regions. Thus, the effects of distant earthquakes are often not accurately represented by conventional empirical models which were typically developed from curve‐fitting earthquake strong‐motion data from active seismic regions. Numerous well‐known existing attenuation relationships are evaluated in this paper, to highlight their limitations in long‐distance applications. In contrast, basic seismological parameters such as the Quality factor (Q‐factor) could provide a far more accurate representation for the distant attenuation behaviour of a region, but such information is seldom used by engineers in any direct manner. The aim of this paper is to develop a set of relationships that provide a convenient link between the seismological Q‐factor (amongst other factors) and response spectrum attenuation. The use of Q as an input parameter to the proposed model enables valuable local seismological information to be incorporated directly into response spectrum predictions. The application of this new modelling approach is demonstrated by examples based on the Chi‐Chi earthquake (Taiwan and South China), Gujarat earthquake (Northwest India), Nisqually earthquake (region surrounding Seattle) and Sumatran‐fault earthquake (recorded in Singapore). Field recordings have been obtained from these events for comparison with the proposed model. The accuracy of the stochastic simulations and the regression analysis have been confirmed by comparisons between the model calculations and the actual field observations. It is emphasized that obtaining representative estimates for Q for input into the model is equally important.Thus, this paper forms part of the long‐term objective of the authors to develop more effective communications across the engineering and seismological disciplines. Copyright © 2003 John Wiley & Sons, Ltd.     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.