Slow mass movement in the Kangchenjunga area, eastern Nepal Himalaya

Abstract   The rates of the accumulated and continuous displacement of solifluction lobes in the Kangchenjunga area, eastern Nepal Himalaya, were determined using glass fiber tubes and a strain probe. Ground temperature, precipitation and soil moisture were monitored at two sites, whose altitude differed by approximately 100 m, to understand the solifluction process. The average movement rate of the glass fiber tubes on a 31° slope at altitudes of 5412–5414 m a.s.l. was approximately 11 mm/year, being almost threefold greater than that observed on a 22° slope at 5322–5325 ma.s.l. There was no significant difference in the depth of displacement at these sites. The continuous displacement measurement near the ground surface at 5414 m showed permanent downslope movement from early July. Such movement may be attributed to additional moisture supply during the monsoon season. The amplitude of the displacement cycle was highest at the ground surface, and decreased to virtually zero at and below 20 cm in depth. Probable factors leading to the relatively slow rates of downslope displacement at the surface and depth at the studied altitudes are the lack of concurrence of the freeze–thaw cycles and the high moisture condition in the soil, and the low moisture retention capacity of the soil because of steep slopes and superficial desiccation. The rate of displacement may be more pronounced at altitudes above 5600 m because of the freeze–thaw cycles during the summer season.     

锦州地震台体积式钻孔应变仪的映震情况

论述了张北MS6.2、沈阳ML4.1、内蒙古ML5.9、日本北海道MS8.0、俄蒙中交界MS7.9、青海昆仑山MS8.1地震前后,锦州地震台体积式钻孔应变仪观测震前异常的变化规律。通过计算潮汐因子、振幅因子、3点线性平滑滤波残差值等方法,识别异常。结果表明,体应变异常资料与地震有一定的相关性。     

Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.     

Tidal Stress/Strain and the b-values of Acoustic Emissions at the Underground Research Laboratory, Canada

The correlation between the b-values of acoustic emissions (AEs) and the phase of the moon was investigated at the Underground Research Laboratory (URL) in Canada. The same data as those used in Iwata (2002) were examined, which showed that the occurrence of AEs is correlated with the phase of the moon. It was expected, therefore, that the b-value of the AEs would also be sensitive to tidal stress/strain fluctuations. We investigated the variation of the b-values as a function of the phase of the moon. Results show that b-values immediately following the times of full/new moon are higher than those at other times. Using AIC (Akaike Information Criterion) and random (Monte Carlo) simulations, it was confirmed that this feature is statistically significant. We also investigated whether or not there was a change in the b-values immediately before the times of full/new moon, but no statistically significant change was observed. The results suggest that the effect of stress/strain fluctuations on AE occurrences at the URL is asymmetric to the times of full/new moon.All authors are members of the Academic Robotics Group. In listing The Academic Robotics Group, the authors are endeavoring to place each of the participant institutions on an equal footing in terms of effort and authorship. M. A. Talamini is serving as presenter.     

Fractionation mechanism of stable isotope in evaporating water body

Under Rayleigh equilibrium condition, stable isotopic ratio in residual water increases with the decrease of the residual water proportion f exponentially, and the fractionation rate of stable isotopes is inversely proportional to temperature. However, under kinetic evaporation condition, the fractionation of stable isotopes is not only related to the phase temperature but also influenced by the atmospheric humidity and the mass exchange between liquid and vapor phases. The ratio δ in residual water will not change with f after undergoing evaporation of a long time for great relative humidity. The rate that the evaporating water body reaches isotopic steady state is mainly dependent on the relative humidity in atmosphere. The analysis shows that the actual mean linear variety rates, about -30.0, of the δ18O in residual water versus the residual water proportion at Nagqu and Amdo stations are consistent with the simulated process under temperature of 20 oC and relative humidity of 50%. The distillation line simulated under Rayleigh equilibrium condition is analogous to the global meteoric water line (MWL) as the temperature is about 20 oC. Under non-equilibrium condition, the slope and constant values of distillation line are directly proportional to temperature and relative humidity. According to the basic data, the simulated distillation line is very consistent with the actual distillation line of Qinghai Lake.     

形变数字化观测曲线畸变与处理——兼论资料预处理中遇到的一些问题

数字化形变台站日常下载、处理直至管理数据,都应用《数字化通讯控制软件》、《形变前兆台站(网)数据处理系统》及《形变前兆数据库服务软件(台站版)》等三个软件交互进行,在实际使用过程中会遇到一些棘手的问题。本文结合我台的观测工作的实践,总结经验,以供台站同行共享。     

浅析福建地倾斜潮汐因子γ及其组合动态特征

本文计算了福建自1992年至2004年以来的地倾斜EW和NS两分量的固体潮潮汐因子,并进行动态组合,绘制组合动态三种特征量:ΔγEW ΔγNS(表征扩容)、ΔγEW-ΔγNS(表征剪切应变)、ΔγEW/ΔγNS(表征介质各向异性)的时序曲线图,并进行固体潮特征分析,寻找中、强地震发生前远场块体和近场块体地倾斜突变性形变异常与之对应关系。结果表明:在福建沿海,海潮是决定倾斜固体潮特征的主要因素;福建发生5级上的中强地震、台湾发生7级以上强烈地震时,福建地倾斜固体潮潮汐因子及其动态组合特征存在明显的渐进式突变性形变异常现象,异常量和异常持续时间与震级和震中距有较好的对应关系。     

Prediction of creep characteristic of rock under varying environment

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.