单桩竖向抗压极限荷载的极限状态与确定

本文通过对桩的荷载传递和沉降分析，研判了桩的极限载荷的极限状态，并结合工程实例予以说明。根据文献提供的资料，建议桩的极限荷载宜采用Ｓ－ｌｏｇＰ法确定。     

考虑弯曲刚度的悬索面内自由振动解析解

对索的准确模拟有时应考虑弯曲刚度的影响.在已有研究基础上,考虑弯曲刚度对悬索静力构形的影响,分别推导了两端固结和两端铰接边界条件下水平悬索面内自由振动的解析解,并修正了已有文献中的不足之处,该解在理论上较已有解析解更为准确,它可看作是已有文献在均匀索情况下的解析解.本文推导的解析解具有一定的理论意义.     

Iterative implicit integration procedure for hybrid simulation of large nonlinear structures

A fully implicit iterative integration procedure is presented for local and geographically distributed hybrid simulation of the seismic response of complex structural systems with distributed nonlinear behavior. The purpose of this procedure is to seamlessly incorporate experimental elements in simulations using existing fully implicit integration algorithms designed for pure numerical simulations. The difficulties of implementing implicit integrators in a hybrid simulation are addressed at the element level by introducing a safe iteration strategy and using an efficient procedure for online estimation of the experimental tangent stiffness matrix. In order to avoid physical application of iterative displacements, the required experimental restoring force at each iteration is estimated from polynomial curve fitting of recent experimental measurements. The experimental tangent stiffness matrix is estimated by using readily available experimental measurements and by a classical diagonalization approach that reduces the number of unknowns in the matrix. Numerical and hybrid simulations are used to demonstrate that the proposed procedure provides an efficient method for implementation of fully implicit numerical integration in hybrid simulations of complex nonlinear structures. The hybrid simulations presented include distributed nonlinear behavior in both the numerical and experimental substructures. Copyright © 2010 John Wiley & Sons, Ltd.     

钢筋混凝土桥墩开裂刚度计算

以基本的力学理论为依据,对双筋矩形截面混凝土墩柱的受力模式进行简化,通过力学平衡方程,从理论上分析了墩柱受力过程中开裂区域的刚度。在此基础上,引入了三段式的概念,并通过三段式思想推算出截面刚度的简化公式。根据简化公式计算出力-位移曲线,继而推算出混凝土墩柱整体刚度。     

Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems

The distinct element method (DEM) has been used successfully for the dynamic analysis of rigid block systems. One of many difficulties associated with DEM is modeling of damping. In this paper, new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid multi-block systems. The stiffness proportional damping is constructed for the prescribed damping ratio, based on the non-zero fundamental frequency effective during the time interval while the boundary conditions remain essentially constant. At this time interval, the fundamental frequency can be estimated without complete eigenvalue analysis. The damping coefficients will vary while the damping ratio remains the same throughout the entire analysis. A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases. These procedures were implemented in the development of the distinct element method for the dynamic analyses of piled multi-block systems. The analysis results for the single-block and two-block systems were in a good agreement with the analytic predictions. Applications to the seismic analyses of piled fourblock systems revealed that the new procedures can make a significant difference and may lead to much-improved results.     

GPS折射角资料的变分同化试验

越来越多的新型观测资料为数值天气预报水平的进一步提高提供了许多新的机会。在各种新型的观测资料中,GPS(全球定位卫星系统)折射角资料无疑是非常重要的。GPS折射角资料具有分辨率高、全天候探测、覆盖全球等优点,实现对GPS折射角资料的变分同化,将具有非常重要的意义。文中介绍了如何获得及同化GPS折射角资料的原理。对GPS折射角资料的变分同化可以分为两种:间接同化和直接同化,文中对这两种方法都作了具体介绍。在变分同化的最小化过程中,计算效率无疑是最重要的,而优化步长的计算又直接关系到算法效率的成败。根据最小化算法的特点,通过数学推导,得出一种适合于各种最小化算法的计算优化步长的自适应方法。最后,还利用1995年10月11日的GPS折射角资料进行了数值试验,结果表明了变分同化方法和计算优化步长方法的有效性。     

掩星弯角资料同化在一次暴雨过程中的应用

使用GPS掩星弯角资料和NCEP预报场资料,采用GSI(Grid-point Statistical Interpolation)变分同化系统,对同化掩星弯角资料前后的分析场以及数值预报结果进行详细比较,分析了弯角资料同化对2012年7月21日北京特大暴雨预报结果的影响。结果表明,同化掩星弯角资料对初始场中的温度、湿度产生明显影响,500 hPa和700 hPa温度调整中心量值达到0.5℃和-0.6℃,700 hPa湿度调整中心最大量值达-0.14 kg·kg-1;同化过程改变了强降水发生前流场结构,明显提高了强降水中心位置、雨带走向及范围、降水强度的预报准确性;由降水TS评分可知,200 mm以上大暴雨模拟改善效果明显,但对弱降水预报效果较差。     

东胜体育场钢结构施工临时支撑体系监测

东胜体育场是我国目前国内规模最大的开闭顶体育建筑,固定屋盖和巨拱使用大跨度钢桁架结构,采用分段拼装的方法施工,在施工期间屋盖和巨拱的1万吨重力荷载大部分由临时支撑体系承担,为保障支撑体系的安全,在钢结构施工期间,对临时支撑体系垂直度、侧向弯曲,位移、基础沉降进行动态监测。本文介绍了监测方法和监测结果,对类似工程有借鉴意义。     

齿轮弯曲强度的有限元分析法

论述了齿轮弯曲强度的有限元分析方法，同传统的方法相比能准确地获得齿轮的真实应力场，为齿轮强度计算提供可靠的依据。     

基于OpenSees的RCS组合框架结构抗震性能模拟分析

选取已有钢筋混凝土柱—钢梁组合结构（RCS）框架的低周期反复试验数据,采用地震工程开源模拟软件OpenSees对其进行有限元模拟,对比骨架曲线与滞回曲线,试验结果与有限元结果吻合较好。随后考察弯矩放大系数（Mc/Mb=0.86、1.48、2.04）、柱轴压比（n=0.06、0.2、0.3、0.6、0.8）对抗震性能的影响,得到了各参数下框架的滞回曲线、骨架曲线和各特征阶段的荷载与位移值。分析了框架的破化过程、延性与强度退化。结果表明：RCS组合框架滞回曲线饱满,具有良好的变形及耗能能力;随着弯矩放大系数的减小、柱轴压比的增大,框架的水平极限承载力降低、屈服状态提前、位移延性降低。分析结果可供有关研究或工程应用参考。