云南坝子的成因与特征研究

在以山地高原为主、缺乏大平原的云南省,人口、耕地.经济、文化活动的中心主要分布和集中在“坝子”中,“坝子”是云南经济发展的基础,其在国民经济发展中的地位远较其他地貌类型重要. “坝子”常被等同于“山间中小盆地”,但在现实中,“坝子”已远远超出了“山间中小盆地”的范畴,包括成因各异的多种小地貌类型,是对云南省一类较为特殊的小地貌的统称.云南“坝子”一般由地球内力作用形成雏形,再经各种外营力改造而成,其中流水作用和人为地质作用最为重要.因成因不同,“坝子”的形态及特征各异,据此可划分出构造坝、水成坝、冰成坝、火山坝四大成因类型.     

黄土高原发展过程中的五大转折

1 Introduction W hatim portanttransform ations have taken place during the form ation ofthe Loess Plateau in China? Research on this problem has especially im portantscientific significance forus to learn ofthe evolution oftheLoessPlateau and predictthe f…     

滑坡的摩擦力与正压力力偶的地震波场模拟

滑坡的地震波反演是确定滑坡动力学过程的有效途径.然而,目前的滑坡地震波反演大多基于点源模型,将滑坡面近似为点源,仅考虑滑体作用于滑床的摩擦力及其变化.但实际滑坡过程中,由于重力和滑动距离的存在,滑床还受到一个逐渐增加的正压力力偶作用.为定量探讨这一正压力力偶对滑坡地震波场的贡献,我们基于有限滑坡面模型,分别正演模拟了滑坡过程中摩擦力和正压力力偶的地震波场,得到了正压力力偶地震波场在整个滑坡地震波场中的能量比例及其随距离的变化.研究发现,正压力力偶地震波场具备近场项衰减特征,相较于摩擦力波场随距离衰减更快.正演模拟显示,正压力力偶地震波场在滑坡尺度2~3倍距离范围内较为显著;但在更远距离上,由于其幅度大致随距离的平方衰减,其贡献几可忽略.此外,正压力力偶波场在波形特征上与摩擦力波场也存在明显区别,二者的相对大小与摩擦系数和坡度等参数密切相关.本文模拟分析表明,完整的滑坡近场地震波场应该同时考虑摩擦力和正压力力偶的贡献;滑坡动力学参数反演中,利用近场地震波记录,考虑有限尺度的滑坡面,原则上我们不仅可以确定传统滑坡动力学参数,还有可能确定摩擦系数和流体压力等参数在空间上的变化分布.

     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

莱州湾夏季环流垂向结构及其影响机制的研究

完善莱州湾三维环流结构,对进一步认识莱州湾海域的物质输运和生态环境保护具有重要科学意义,但前人对于莱州湾环流三维结构的研究相对较少。本文基于一套高分辨率的海洋数值模式,从三维角度研究了莱州湾夏季8月份环流的气候态特征及其影响机制。数值研究表明,莱州湾夏季环流垂向结构呈现双层环流特征,其中在跨等深线方向,环流的双层结构环流特征比较显著且存在显著的密度锋面结构。动量诊断的结果进一步表明,这种双层结构环流的形成与底层密度锋面所导致的斜压梯度力密切相关。此外,通过量化温盐场对于密度锋面的贡献,本文证实了温度梯度是莱州湾顶的密度锋面的主要影响因素,其对斜压梯度力的贡献占比达到99%,而盐度梯度对于莱州湾中部区域的密度锋面十分重要,对斜压梯度力的贡献占比达到58%,这与夏季黄河所带来的淡水通量密切相关。     

Ice-Induced Fatigue Analysis by Spectral Approach for Offshore Jacket Platforms with Ice-Breaking Cones

The spectral methods and ice-induced fatigue analysis are discussed based on Miner's linear cumulative fatigue hypothesis and S-N curve data.According to the long-term data of full-scale tests on the platforms in the Bohai Sea,the ice force spectrum of conical structures and the fatigue environmental model are established.Moreover,the finite element model of JZ20-2MSW platform,an example of ice-induced fatigue analysis,is built with ANSYS software.The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carried on,and the fatigue life of the structure is estimated in detail.The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.     

河口海岸三维水流数值模型中几种垂向坐标模式研究述评

回顾了近年来国内外河口、近岸海域三维斜压水流数值模式研究的进展,着重讨论了不同垂向坐标下三维水流模式的发展状况以及存在的问题。地形拟合坐标(σ坐标)模式可以很好地拟合床面地形和自由面,已在物理海洋学中被广泛使用。但在地形变化剧烈,尤其在密度层结效应明显的海域,σ坐标模式中的水平压强梯度力误差会引起伪密度流。寻求高精度的数值模式以及更加有效的拟合坐标变换将是值得努力的方向。     

A study of Coriolis effects on long waves propagating in an unbounded ocean, channel and basin

The effects of Coriolis force on long waves have been discussed based on gravity waves propagating in an unbounded ocean, channel and basin. In case of ocean, results show that the Coriolis effect will be significant and negligible, when the wave period is comparable to 2π/f and much shorter, respectively. Results also show in a channel, the wave amplitude and water particle velocity decrease exponentially in the positive y direction in the northern hemisphere (where f is positive). Moreover, in a basin, the Cotidal lines have been found as curves and rotate counterclockwise around the origin.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.