新型移动三维激光扫描技术在盾构管片椭圆度检测中的应用

铁运营阶段对隧道结构的变形监测保证了地铁运行的安全,而椭圆度检测是地铁隧道结构检测的重要工作。本文简单介绍了传统椭圆度检测的基本方法,分析了新型移动三维激光扫描检测系统基本原理及隧道椭圆度检测的方法和处理流程。通过工程案例实际应用以及对检测结果的综合分析,证明了移动三维激光扫描技术在盾构管片椭圆度检测中的优势。     

近景摄影测量支持下的地铁盾构管片姿态测量方法及其应用

传统的地铁盾构管片姿态测量的方法存在作业时间长,与施工流水线交叉作业劳动量大,且无法实时测量等不足。本文提出了利用近景摄影测量的方法对盾构管片姿态进行测量,通过在盾构管片环上铺设人工标志点,使用数码相机进行拍摄,利用光束法平常对摄影图片进行数据解算,得到解算标志点坐标后,再根据空间三点定圆心原理确定盾构环圆心点的坐标。试验结果表明,对比传统测量方法,新方法误差不超过3 cm,能够完全满足盾构管片姿态的测量精度要求,具有很好的推广价值。     

坐标转换模型在盾构姿态计算中的应用

在附有条件的间接平差模型的基础上,提出用归一化大角度坐标转换模型计算盾构机姿态,并从其原理、方法以及精度上进行了分析。应用结果表明:利用坐标转换法计算盾构机姿态,与常规解方程法相比较更能有效利用参考点的所有信息,计算过程简明,且便于程序实现。     

非常规电测深法在工程地质勘查中的应用

本文提出了“非常规电测深法”的概念及实际操作过程,阐述了其应用条件和效果.存在高阻屏蔽层时电法解释较为困难.针对这一情况,本文提出了高阻屏蔽层影响的校正方法,提高了电法解释的精度和效果.     

船载物探电子设备的接地问题及解决方案

船栽物探电子设备,是一个电气结合复杂的数据采集记录系统.各系统电子线路因船舶配电方式、工作环境的特殊性,其接地很重要,但容易被忽视.而接地处理不当,在使用时会受到噪声干扰、振荡;或造成仪器的输出榆入电路损坏,不能正常工作.更严重地甚至机壳漏电,危及人身安全.船栽物探电子设备接地问题.可分为"接地保护"和"接地故障"."接地保护"是将电气设备的金属外壳、支架和电缆的护套与大地等单位的金属船体(船壳)作永久性良好的电气连接,它分为保护接地和功能接地."接地故障"是指因设备不正确接地或由于绝缘层的破损、老化及环境恶劣引起绝缘电阻低下或者接地干扰等问题.文中从船载物探电子设备的使用特性出发.讨论在实际接地处理中出现问题的原因,分析了各种接地干扰的原理.并提出了相应的解决方案,对于船栽物探电子设备的实际安装应用有一定的指导意义.     

南极涛动异常及其对冬春季北半球大气环流影响的数值模拟试验

利用IAP9L-AGCM模式考察了模式中与南极涛动异常相关的海温敏感区,发现南半球高纬海温异常能够强迫出南极涛动异常,而赤道东太平洋海温异常与太平洋南美型密切相关.研究了南极涛动异常对冬春季北半球大气环流及亚洲北部气温的影响,结果表明,南极涛动加强,能够引起北半球高纬环流异常和欧亚西风加强,以及亚洲北部地表气温和850 hPa气温显著增温.数值模拟支持了已有的诊断结果,也证实了冬春季节南极涛动异常下两半球高纬间的经向遥相关存在.     

近年日本的隧道施工与抗震设计

根据日本国家TC28委员会提交的一份当前日本地下工程施工技术报告,介绍了当前盾构工法、NATM工法在日本城市隧道施工中的应用。同时还介绍1995年阪神大地震以后,在日本隧道结构中的抗震设计。     

The Temaguessine Fe-cordierite orbicular granite (Central Hoggar, Algeria): U–Pb SHRIMP age, petrology, origin and geodynamical consequences for the late Pan-African magmatism of the Tuareg shield

