西太平洋台风对上海地区钻孔应变的低频扰动特征分析

基于上海佘山台四分量钻孔应变仪在6次西太平洋台风期间的观测记录,利用小波分解、优势振动方向等处理方法提取出台风所激发的显著低频扰动信号,并详细分析扰动信号在时频域及空间域的表现特性.结果显示:在低频区间,台风激发的扰动信号优势周期为2～4 min,信号能量随台风进程而变化,并主要与台风量级、台风中心的位置(海上或陆域)...     

SLJ-100DH型井下数字三分向力平衡加速度计装置研制

介绍了新研制的井下数字三分向力平衡加速度计装置技术性能、工作原理,分析讨论了仪器的特点。     

气压对巴伦台钻孔倾斜的影响特征及机制研究

以巴伦台钻孔倾斜及分量应变辅助观测气压数据为研究对象,运用相关及小波分析研究气压对巴伦台钻孔倾斜的影响特征。结果表明,气压对巴伦台钻孔倾斜影响表现为准线性关系,对NS向的影响大于EW向。气压对NS向影响的显著频段有2 048～8 192、32 768～65 536 min,对EW向影响的显著频段为2 048～8 192 min。探讨了气压对巴伦台钻孔倾斜的影响机制。     

PBO钻孔应变同震响应分析

以2017-09-08墨西哥8.1 级地震为例,分析14个PBO综合钻孔应变仪和地震仪同址记录的地震波信号,结果表明,应变仪记录的地震波符合射线传播规律。对不同震中距的站点进行基于S变换的应变仪与地震仪的同震响应特征分析,二者同震响应一致性较好,应变仪频段主要在0.25 Hz以下。取震后1 h应变数据进行分析发现,同震阶段应变主方向指向震中。     

金属套管井中电磁测井响应的数值计算

分析了金属套管井中有限尺寸线圈的电磁响应特征,讨论了井眼泥浆参数、套管参数和不同线圈尺寸对电磁测井响应的影响,考察了金属套管中电磁测井对地层电阻率变化的灵敏度.径向非均匀介质的模拟计算表明,在套管井中井眼泥浆对电磁测井的影响较大,必须进行校正.在低频条件下,井间测量响应中金属套管与地层的电磁响应是非耦合的,两者可以分离.在套管参数一定时,套管响应与地层的响应的比值近似一个常数.电磁响应对地层电阻变化的灵敏度分析显示,井间电磁测量在储层研究尺度对地层电阻率变化响应灵敏,套管引起的衰减稳定.在其它参数相同的前提下,线圈直径的增大有助于有效电磁响应信号的增强,给大井间距测量提供了可能.不同磁导率金属套管的电磁响应分析表明,电磁测井中,采用非磁性或弱磁性套管要优于一般的铁磁性套管.     

Observations of geomagnetic pulsations and variations with a new borehole magnetometer down to depths of 3000 m

b
A triaxial magnetometer has been developed for investigating the in situ skin effect of horizontal geomagnetic pulsations and variations in deep boreholes. The observations were carried out in the pilot borehole of the Continental Deep Drilling Program of Germany (KTB) down to depths of 3000 m and up to temperature of 90 C. A weak skin effect, due to the known very low conductivity of the penetrated crystalline rocks, of 90 to 95 per cent in amplitude and -5 to -10 rotation in phase has been observed at periods of 10 s and magnetometer depth of 2400 m.
An essential prerequisite for all calculations is the accurate determination of the orientation of the downhole magnetometer. It is demonstrated how oriented record samples of temporal variations at depth correlate precisely with those from the surface.
Results from surface magnetotelluric (MT) investigations show strong local distortions of the telluric field. The distortion of the MT tensor response has been determined by means of newly introduced skin-effect transfer functions, which are assumed to be undistorted.     

苏北平原井下摆观测效果的讨论

文章以江苏省大丰台、盐城台、淮阴台、海安台，射阳台井下摆观测为例。比较它们的观测结果，分析认为井下摆的观测效果不仅与地面复盖层的厚度有关，而且与井下摆周围的环境干扰，观测用井的质量有关。为了提高井下摆观测效果，应尽量减少环境干扰，并注意井的垂直度和固井，文章还指出，沿海地区井下摆受海浪干扰相当显著的。     

Borehole pressure correction equation

Conclusion A method of calculation for borehole pressure has been developed and compared to measured data for PETN. The results show that by adjusting the ratio of the specific heats using an equation derived from a curve fit of a pressure as a function of decoupling ratio graph, the plot shifts to a position within the ranges of the measured data. Also, at this point the proper specific heat may be obtained for a given gaseous mixture. Although other mixtures have been considered the results are not yet conclusive, but preliminary values seem to hold for the methodology used.     

Investigation of electrical anisotropy in the deep borehole KTB

Information about electrical anisotropy in and around the deep borehole of the German Continental Deep Drilling Program (KTB) has been acquired using three different methods: (1) Under surface temperature and pressure conditions, the azimuthal dependence of resistivity has been measured in horizontal planes perpendicular to the axes of drill cores. (2) Simulated in-situ conditions (high temperature and pressure) have been applied to mini cores drilled at different orientations to structural features such as foliation. The resistivity was then measured in the direction of the mini cores' long axes. (3) Under quasi-in-situ (downhole) conditions, the azimuthal dependence of resistivity has been measured in horizontal planes using the Azimuthal Resistivity Imager (ARI), a down hole logging tool.These investigations have shown that electrical anisotropy is strongly related to structural features. The anisotropy of gneisses is the highest due to the strong foliation (averaged anisotropy factor 2.8). Lamprophyres are most isotropic (factor 1.2). Most rocks from KTB are amphibolites with intermediate anisotropies (factor 1.3). The anisotropies measured under surface temperature and pressure conditions and quasi-in-situ conditions on amphibolites are approximately the same, whereas anisotropies under simulated in-situ conditions are partially higher.Furthermore, the anisotropies measured on the cm to m scale using the various methods outlined above shall be compared with large scale anisotropies of the km scale measured around KTB using Magneto Tellurics.