The Temaguessine high-level subcircular pluton is intrusive into the LATEA metacraton (Central Hoggar) Eburnian (2 Ga) basement and in the Pan-African (615 Ma) granitic batholiths along a major NW–SE oriented major shear zone. It is dated here (SHRIMP U–Pb on zircon) at 582 ± 5 Ma. Composed of amphibole–biotite granite and biotite syenogranite, it comprises abundant enclaves: mafic magmatic enclaves, country-rock xenoliths and remarkable Fe-cordierite (#Fe = 0.87) orbicules. The orbicules have a core rich in cordierite (40%) and a leucocratic quartz–feldspar rim. They are interpreted as resulting from the incongruent melting of the meta-wacke xenoliths collapsed into the magma: the breakdown of the biotite + quartz assemblage produced the cordierite and a quartz–feldspar minimum melt that is expelled, forming the leucocratic rim. The orbicule generation occurred at T < 850° and P < 0.3 GPa. The Fe-rich character of the cordierite resulted from the Fe-rich protolith (wacke with 4% Fe₂O₃ for 72% SiO₂). Strongly negative ε_Nd (−9.6 to −11.2), Nd T_DM model ages between 1.64 and 1.92 Ga, inherited zircons between 1.76 and 2.04 Ga and low to moderately high I_Sr (0.704–0.710) indicate a Rb-depleted lower continental crust source for the Temaguessine pluton; regional considerations impose however also the participation of asthenospheric material. The Temaguessine pluton, together with other high-level subcircular pluton, is considered as marking the end of the Pan-African magma generation in the LATEA metacraton, resulting from the linear delamination along mega-shear zones, allowing asthenospheric uprise and melting of the lower continental crust. This implies that the younger Taourirt granitic province (535–520 Ma) should be considered as a Cambrian intraplate anorogenic event and not as a very late Pan-African event.     

Geothermal energy prospects in Brazil: A preliminary analysis

Results of geothermal gradient measurements in 44 localities in Brazil are presented. The Precambrian shield areas are found to be characterized by relatively low temperature gradients in the range 6 to 20°C/km while younger sedimentary basins are characterized by gradients in the range 15 to 35°C/km. An inverse correlation between geothermal gradient and tectonic age has been observed. This as well as the favourable hydrological conditions suggest that the best sites for extraction of geothermal energy in Brazil are the younger sedimentary basins. The Parana Basin is found to offer at present the best site for extraction of geothermal energy in Brazil. Preliminary examination of the temperature distributions in the major aquifer (Botucatu sandstone) suggest that this aquifer contains substantial quantities of warm waters in the temperature range 40 to 90°C. The water layer in this confined aquifer is in convective motion and can be considered as a low enthalphy geothermal system. Many of the routine uses to which geothermal waters are put, such as space heating and soil warming, are not applicable in Brazil mainly because of the favourable climatic conditions. Conversion of this geothermal energy into electrical energy is also unlikely to be economical. Hence we do not consider the Parana Basin geothermal system as an independent ec9nomically exploitable energy resource. However, a few other applications are pointed out where geothermal waters can be used as a supplementary or supporting energy source in increasing the efficiency of economically viable systems utilizing hot waters.     

Changes in stream water quality due to logging of the boreal forest in the Montmorency Forest,Québec

Summer stream water quality was monitored before and following the logging of 50% of the boreal forest within three small watersheds (<50 ha) nested in the ‘Ruisseau des Eaux‐Volées’ Experimental Watershed, Montmorency Forest (Québec, Canada). Logging was conducted in winter, on snow cover according to recommended best management practices (BMPs) to minimize soil disturbance and protect advance growth. A 20‐m forest buffer was maintained along perennial streams. In watershed 7·2, cut‐blocks were located near the stream network and logging was partially allowed within the riparian buffer zone. In watersheds 7·5 and 7·7, logging occurred farther away from the stream network. Observations were also made for watershed 7·3 that collected the runoff from watersheds 7·2 and 7·5, and watershed 7·6, the uproad portion of watershed 7·7. The control watershed 0·2 was contiguous to the impacted watersheds and remained undisturbed. Following clearcutting, changes in summer daily maximum and minimum stream temperatures remained within ± 1 °C while changes in diurnal variation did not decrease by more than 0·5 °C. Concentrations of NO₃^? greatly increased by up to 6000% and concentrations of K⁺ increased by up to 300% during the second summer after logging. Smaller increases were observed for Fe_total (up to 71%), specific conductance (up to 26%), and Mg²⁺ (up to 19%). Post‐logging pH decreased slightly by no more than 7% while PO₄^3? concentration remained relatively constant. Suspended sediment concentrations appeared to increase during post‐logging, but there was not enough pre‐logging data to statistically confirm this result. Logging of moderate intensity and respecting established BMPs may account for the limited changes of water quality parameters and the low exceedances of the criteria for the protection of aquatic life. The proximity of the cutover to the stream network and logging within the riparian zone did not appear to affect water quality. Copyright © 2008 John Wiley & Sons, Ltd.